Fulvic acid removal by nanoparticle TiO2 using a submerged membrane photocatalysis reactor

The degradation of fulvic acid（FA） by nanoparticle TiO2 in a submerged membrane photocatalysis（SMPC） reactor was studied. In this reactor, photocatalytic oxidation and membrane separation co-occured. The continuous air supplier provided O2 for the photocatalytical reaction and mixed the solution through an airflow controller. The particle TiO2 could automatically settle due to gravity without particle agglomeration so it could be easily separated by microfiltration（MF） membrane. It was efficient to maintain high flux of membranes. The effects of operational parameters on the photocatalytic oxidation rate of FA were investigated. Results indicated that photocatalyst at 0.5 g/L and airflow at 0.06 m^3/h were the optimum condition for the removal of fulvic acid, the removal efficiency was higher in acid media than that in alkaline media. The effects of different filtration duration on permeate flux rate of MF with P25 powder and with nanoparticle TiO2 were compared. Experimental results indicated that the permeate flux rate of MF was improved and the membrane fouling phenomenon was reduced with the addition of nanoparticle TiO2 catalyst compared with conventional P25 powder. Therefore, this submerged membrane photocatalysis reactor can faciliate potential application of photocatalytic oxidation process in drinking water treatment.     

表面酸碱2步改性对活性炭吸附Cr(Ⅵ)的影响

研究了酸碱2步改性对活性炭吸附水相中Cr(Ⅵ)的影响.将活性炭(AC₀)在HNO₃溶液中氧化(AC₁),然后在NaOH和NaCl的混合液中处理(AC₂).分别采用平衡和连续吸附试验,测试Cr(Ⅵ)的吸附特征.以Boemh滴定法定量检测活性炭表面酸性官能团数量,结合元素分析结果定量表征活性炭的表面含氧官能团变化;以低温液氮(N₂/77K)吸附法分析活性炭的比表面积和孔径结构.结果表明:活性炭经2步改性后,其Cr(Ⅵ)的吸附容量和吸附速度均显著改变.吸附容量和吸附速度大小依次为AC₂>AC₁>AC₀.改性活性炭表面积下降,表面含氧酸性官能团数量增加.HNO₃液相氧化处理可使活性炭表面生成带正电含氧酸性官能团,第2步改性后活性炭表面酸性官能团H⁺部分被Na⁺取代,使活性炭表面酸性降低.表面较多的含氧酸性官能团(与AC₀相比)、适宜的表面pH(与AC₁相比)是AC₂所表现出较高Cr(Ⅵ)吸附容量的主要原因.     

硫精砂尾矿还原硫酸烧渣的研究

利用硫精砂尾矿还原硫酸烧渣，从而提高烧渣中的铁的浸出率，达到综合利用尾矿及烧渣，减轻污染的目的。结果表明，把烧渣和尾矿按４－６比１的比例混合，在７００－８００℃处理３０ｍｉｎ，铁的浸出率比处理前增加３倍。文中还讨论了还原机理。     

应用GEM法对硫酸工业中重金属污染的研究

为查明硫酸工业中主要重金属的危害以及不同制酸工艺产生的危害差异，对辽宁省主要生产硫酸企业进行了调研，并应用ＭＥＧ法，对矿石原料中重金属的含量进行了数学模型分析．     

H酸综合废水治理工艺试验研究及工程应用

针对H酸母液及T酸一次洗水高含盐量有机废水进行系统的实验研究，结果表明：废水经冷却、结晶、过滤后，用铁屑过滤，石灰乳、PAM处理．使废水COD去除率为50％，脱色率为7O％，BOD／CODcr提高到0．2以上，预期COD去除率达60％以上，BOD去除率达85％以上，NH3—N去除率达80％以上．     

氨荒酸膦酸树脂滤器的制备及其在AAS分析中的应用

本文介绍了氨荒酸膦酸树脂过滤器的制备方法，以及应用该过滤器分离与富集地面水、海水中Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ多元素的适用条件。实际样品中的Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ等重金属离子经过过滤器过滤，被吸附在树脂滤层中，用少量酸洗脱，以ＡＡＳ测试，结果稳定、准确度高。此过滤器在痕量分析中具有很高的应用价值。     

合成盐酸中酸性废水的综合治理

对合成盐酸中的酸性废水循环利用,并用此酸性水作为生产普通盐酸的吸收水.实践证明,该方法是一种行之有效的治理途径,有较好的环境和经济效益.     

皂角苷和柠檬酸联合对市政污泥中重金属的去除与风险评价

污泥的重金属污染严重制约其资源化利用,为探讨皂角苷和柠檬酸联合淋洗去除污泥中重金属的效果,为污泥的资源化利用提供理论依据,以武汉市4个市政污泥样品(S1、S2、S3、S4)为研究对象,选取1％的皂角苷和0.1 mol/L的柠檬酸联合淋洗1?4次,对淋洗前后污泥中重金属Cu、Ni、Pb、Zn、Cd和Cr的含量和形态进行了...     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

青岛酸雨天气边界层气象特征

青岛地区酸雨成因研究表明,青岛市近代工业发展排放大量致酸物质、海洋上天然排放的二甲基硫是重要的原因;青岛地区边界层风场和温度场的特殊规律是形成酸雨的另一个重要原因;江淮气旋和黄淮气旋大型天气形势起了辅助作用。本文着重分析研究了1993年7月23日一次典型酸雨的实际例子,证明了上述论点。