Indicators for sustainable energy development: Brazil's case study

This article summarizes the results of the project on indicators for sustainable energy development (ISED) in Brazil. The project's aim was to present energy related economic, social and environmental data to policy makers in a coherent and consistent form, showing interlinkages, time‐series and cross‐sectoral analyses and assess energy policy. Two priority areas assessed by these indicators, regarding the country's energy supply and demand, helped in the identification of a number of energy policy options that focused on specific aspects of the country's energy sector. On the supply side, these options include the development and stimulation of renewable energy, such as small‐scale hydroelectric, wind, solar photovoltaic power and bagasse cogeneration; stimulation of programmes for ethanol use as automotive fuel and sugarcane bagasse cogeneration; and implementation of natural gas‐fired, combined heat and power (CHP) plants. On the demand side, policy options include: the full implementation of the law on efficiency standards for appliances; expansion of utility investment in end‐use energy efficiency; adoption of targets and protocols to reduce energy intensity in the industrial sector; improvement of passenger transport efficiency; and the creation of a fund to improve energy affordability for the poor.     

Indicators for sustainable energy development in Mexico

This article presents a summary of a study on the application to the Mexican energy sector of a core set of indicators for sustainable energy development (ISED), developed by the International Atomic Energy Agency (IAEA). The study focused on the elaboration of socio‐economic and environmental indicators related to energy production and use, and was aimed at assessing Mexico's existing energy policies and identifying strategies and possible policies that could bring about improvements in major priority areas: energy intensity, atmospheric emissions, energy import dependency and use of renewables. While positive trends have been observed in relation to energy intensity and atmospheric emissions, Mexico is becoming more dependent on imports of gasoline, natural gas and other high‐value secondary energy sources, while exporting significant amounts of primary fuels, such as crude oil. Also, no significant increase has been observed in the use of renewable sources of energy. Social, economic and environmental policies need to be formulated for the energy sector and related investments (public and private) reinforced so that all economic sectors have access to energy from cleaner and more diverse sources.     

Energy indicators and sustainable development: The International Energy Agency approach

The International Energy Agency (IEA), together with the International Atomic Energy Agency (IAEA), UN‐DESA, Eurostat and the European Environmental Agency, has recently published a comprehensive joint‐agency overview of energy indicators for sustainable development. The IEA's contribution to this publication is based on the IEA energy indicator approach. This approach has been developed and used by the IEA over a number of years. The indicators advocated by the IEA are relatively disaggregated to allow for meaningful analysis of sustainability issues in the energy sector. Using a decomposition approach helps reveal the causal links between human/economic driving forces, energy use and emissions. This article presents examples of IEA's work with indicators and an overview of the methodology used, including an explanation of the link to sustainable development. It also provides an example of a simplified indicator analysis of India, to illustrate the importance of improved data systems in developing indicators that can provide meaningful policy analysis.     

Operational Indicators for Measuring Agricultural Sustainability in Developing Countries

This paper reviews relevant literature on the sustainability indicators theoretically proposed and practically applied by scholars over the past 15 years. Although progress is being made in the development and critical analysis of sustainability indicators, in many cases existing or proposed indicators are not the most sensitive or useful measures in developing countries. Indicator selection needs to meet the following criteria: relative availability of data representing the indicators, sensitivity to stresses on the system, existence of threshold values and guidelines, predictivity, integratability and known response to disturbances, anthropogenic stresses, and changes over time. Based on these criteria, this paper proposes a set of operational indicators for measuring agricultural sustainability in developing countries. These indicators include ecological indicators involving amounts of fertilizers and pesticides used, irrigation water used, soil nutrient content, depth to the groundwater table, water use efficiency, quality of groundwater for irrigation, and nitrate content of both groundwater and crops. Economic indicators include crop productivity, net farm income, benefit–cost ratio of production, and per capita food grain production. Social indicators encompass food self-sufficiency, equality in food and income distribution among farmers, access to resources and support services, and farmers knowledge and awareness of resource conservation. This article suggests that the selection of indicators representing each aspect of sustainability should be prioritized according to spatial and temporal characteristics under consideration.     

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates

BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.     

Fuzzy decision analysis for integrated environmental vulnerability assessment of the mid-Atlantic Region

A fuzzy decision analysis method for integrating ecological indicators was developed. This was a combination of a fuzzy ranking method and the analytic hierarchy process (AHP). The method was capable of ranking ecosystems in terms of environmental conditions and suggesting cumulative impacts across a large region. Using data on land cover, population, roads, streams, air pollution, and topography of the Mid-Atlantic region, we were able to point out areas that were in relatively poor condition and/or vulnerable to future deterioration. The method offered an easy and comprehensive way to combine the strengths of fuzzy set theory and the AHP for ecological assessment. Furthermore, the suggested method can serve as a building block for the evaluation of environmental policies.     

