Ozone tolerance in Phaseolus vulgaris depends on more than one mechanism

Two bean cultivars with different sensitivity to ozone, i.e. the O₃-sensitive Cannellino and the O₃-tolerant Top Crop, were exposed to acute O₃-stress (165 nL L⁻¹) with the aim of evaluating physiological and biochemical traits that may confer O₃-tolerance. Stomatal conductance was smaller and the ability to dissipate excess energy, via regulated and unregulated nonphotochemical quenching mechanisms was greater in Top Crop than in Cannellino. These morphological and physiological-traits allowed the O₃-tolerant cultivar to compensate for the light-induced declines in Φ_PSII, to preserve photosystem II from excitation-energy, and likely to prevent the generation of ROS to a superior degree than the O₃-sensitive cultivar. Furthermore, the potential capacities to reducing the superoxide anion and H₂O₂ were significantly greater in Top Crop than in Cannellino. These findings are consistent with the early accumulation of H₂O₂, the almost complete disruption of cell structure, and irreversible damages to the photosynthetic apparatus observed in the O₃-sensitive cultivar.     

Experimental evaluation of PCDD/Fs and PCBs release and mass balance of a WTE plant

The behaviour of waste incineration plants with respect to organic toxic trace contaminants such as PCDDs, PCDFs and, to a minor extent, PCBs, is still a matter of concern for the public opinion and the decision makers. It is therefore very important, first, to evaluate the release of these organic toxic trace contaminants in the environment during waste incineration, not only through the stack gas emission but also with the solid and liquid residues, and then to compare the total release with the input through the treated waste in order to assess the plant behaviour as a “sink” rather than a “source” of organic toxic trace contaminants. The experimental investigation carried out on an Italian full scale incineration plant has shown a total 17 PCDD/Fs and 12 dioxin-like PCBs release of 5.5-27 μg WHO-TEQ per tonne of treated waste and an input flux of 1.6-44 μg WHO-TEQ per tonne of waste, with the difference between the input and the output fluxes rather small and the plant behaviour toward organic trace toxic contaminants in average neutral. Results are compared with similar evaluations conducted in the last decade on a number of waste-to-energy (WTE) plants operating in Italy.     

内蒙古乌拉特后旗新兴矿业城市循环经济发展模式研究

内蒙古乌拉特后旗2001年之前一直是国家级贫困县,2003年以来,该旗将矿产资源优势转变为资产优势,通过发展矿业产业经济,一跃成为人均GDP超上海的富裕县,从农牧业为主县转变为工业为主县。这一转变是对草原及生态环境的巨大威胁。通过实地考察,调查研究齐华矿业公司经济发展经验,提出资源综合开发利用与生态平衡发展模式,该模式达到了工业发展起点高、污染破坏最小化的目标,同时经济得到了可持续发展。     

Rainfall Runoff Relationships for a Cloud Forest Watershed in Central America: Implications for Water Resource Engineering1

Caballero, Luis A., Alon Rimmer, Zachary M. Easton, and Tammo S. Steenhuis, 2012. Rainfall Runoff Relationships for a Cloud Forest Watershed in Central America: Implications for Water Resource Engineering. Journal of the American Water Resources Association (JAWRA) 48(5): 1022‐1031. DOI: 10.1111/j.1752‐1688.2012.00668.x Abstract: Understanding the basic relationships between rainfall and runoff is vital for effective management and utilization of scarce water resources. Especially, this is important in Central America with widespread potable water shortage during the dry months of the monsoon. Potential good water sources are cloud forests, but little information concerning its potential is available to water supply engineers. Our objective is to define rainfall‐runoff‐base flow relationships for a cloud forest catchment. Flumes were installed for measuring river flow in four subwatersheds in La Tigra National Park, Honduras. One of the four watersheds was a 636‐ha subwatershed (WS1) with 60% cloud forest coverage. Precipitation averaged 1,130 mm/yr over the entire basin. About half of the total rainfall became runoff for the cloud forest watershed whereas, for the adjacent undisturbed forested watershed, the total discharge was <20% of the amount of precipitation. Infiltration rates were generally greater than rainfall rates. Therefore, most rainfall infiltrated into the soil, especially in the upper, steep, and well‐drained portions of the watershed. Direct runoff was generated from saturated areas near the river and exposed bedrock. This research provides compelling evidence that base flow is the primary contributor to streamflow during both wet and dry seasons in cloud forest catchments. Protecting these flow processes over time is critical for the sustained provision of potable water.     

BETR global--a geographically-explicit global-scale multimedia contaminant fate model

We present two new software implementations of the BETR Global multimedia contaminant fate model. The model uses steady-state or non-steady-state mass-balance calculations to describe the fate and transport of persistent organic pollutants using a desktop computer. The global environment is described using a database of long-term average monthly conditions on a 15° × 15° grid. We demonstrate BETR Global by modeling the global sources, transport, and removal of decamethylcyclopentasiloxane (D5).     

