Vegetation of the Northern Russian Far East in geographic information systems

The cartographic method, in combination with computer technologies and special software, was used to develop a series of projects of geographic information systems (GISs), including regional GISs (RGISs) for three administrative regions (Magadan oblast, Chukchi Autonomous Area, and Koryak Autonomous Area) and the territorial GIS Vegetation of the Northern Russian Far East.     

Industrial experience of process identification and set-point decision algorithm in a full-scale treatment plant

This paper presents industrial experience of process identification, monitoring, and control in a full-scale wastewater treatment plant. The objectives of this study were (1) to apply and compare different process-identification methods of proportional-integral-derivative (PID) autotuning for stable dissolved oxygen (DO) control, (2) to implement a process monitoring method that estimates the respiration rate simultaneously during the process-identification step, and (3) to propose a simple set-point decision algorithm for determining the appropriate set point of the DO controller for optimal operation of the aeration basin. The proposed method was evaluated in the industrial wastewater treatment facility of an iron- and steel-making plant. Among the process-identification methods, the control signal of the controller's set-point change was best for identifying low-frequency information and enhancing the robustness to low-frequency disturbances. Combined automatic control and set-point decision method reduced the total electricity consumption by 5% and the electricity cost by 15% compared to the fixed gain PID controller, when considering only the surface aerators. Moreover, as a result of improved control performance, the fluctuation of effluent quality decreased and overall effluent water quality was better.     

Contribution of Wastewater Treatment Plant Effluents to Nutrient Dynamics in Aquatic Systems: A Review

Excessive nutrient loading (considering nitrogen and phosphorus) is a major ongoing threat to water quality and here we review the impact of nutrient discharges from wastewater treatment plants (WWTPs) to United States (U.S.) freshwater systems. While urban and agricultural land uses are significant nonpoint nutrient contributors, effluent from point sources such as WWTPs can overwhelm receiving waters, effectively dominating hydrological characteristics and regulating instream nutrient processes. Population growth, increased wastewater volumes, and sustainability of critical water resources have all been key factors influencing the extent of wastewater treatment. Reducing nutrient concentrations in wastewater is an important aspect of water quality management because excessive nutrient concentrations often prevent water bodies from meeting designated uses. WWTPs employ numerous physical, chemical, and biological methods to improve effluent water quality but nutrient removal requires advanced treatment and infrastructure that may be economically prohibitive. Therefore, effluent nutrient concentrations vary depending on the particular processes used to treat influent wastewater. Increasingly stringent regulations regarding nutrient concentrations in discharged effluent, along with greater freshwater demand in populous areas, have led to the development of extensive water recycling programs within many U.S. regions. Reuse programs provide an opportunity to reduce or eliminate direct nutrient discharges to receiving waters while allowing for the beneficial use of reclaimed water. However, nutrients in reclaimed water can still be a concern for reuse applications, such as agricultural and landscape irrigation.     

二氧化氯杀菌处理石化循环冷却水

以硫酸盐还原菌,铁细菌以及异养菌数为指标,研究二氧化氯对石化厂循环冷却水的杀菌效果。考察了二氧化氯投加量,杀菌时间,温度及pH以及余氯量随时间的变化。结果表明,在CLO2投加量为3mg／L、灭菌时间为90min时,出水细菌数即可达到化工行业循环冷却水处理标准,并且余氯可在0．5-1．0mg／L范围内维持2h。温度和pH的改变对杀菌效果影响不大。     

硝酸异辛酯热安定性的实验研究

使用加速量热仪(ARC)研究硝酸异辛酯(EHN)的热分解,得到热分解温度随时间的变化曲线,自放热速率、分解压力随温度的变化曲线以及分解压力随升温速率的变化曲线。分析在绝热条件下硝酸异辛酯的热分解反应动力学和热分解过程,计算表观活化能、指前因子和反应热等参数。根据绝热热分解的起始温度和反应热数据,给出硝酸异辛酯在反应危险度等级中的分类,并计算在75℃时的反应风险指数。     

