不同类型压力对飞行员安全绩效的影响规律研究

为探究各类型压力对飞行员安全绩效的影响规律,为飞行员日常工作管理提供依据,选取某航空公司200名飞行员进行压力测试,并调取其近6 a的飞机品质(QAR)数据,通过相关性分析和线性回归分析将飞行员压力数据与其QAR数据进行对比分析,探究飞行员压力对飞行安全绩效的影响规律。研究结果表明:工作负荷压力、家庭压力、人际关系压力和组织管理压力会显著负向影响飞行员安全绩效;角色压力和专业发展压力会显著正向影响飞行员安全绩效。     

Validation of a booted finite element model of the WIAMan ATD lower limb in component and whole-body vertical loading impacts with an assessment of the boot influence model on response

Objective: A novel anthropomorphic test device (ATD) representative of the 50th percentile male soldier is being developed to predict injuries to a vehicle occupant during an underbody blast (UBB). The main objective of this study was to develop and validate a finite element (FE) model of the ATD lower limb outfitted with a military combat boot and to insert the validated lower limb into a model of the full ATD and simulate vertical loading experiments.

Methods: A Belleville desert combat boot model was assigned contacts and material properties based on previous experiments. The boot model was fit to a previously developed model of the barefoot ATD. Validation was performed through 6 matched pair component tests conducted on the Vertically Accelerated Loads Transfer System (VALTS). The load transfer capabilities of the FE model were assessed along with the force-mitigating properties of the boot. The booted lower limb subassembly was then incorporated into a whole-body model of the ATD. Two whole-body VALTS experiments were simulated to evaluate lower limb performance in the whole body.

Results: The lower limb model accurately predicted axial loads measured at heel, tibia, and knee load cells during matched pair component tests. Forces in booted simulations were compared to unbooted simulations and an amount of mitigation similar to that of experiments was observed. In a whole-body loading environment, the model kinematics match those recorded in experiments. The shape and magnitude of experimental force–time curves were accurately predicted by the model. Correlation between the experiments and simulations was backed up by high objective rating scores for all experiments.

Conclusion: The booted lower limb model is accurate in its ability to articulate and transfer loads similar to the physical dummy in simulated underbody loading experiments. The performance of the model leads to the recommendation to use it appropriately as an alternative to costly ATD experiments.     

Zr掺杂TiO_2介孔材料光催化降解头孢氨苄

采用固相合成法制备了Zr掺杂TiO_2(Zr-TiO_2),运用XRD技术对其进行了表征,并将其用于水中头孢氨苄的光催化降解,通过单因素实验及正交实验优化了光催化反应条件。结果表明:制备的Zr-TiO_2为锐钛矿型介孔材料,孔径约为8.12 nm;各因素对头孢氨苄去除率的影响由大到小依次为光照时间、Zr-TiO_2投加量、初始头孢氨苄质量浓度;在Zr-TiO_2投加量为1.5 g/L、初始头孢氨苄质量浓度为10 mg/L、溶液pH为7.0、光照(300 W UV)时间为1.5 h的优化条件下,头孢氨苄去除率高达99.46%;Zr-TiO_2光催化剂的重复使用性能良好。     

农药混配制剂环境风险评估现状与展望

本文综述了欧洲和美国农药混配制剂的环境风险评估方法。详细介绍了欧洲食品安全局(EFSA)评估体系中的2种方法,即,基础的"整体测试法"和近年来提倡的"基于组分的方法"。"基于组分的方法"的特点是以浓度加和模型(CA模型)作为默认假设进行初级评估,以独立作用模型(IA模型)等作为高级评估手段的农药混配制剂环境风险评估方法。此外,本文还介绍了模型偏差率(MDR)、毒性相似度及毒力单元(TU)等概念以及混配制剂风险评估流程。本文的目的旨在为建立我国农药混配制剂的环境风险评估方法体系提供参考。     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