The behaviors and fate of polycyclic aromatic hydrocarbons (PAHs) in a coking wastewater treatment plant

The occurrence, behaviors and fate of 18 PAHs were investigated in a coking wastewater treatment plant in Songshan coking plant, located in Shaoguan, Guangdong Province of China. It was found that the target compounds occurred widely in raw coking wastewater, treated effluent, sludge and gas samples. In raw coking wastewater, high molecular weight (MW) PAHs were the dominant compounds, while 3-6 ring PAHs predominated in the final effluent. The dominant compounds in gas samples were phenathrene, fluoranthene and pyrene, while they were fluoranthene, pyrene, chrysene and benzo[k]fluoranthene for sludge. The process achieved over 97% removal for all the PAHs, 47-92% of eliminations of these target compounds in liquid phase were achieved in biological stage. Different behaviors of PAHs were observed in the primary tank, anaerobic tank, aerobic tank, hydrolytic tank and coagulation tank units, while heavier and lower ones were mainly removed in anaerobic tank and aerobic tanks, respectively. Regarding the fate of PAHs, calculated fractions of mass losses for low MW PAHs due to transformation and adsorption to sludge accounted for 15-50% and 24-49%, respectively, while the rest was less than 1%. For high MW PAHs, the mass losses were mainly due to adsorption to sludge and separation with tar (contributing 56-76% and 22-39%, respectively), and the removal through transformation was less.     

Model Development for Nutrient Loading Estimates from Paddy Rice Fields in Korea

Abstract

A field experiment was performed to evaluate water and nutrient balances in paddy rice culture operations during 2001–2002. The water balance analysis indicated that about half (50–60%) of the total outflow was lost by surface drainage, with the remainder occurring by evapotranspiration (490–530 mm). The surface drainage from paddy fields was mainly caused by rainfall and forced-drainage, and in particular, the runoff during early rice culture periods depends more on the forced-drainage due to fertilization practices. Most of the total phosphorus (T-P) inflow was supplied by fertilization at transplanting, while the total nitrogen (T-N) inflow was supplied by the three fertilizations, precipitation, and from the upper paddy field, which comprised 13–33% of the total inflow. Although most of the nutrient outflow was attributed to plant uptake, nutrient loss by surface drainage was substantial, comprising 20% for T-N and 10% for T-P. Water and nutrient balances indicate that reduction of surface drainage from paddy rice fields is imperative for nonpoint source pollution control. The simplified computer model, PADDIMOD, was developed to simulate water and nutrient (T-N and T-P) behavior in the paddy rice field. The model predicts daily ponded water depth, surface drainage, and nutrient concentrations. It was formulated with a few equations and simplified assumptions, but its application and a model fitness test indicated that the simulation results reasonably matched the observed data. It is a simple and convenient planning model that could be used to evaluate BMPs of paddy rice fields alone or in combination with other complex watershed models. Application of the PADDIMOD to other paddy rice fields with different agricultural environments might require further calibration and validation.     

Quantifying Legacy Phosphorus Using a Mass Balance Approach and Uncertainty Analysis

Classic agricultural‐conservation practices may not address decades of phosphorus (P) accumulation, known as legacy P. Identifying and quantifying legacy P sources are necessary to identify the most cost‐efficient conservation practices. A method was developed to identify and quantify legacy P at the watershed scale using a mass‐balance approach and uncertainty analysis. The method was applied to two nutrient‐rich watersheds in northeast Oklahoma and northwest Arkansas. Each P import and export to and from the two watersheds was identified and quantified using a probability distribution and uncertainty analysis. The P retained in the soils, reservoirs, and stream systems were estimated from 1925 to 2015. Over 8.5 and 6.1 kg/ha/year of P were added to the Illinois River and Eucha‐Spavinaw watersheds with 53 and 55% from poultry production, respectively. Other major historical sources were attributed to human population and commercial fertilizer. Though currently the net addition of P in the watersheds is small due to the export of approximately 90% of the poultry litter, historically only 14‐19% of all P imported to the Illinois River and Eucha‐Spavinaw watersheds was removed via the reservoir spillways, poultry litter, and food exports. The majority of the retained P is located in the soil, 3.6‐5.8 kg/ha/year, and stream systems, 0.01‐3.0 per ha/year.     

A New Phosphorus Paradigm for the Baltic Proper

The external phosphorus (P) loading has been halved, but the P content in the water column and the area of anoxic bottoms in Baltic proper has increased during the last 30 years. This can be explained by a temporary internal source of dissolved inorganic phosphorus (DIP) that is turned on when the water above the bottom sediment becomes anoxic. A load-response model, explaining the evolution from 1980 to 2005, suggests that the average specific DIP flux from anoxic bottoms in the Baltic proper is about 2.3 g P m⁻² year⁻¹. This is commensurable with fluxes estimated in situ from anoxic bottoms in the open Baltic proper and from hydrographic data in the deep part of Bornholm Basin. Oxygenation of anoxic bottoms, natural or manmade, may quickly turn off the internal P source from anoxic bottoms. This new P-paradigm should have far-reaching implications for abatement of eutrophication in the Baltic proper.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0441-3) contains supplementary material, which is available to authorized users.     

工业烟气净化系统的风量平衡调节及数值模拟应用研究

为了对某钢铁集团烧结机尾气净化系统的风量平衡进行调节,提出了利用Fluent仿真软件对通风管道内部流场进行数值模拟,在主管和部分支管上设置节流管、调节管径的改进措施。风量模拟结果表明,通风管道的原风量存在严重的不平衡性,吸尘点的风量不平衡率高达75.0%,在部分管道增加节流管可以有效调整管道的风量不平衡性,调整后吸尘点风量的不平衡率为18.8%;对于压力损失较大、风量偏小的管道,可通过管径调节使其风量基本达到设计要求;Fluent仿真软件的风量模拟值与现场实测值有较高的吻合性,数值模拟方法可以为工业烟气净化系统的改造提供参考依据。不仅能够为前期工程设计提供帮助,大大节省工程调试费用,缩短工期,并有助于风量不平衡管道的调节和改造。