土壤滤池+等离子除臭技术在污水处理厂的应用

随着区域规划的调整,苏州某污水处理厂周围环境变得较为敏感,原有除臭设施已无法满足新的环保要求,该污水处理厂的除臭工程需要进行升级改造.经综合比选后确定采用在现有除臭设施基础上增设土壤滤池+等离子除臭设施的方案.除臭工程实施后,主要臭气源得到有效控制,氨、硫化氢和二硫化碳等恶臭物质去除率均在85％以上,甚至达到99％,除臭设施处理效果良好,厂界处污染物排放满足GB 14554-93《恶臭污染物排放标准》一级标准要求.     

湘潭锰矿重金属环境安全及植物耐性研究

采集了湘潭锰矿红旗分矿开采区、沙圹村恢复区的代表性当季蔬菜(莴笋叶Fruticicolidae、小白菜Brassica chinensis、香葱Allium schoenoprasum、空心菜Ipomoea aquatica)、废弃区的优势植物(商陆Phytolacca acinosa、野茼蒿Crassocephalum crepidioides、苍耳Xanthium sibiricum)和3个研究区的土壤,通过原子吸收分光光度法分析了Mn、Pb、Zn含量。结果表明:开采区蔬菜Mn含量(8.3~84.5 mg/kg)明显高于恢复区(2.7~55.6 mg/kg),开采区和恢复区蔬菜都明显受到Pb污染(0.6~33mg/kg),蔬菜Zn含量范围为1.9~6.5mg/kg;3个研究区域土壤重金属均明显超标,最严重的是Pb污染(1 993.5~2 213.5mg/kg)。商陆、野茼蒿和苍耳中重金属含量差异较大,对重金属的耐性强,其中商陆表现出最好的耐性与长势。研究结论对锰矿土地合理利用以及矿区土壤重金属治理提供一定的科学依据。     

集合经验模态分解在长江中下游梅雨变化多尺度分析中的应用

基于长江中下游流域5个梅雨监测站1961~2012年的日数据,利用集合经验模态分解（EEMD）方法,对研究期内梅雨时间序列进行多尺度的分析,探讨其在不同时间尺度上的振荡模态结构特征。结果表明：近50多年来,长江中下游梅雨变化呈现出显著的年际和年代际尺度振荡特征,在年际尺度上表现出准3 a和6 a的周期变化,而在年代际尺度上显示准13 a和24 a的周期变化;各分量方差〖JP2〗贡献率显示,年际振荡在梅雨长期变化中占据主导地位;自1961年以来,EEMD分解的梅雨长期变化趋势表现出先增加后减少的倒“U”型特征,其中1961~1985年呈上升趋势,1985~2012年呈下降趋势,尤其是在2000年之后的下降趋势最为明显。由此可以看出,EEMD能够有效地揭示梅雨长期序列在不同时间尺度上的变化规律,可用于诊断非线性、非平稳性信号变化的复杂性特征     

岷江上游水电开发特点及其空间格局分析

研究流域的水电开发类型与空间格局,可为水库群的累积环境影响评价、流域水电优化布局等提供科学参考。在流域分割的基础上,对岷江上游水电站的基本类型、水电站的空间分布格局进行了全面分析,并构建水电开发率、水电开发密度和水电开发强度3个指标对流域水电开发程度作出综合评价。结果表明岷江上游流域水电站类型以高水头低闸坝的引水式小水电为主,高坝大库相对较少。梯级水电开发已拓展至岷江三级支流,汶川—都江堰河段是干流水电开发程度最高的河段,杂谷脑河是水电开发程度最高的一级支流流域。岷江上游流域的水电开发率远高于全国平均水平,梯级水电开发密度大于国内主要河流。农村小水电占水电站总数的82%,梯级农村小水电对生态环境的累积影响是将来值得深入探讨的问题。     

Effects of typical additives on the thermal stability of ammonium peroxydisulfate

Ammonium peroxydisulfate (APS), one of the most widely used inorganic peroxides in the process industries, is a thermally unstable peroxide and potent oxidizer due to the presence of peroxy bond in the molecule and is incompatible with most substances. To investigate the effect of typical additives on the thermal decomposition of APS, in this paper, diamine phosphate (DAP), monoamine phosphate (MAP), and aluminum hydroxide (AH) were selected as additives; pure APS and samples with 10 wt% and 20 wt% of additives were first tested by differential scanning calorimetry (DSC). The experiments and analysis showed that the samples with 10 wt% of additive had better thermal stability than those with 20 wt% of additive. After screening, the three groups of 10 wt% AH, 10 wt% MAP, and 20 wt% MAP additive conditions could be considered to have a better thermal stability effect on the thermal decomposition of APS. Four groups of samples were, in turn, tested by Phi-Tec II. The adiabatic results showed two discontinuous exothermic processes; 10 wt% AH promoted the weak exothermic effect in the first stage. In contrast, the three groups of additives in the main exothermic stage showed different degrees of inhibition, and the inhibiting effect was ranked as 10 wt% AH, 10 wt% MAP, and 20 wt% MAP in order. Finally, the self-accelerated decomposition temperature (SADT) was calculated under the 25 kg standard package. The adiabatic results, including SADT, were combined to render feasible recommendations for the use of additives, which provides references for the packaging and transportation of additives and their applications.     