Thallium in the Environment and Health Effects

Thallium is present in the natural environment in low concentration, being found most frequently in the sulphide ores of a number of heavy metals. Atmospheric emission and deposition from industrial sources has resulted in raised levels in the vicinity of mineral smelters, coal burning power plants, brick works and cement plants. In contaminated areas, raised levels are found in vegetables, fruit and in farm animals. Thallium is used industrially in small quantities, with uses in electronics, in the production of certain glasses and crystals and in medical diagnostics. It has in the past been commonly used as a rodenticide, but its use has now been banned in many countries. Thallium salts are now considered to be amongst the most toxic compounds known. With regard to population exposure, an epidemiological study in an area with high thallium concentrations in soil and garden vegetables centred on a cement plant, has found evidence of a dose response relationship between thallium concentration in urine and a number of non-specific subjective symptoms. Much further research is required to investigate the possible adverse health effects of thallium following population exposure.     

The Use of Atmospheric Dispersion Models in Risk Assessment Decision Support Systems for Pesticides

In the evaluation of potentially adverse effects oforganic chemicals such as pesticides on theenvironment the atmosphere may play an important role.After its release to the atmosphere the chemical willbe transported/dispersed in the atmosphere and finallyit will be removed either by atmospheric-chemicaldestruction or by deposition to the underlying soil orsurface water. In a risk assessment decision supportsystem both ambient concentrations and depositionfluxes must be known to evaluate the risk of directexposure (inhalation) or the risk of soil and watercontamination caused by deposition. This paperdiscusses the use of atmospheric dispersion models insuch risk assessment decision support systems.     

火电厂对生态环境影响的总体评价

抛弃了以往在分析污染排放物对环境影响时只对不同污染物进行单独分析的做法,从单位污染物对大气的影响和生产单位有用能的污染物排放量两方面考虑,建立了一个通用的、能综合评价各种污染物对环境总体影响的模型--能源生态效率模型,并对燃烧不同燃料火电厂的能源生态效率作了计算,对能源生态效率的影响因素进行了分析.     

Critical analysis of the waste management performance of two uranium production units in Brazil--part II: Caetite production center

This paper discusses the environmental waste management of the Heap-Leach Uranium Production Facility of Caetité located in a semi-arid region in Brazil. A comparison is made with the first uranium production site of the country located in Poços de Caldas. It is demonstrated that differences in the operational process along with different environmental conditions can lead to different impacts. In the present case groundwater is the potential most sensitive environmental medium despite the well-established consensus in the literature that radon and aerosol emissions may turn-out to be the most relevant environmental aspects of an installation located at this type of region. Most of the ²²⁶Ra content in the ore remains in the leached ore that is deposited with the waste rock. A lack in appropriate prediction of the hydrological balance has been causing unanticipated emissions of liquid effluents into the environment. Chemical treatment of this effluent may be needed. Contamination of groundwater in the short term by the waste ponds is not to be expected but it can be a relevant issue in the long term. As a consequence, careful closure schemes will need to be put in place. Finally, the overall costs with remediation in the Caetité production center are lower than those observed at the Poços de Caldas mining site.     

Detecting deforestation with a spectral change detection approach using multitemporal Landsat data: a case study of Kinabalu Park, Sabah, Malaysia

Tropical deforestation is occurring at an alarming rate, threatening the ecological integrity of protected areas. This makes it vital to regularly assess protected areas to confirm the efficacy of measures that protect that area from clearing. Satellite remote sensing offers a systematic and objective means for detecting and monitoring deforestation. This paper examines a spectral change approach to detect deforestation using pattern decomposition (PD) coefficients from multitemporal Landsat data. Our results show that the PD coefficients for soil and vegetation can be used to detect deforestation using change vector analysis (CVA). CVA analysis demonstrates that deforestation in the Kinabalu area, Sabah, Malaysia has significantly slowed from 1.2% in period 1 (1973 and 1991) to 0.1% in period 2 (1991 and 1996). A comparison of deforestation both inside and outside Kinabalu Park has highlighted the effectiveness of the park in protecting the tropical forest against clearing. However, the park is still facing pressure from the area immediately surrounding the park (the 1km buffer zone) where the deforestation rate has remained unchanged.