Ecosystem approaches to environmental quality assessment

Environmental quality assessment has to focus more on the quality of whole ecosystems, instead of focusing on the direct effects of a specific stressor, because of a more integrated environmetal policy approach. Yet, how can the ecosystem quality be measured? Partly this is a normative question, a question of what is considered good and bad. At the same time, it is a scientific question, dealing with the problem of low the state of a system as complex as an ecosystem could be measured. Measuring all abiotic and biotic components, not to mention their many relationships, is not feasible. In this article we review several approaches dealing with this scientific question. Three approaches are distinguished; they differ in type of variable set and ecosystem model used. As a result of this, the information about the state of the ecosystem differs: ultimate breadth, comprising information about the whole ecosystem, is at the expense of detail, while ultimate detail is at the expense of breadth. We discuss whether the resultant quality assessments differ in character and are therefore suitable to answer different policy questions.     

DISTRIBUTION OF BENTHIC MACROINVERTEBRATES IN A STREAM EXPOSED TO URBAN RUNOFF1

ABSTRACT: A study of benthic macroinvertebrate community composition was conducted at eight sites along Shabakunk Creek, a small stream in Mercer County, New Jersey, which receives urban runoff. The relationship between changes in substrate composition and the nature of the benthic macroinvertebrate community has been examined. Organisms were collected seasonally from natural substrates in riffles. Attempts to employ artificial substrates for invertebrate collection proved unsuccessful, as the population on the samplers was not representative of that in the stream bed. Number of total benthic macroinvertebrate taxa collected declined from 13 in relatively undeveloped upstream areas to four below heavily developed areas, while population density decreased simultaneously in the same areas. Periphyton samples collected from natural substrates were analyzed for selected heavy metals. Significantly higher heavy metal concentrations are reported from substrates sampled below heavily developed areas, and changes in these values are discussed with regard to changes in benthic macroinvertebrate distribution.     

Occurrence of potential bacterial pathogens in coastal areas of the Adriatic Sea

A monitoring program was carried out in bathing waters along the sea-coast of the Adriatic Sea. The investigation was aimedat obtaining a quali-quantitative picture of microorganisms ofanthropic origin and of a more strictly autochthonous origin and at verifying the existence of possible reciprocal correlations and combinations of relationship between them. Results showed that the concentrations of indicators of faecal contamination, whether within or over the values established by legislation, are not always related to the presence and density of microorganisms of environmental origin but the regression modelsused can help to describe how these latter microorganisms can bein relation to levels of the other parameters. The difficultyis evident of the predictability of health effects swimming-associated; for this reason more complex models that are currently used should be taken into account for minimising the risk for bathers.     

Incidence of stress in benthic communities along the U.S. Atlantic and Gulf of Mexico coasts within different ranges of sediment contamination from chemical mixtures

Synoptic data on concentrations of sediment-associated chemical contaminants and benthic macroinfaunal community structure were collected from 1,389 stations in estuaries along the U.S. Atlantic and Gulf of Mexico coasts as part of the nationwide Environmental Monitoring and Assessment Program (EMAP). These data were used to develop an empirical framework for evaluating risks of benthic community-level effects within different ranges of sediment contamination from mixtures of multiple chemicals present at varying concentrations. Sediment contamination was expressed as the mean ratio of individual chemical concentrations relative to corresponding sediment quality guidelines (SQGs), including Effects Range-Median (ERM) and Probable Effects Level (PEL) values. Benthic condition was assessed using diagnostic, multi-metric indices developed for each of three EMAP provinces (Virginian, Carolinian, and Louisianian). Cumulative percentages of stations with a degraded benthic community were plotted against ascending values of the mean ERM and PEL quotients. Based on the observed relationships, mean SQG quotients were divided into four ranges corresponding to either a low, moderate, high, or very high incidence of degraded benthic condition. Results showed that condition of the ambient benthic community provides a reliable and sensitive indicator for evaluating the biological significance of sediment-associated stressors. Mean SQG quotients marking the beginning of the contaminant range associated with the highest incidence of benthic impacts (73–100% of samples, depending on the province and type of SQG) were well below those linked to high risks of sediment toxicity as determined by short-term toxicity tests with single species. Measures of the ambient benthic community reflect the sensitivities of multiple species and life stages to persistent exposures under actual field conditions. Similar results were obtained with preliminary data from the west coast (Puget Sound).