Alien plant invasions--incorporating emerging invaders in regional prioritization: a pragmatic approach for Southern Africa

Plant invasions are a serious threat to natural and semi-natural ecosystems worldwide. Most management-orientated research on invasions focuses on invaders that are already widespread and often have major impacts. This paper deals with "emerging" invaders-those alien species with the potential to become important problems without timely intervention. A climate matching procedure was developed to define areas of South Africa, Lesotho and Swaziland that could be invaded by 28 plant species that had previously been classified as emerging invaders. Information on the location of populations of these species in the study area was combined with information on their distributions (as native or alien) in parts of Australia and the United States of America. These two countries had the best available distribution data for this study. They also share many invasive alien plant species with South Africa. Climatic data obtained for weather stations near points of known occurrence in these countries were used to define the climatically suitable areas for each species in the study area. Almost 80% of the remaining natural environment in southern Africa was found to be vulnerable to invasion by at least one of these species, 50% by six or more and 24% by 16 or more species. The most vulnerable areas are the highveld grasslands and the eastern escarpment. The emerging invaders with the greatest potential range included Acacia podalyriifolia and Cortaderia selloana. The globally important invaders Ulex europaeus and Lythrum salicaria had a more limited invasion potential but could still become major invaders. There was no relationship between the extent of the climatically suitable areas for the different species and an expert ranking of their invasion potential, emphasising the uncertainties inherent in making expert assessments based on very little information. The methods used in this analysis establish a protocol for future modelling exercises to assess the invasion potential of other emerging invaders.     

福建省生产废水和生活污水污染物排放的驱动力及其时空分异

采用对数平均迪氏指数方法,区分生产和生活两个体系,构建时空分解分析模型,追踪了福建省9个设区市2011—2019年水污染物排放变化的关键驱动力及其贡献的时空差异.结果显示：研究期内福建省工业废水污染物排放持续减少,并且各驱动力贡献的区域差距明显变小,趋于平衡;生活污水污染物排放量仍保持高位,各驱动力贡献的区域差距基本保持不变.其中,经济规模扩张是福建省水污染物排放的主导驱动力,主要源于福州、厦门、泉州经济赶超发展影响;城镇化发展对区域生活污水污染物排放的驱动影响表现为增排效应,以福州和厦门尤为显著;工业化发展对区域工业废水污染物排放的影响效应由正驱动逐渐转变为负驱动,这主要归功于三明和泉州产业结构调整优化的拉动 效应;技术效应一直是福建省水污染物排放控制的重要驱动力,但部分地区已逐渐步入生活污染物技术减排攻坚期.     

长江三角洲创新发展空间溢出效应的测度与分解

一体化深化背景下,准确把握城市群创新互动关系,对于推动高质量发展具有重要现实意义。空间溢出是创新发展互动关系重要体现之一,基于城市尺度数据、空间计量方法,对长江三角洲创新发展空间溢出效应进行多角度研究。主要结论如下：（1）城市创新发展存在显著为正的空间溢出效应,创新人才、资金投入、经济发展、交通设施和对外开放等都是创新发展重要驱动因素,但不同因素空间溢出效应存在差异。（2）不同区域、不同时期对比发现,创新发展空间溢出效应存在显著差异,如区域对比核心区时间演变明显增强等。（3）空间溢出效应随距离增加呈现“倒U型”演变趋势,且这一效应在325 km处最大,而后空间溢出效应的缓慢波动下降与中心城市相对均衡分布有关。本文为识别城市创新发展互动关系提供了新视角,对推动城市群创新发展、一体化深化等具有现实指导意义。     

河北省某大型焦化厂地下水中多环芳烃的污染特点、源解析及生态风险评价

为研究焦化厂地下水中美国EPA优先控制的16种多环芳烃(PAHs)的分布特点和污染来源,本研究联合使用统计技术、正定矩阵因子分析(PMF)模型和风险商值法,深入分析了焦化厂地下水中PAHs的分布规律,定量解析了PAHs的污染来源,并且对其生态风险进行了科学评价.结果表明,焦化厂地下水中16种PAHs的总检出率较高,达到46.7%.地下水中∑₁₆PAHs的浓度范围是n.d.～444.9μg·L^-1,均值为1.88μg·L^-1.不同生产车间地下水中PAHs的浓度存在明显差异,其中污染最重的车间位于焦油精制区,地下水中∑₁₆PAHs的浓度为444.92μg·L^-1.应用PMF源解析模型,识别出该焦化厂地下水中PAHs有二类污染源：一是石油的燃烧源,二是煤和生物质燃烧以及石油类的泄漏,二种污染源对焦化厂地下水中PAHs的贡献率分别为38.6%和61.4%.焦化厂地下水中∑₁₆PAHs处在高生态风险等级,且有53.4%的地下水采样点单体PAHs的生态风险处在高风险等...