城市土地利用类型与PM2.5浓度相关性研究——以武汉市为例

随着我国工业化的不断发展,在我国的主要经济发展地区的雾霾天气不断爆发,使我国的大气环境日益恶化,严重影响了人们的日常生活和身体健康。PM2.5作为雾霾的重要组成成分,也日渐成为环境领域的研究热点问题。随着全球性变化研究领域逐渐加强了对土地利用与生态环境的相关研究,因此无论从法律和社会经济发展的角度,还是从生态资源保护与环境可持续发展的角度,土地利用与PM2.5的相关研究都显得相当重要。研究目的:分析武汉市各类用地类型与PM2.5浓度的相关性程度。研究方法:使用ENVI与ArcGIS对武汉市2013年MODIS气溶胶产品进行空间分析与插值处理,再应用SPSS将其与武汉市2013年10个观测点的PM2.5浓度数据作相关性分析,以证实MODIS气溶胶厚度与PM2.5浓度的相关性,并建立两者的线性回归方程,然后利用计算后的武汉市整体PM2.5浓度分布与各土地利用类型进行相关性研究。研究结果:武汉市PM2.5浓度有明显的空间分布特征,绿化面积比例与PM2.5浓度呈显著负相关,建设用地面积比例与PM2.5浓度呈显著正相关,未利用地面积比例虽然与PM2.5浓度呈正相关,但相关性较低,而耕地与水体对PM2.5浓度没有显著影响。研究结论:土地利用类型对武汉市PM2.5浓度的分布有显著的影响,其与搭载MODIS传感器的遥感卫星监测方式的结合能成为研究大范围特定区域PM2.5浓度空间格局的新方法,并且增加城市绿化面积,控制建设用地规模能有效减少PM2.5浓度。     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。     

Influence of sewage culvert cover plate thickness on dynamic response and damage of the cover plate under gas explosion

In order to address the risk of combustible gas explosions in sewage culverts, a numerical model was established using ANSYS/LS-DYNA software. The model consisted of a culvert and a cover plate, and was used to study the effect of cover plate thickness (ranging from 0.08 m to 0.12 m) on the dynamic response and damage of the structure under explosive loads. The results indicated that, during the loading negative pressure stage, the equivalent stress peak value of the central monitoring unit of the cover plate first increased and then decreased with increasing cover plate thickness. Additionally, the maximum principal stress peak value first decreased and then increased, while the maximum shear stress peak value first increased and then decreased. During the loading positive pressure stage, the maximum principal strain peak value of the monitoring unit decreased overall with increasing cover plate thickness. However, the equivalent plastic strain peak value initially increased and then decreased gradually. The equivalent strain indicated that plastic damage occurred in the cover plate. Beyond a thickness of 0.11 m, increasing the cover thickness did not appear to enhance its resistance to plastic damage. The damage analysis revealed that as cover plate thickness increased, the peak displacement and velocity of the monitoring unit continued to decrease, while the overall stability and explosive resistance of the cover plate increased. Additionally, the number of damaged fragments decreased. However, once the cover plate thickness reached 0.11 m, the bonding performance of the reinforced concrete structure had been fully developed, increasing the thickness of the cover plate no longer had a significant impact on the explosive resistance of the cover plate.     

First trimester maternal serum placenta growth factor (PIGF)concentrations in pregnancies with fetal trisomy 21 or trisomy 18

Placenta growth factor (PIGF), an angiogenic factor belonging to the vascular endothelial growth factor family, pregnancy-associated plasma protein A (PAPP-A) and free β-human chorionic gonadotrophin (β-hCG) were measured in maternal serum from 45 pregnancies with trisomy 21, 45 with trisomy 18 and 493 normal controls at 10–13 completed weeks of gestation. In the normal pregnancies maternal serum PIGF levels increased exponentially with gestation. The median multiple of the median (MoM) PIGF concentration in the trisomy 21 group (1.26 MoM) was significantly higher (p<0.0001) than in the control group (1.00 MoM). In the trisomy 18 group the median PIGF was lower (0.889 MoM) but this did not quite reach significance (p=0.064). The corresponding median MoM values for PAPP-A were 1.00 MoM for the controls, 0.49 MoM for trisomy 21 and 0.16 MoM for trisomy 18. The median MoM values for free β-hCG were 1.00 MoM for the controls, 2.05 MoM for trisomy 21 and 0.38 MoM for trisomy 18. In the control group there was a small but significant correlation of PIGF with free β-hCG (r=+0.1024) and PAPP-A (r=+0.2288). In the trisomy 18 group there was a significant association between PIGF and free β-hCG (r=+0.2629) but not with PAPP-A (r=+0.0038). In the trisomy 21 group there was a small but significant association with PAPP-A (r=+0.1028) but not with free β-hCG (r=+0.0339). The separation of affected and unaffected pregnancies in maternal serum PIGF is small, and therefore it is unlikely that measurement of PIGF would improve screening for these abnormalities provided by the combination of fetal nuchal translucency and maternal serum PAPP-A and free β-hCG. Copyright © 2001 John Wiley & Sons, Ltd.     

Confined placental mosaicism for trisomy 14 and maternal uniparental disomy in association with elevated second trimester maternal serum human chorionic gonadotrophin and third trimester fetal growth restriction

A case of confined placental mosaicism (CPM) and maternal uniparental isodisomy 14 identified after placental karyotype revealed trisomy 14 in a newborn with intrauterine growth restriction (IUGR) and minor dysmorphic features is reported. During the second trimester of the pregnancy, multiple marker screening revealed an increased risk for Down syndrome of >1 in 10. The maternal serum human chorionic gonadotrophin (MShCG) was markedly elevated at 4.19 MoM. Amniocentesis revealed a normal 46,XX karyotype. Fetal growth restriction has been associated with elevated MShCG and placental aneuploidy with CPM for chromosomes 2, 7, 9 and 16. The present case of CPM for chromosome 14 was also associated with fetal growth restriction and elevated second trimester MShCG, suggesting a common link. Further studies need to be done to determine if indeed elevation of second trimester MShCG is associated with increased risk of CPM. The present case again demonstrates the need to perform placental karyotype in unexplained fetal growth restriction. Copyright © 2001 John Wiley & Sons, Ltd.     

基于改进灰色模型的管壁蜡沉积厚度预测研究

为对含蜡原油管道中的蜡沉积厚度进行准确预测,在函数cot(x2)变换的基础上,结合平移变换思想,利用cot(x2+c)变换建立新的改进GM(1,1)模型。以现场管道结蜡数据和室内环道结蜡数据为例,对比改进GM(1,1)模型、基于函数cot(x2)变换建立的GM(1,1)模型及传统GM(1,1)模型之间的预测精度,并分析平移量c对改进GM(1,1)模型预测精度的影响。结果表明:改进GM(1,1)模型的预测精度最高,其次是基于函数cot(x2)变换建立的GM(1,1)模型,而传统GM(1,1)模型的预测精度最低;随着平移量的增大,改进GM(1,1)模型的平均相对预测误差呈现出先减小后增大的趋势,因此合理的平移量有助于模型精度的提高。应用改进GM(1,1)模型来预测管道蜡沉积厚度是可行的,该方法可为含蜡原油管道蜡沉积厚度的准确预测提供参考和借鉴。