近52a西南地区潜在蒸散发时空变化特征

潜在蒸散发对水资源评价和气候变化均具有重要意义。采用Penman-Monteith公式和气象观测资料计算了中国西南地区90个气象站的潜在蒸散发,并采用多种统计方法分析了潜在蒸散发的时空变化特征。结果表明:(1)西南地区近52a的平均潜在蒸散发为3 209.8 mm,其中云南省潜在蒸散发最高(3 664.7 mm),其次为四川省(3 015.0 mm)、重庆市(2 972.4 mm)、贵州省(2 958.0 mm)。四季潜在蒸散发空间分布特征与年不同,从大到小排序为夏季,春季,秋季,冬季。(2)西南地区整体呈增加趋势(0.9 mm/10 a),其中31个站点呈减少趋势(p0.1),17个站点呈增加趋势(p0.1),其余站点变化趋势不显著。大部分站点春季(55.6%)和夏季(63.3%)呈减少趋势,秋季(62.2%)和冬季(58.9%)则呈增加趋势。(3)经MannKendall突变检验,该区整体潜在蒸散发的突变时间为1995年(p0.05);单个站点突变检验显示,76个站点发生突变,突变年份集中于1980s,未发生突变的站点主要分布于青藏高原东缘。整体上看,近52a来西南地区潜在蒸散发略呈增加趋势,并存在突变点,但部分站点存在相反的变化趋势,这和复杂的地形环境和气候特征有较大关系,体现出西南地区水文气象变化的独特性。     

金融深化对绿色发展的门槛效应分析

在绿色发展的过程中,金融作为现代经济体系中必不可少的一环正扮演着越来越重要的角色。从一般的理论认知和实践而言,可从金融的深化和广化两个角度来看待金融发展。相对金融广化而言,金融深化更能体现金融对于资本的配置功能和金融体系不断完善的过程,它通过引导投资边际收益率促进绿色发展的效率,进而影响整个绿色经济系统的全要素生产率。本文通过构建一个经济内生增长模型来检验金融深化对绿色发展的影响效应,以2003—2014年中国280个地级单元的面板数据为样本,采用面板门槛模型分析其内在作用的非对称性。结果表明:(1)模型推导发现,金融深化作用在不同生产部门所占份额的配置未达到最优时,金融深化对绿色发展存在门槛效应,即金融深化对绿色发展作用存在可能的非对称性;否则,二者以近似对数函数的关系相互作用。(2)实证发现,金融深化对绿色发展在中国地级层面存在一重门槛效应,似然比检验结果表明该门槛效应在1%的临界值下显著,并且其门槛值大小为0.635 5,门限回归结果显示金融深化对绿色发展在门限值前后的偏效应系数分别为-0.056 8和0.129 9,说明中国金融深化与绿色发展的关系呈现库兹涅茨曲线的倒U形形状。(3)稳健性检验发现,控制变量对金融深化导致的绿色发展门槛效应的扰动仅体现在P值的变化范围之内且变化幅度较小,门限值的大小及置信区间不会发生明显变化,反映中国金融深化与绿色发展的关系结构依然稳健。显然,应当大力推进金融深化过程,突破"门槛效应"的制约,充分发挥金融深化对资本的配置效应,从而推动中国绿色发展进程。     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

4段式平板膜处理污泥的中试研究

4段式平板膜处理污泥及中水回用工艺是根据次临界通量的原理设计运行的.在中试装置运行25 d的过程中,发现污泥浓度逐级提升,在进泥浓度为3 g/L左右时,出泥平均可达35 g/L;同时发现,膜出水COD和氨氮浓度均在工艺运行18d内分别保持在50 mg/L和10 mg/L;最后,研究发现,从第1段到第4段过程中,污泥的粒径逐渐减少,而污泥的粘度和毛细脱水时间是逐渐增大的.     

燃煤烟气低温SCR脱硝中试研究

低温选择性催化还原(SCR)脱硝是国内外脱硝技术研发的热点,但目前主要集中在实验室小试范围,无法完全反映催化剂在实际烟气中的运行状况。在30 t/h循环流化床燃煤锅炉脱硫除尘装置后建设了2 000~5 000 m3/h的SCR脱硝中试装置,经系统研究发现,中试使用的蜂窝式催化剂对SO2和NO具有很强的吸附能力,且反应温度、喷氨速率和气体空速均会影响催化脱硝效率。为期5 d的连续运行实验结果表明,催化剂的脱硝效率一直稳定在30%~50%,并未发现明显的失活,这证明设计除雾除尘器、较大的混合器、混合器与反应器间较长的管路均有利于缓解催化剂因SO2、H2O和飞灰中的碱性金属导致的失活。