采油厂化验室危险因素及对策

针对采油厂化验室的特点,对其存在的危险有害因素,从火灾爆炸、中毒、腐蚀、触电、机械伤害、人员、储存场所等方面进行了较为系统的分析,并提出了相应的对策措施。     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

耦合式SCR还原剂供给调节装置及控制技术的研究与应用

阐述了SCR喷氨调节控制常用的方法及存在的问题,提出了一种新型耦合式SCR还原剂供给调节装置及控制技术,并通过电厂实际案例对该调节装置与控制技术进行了说明。研究结果表明:该调节装置及控制技术可使脱硝效率相对稳定、出口NO_x的浓度不超标、喷氨不过量。     

生物接触氧化+植物一体化装置处理小城镇污水试验研究

利用“生物接触氧化+植物”一体化装置处理城镇污水,试验最终选用悬浮多面球作填料,采用射流曝气,控制进水流量为0.45 m3/h,进水浓度为COD 63～467 mg/L、NH3-N 11.21～52.7 mg/L、TN 28.6 ～63.5mg/L和TP １.1～6.42 mg/L时,COD、NH3-N、TN和TP的去除率分别达到88％、86％、70％、60％以上,出水COD≤30 mg/L,NH3-N≤5 mg/L、TN≤13 mg/L、TP≤0.5 mg/L.水质优于《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准,具有较好的工程应用前景.     

Occurrence, distribution, and potential influencing factors of sewage sludge components derived from nine full-scale wastewater treatment plants of Beijing, China

Millions of tons of waste activated sludge (WAS) produced from biological wastewater treatment processes cause severe adverse environmental consequences. A better understanding of WAS composition is thus very critical for sustainable sludge management. In this work, the occurrence and distribution of several fundamental sludge constituents were explored in WAS samples from nine full-scale wastewater treatment plants (WWTPs) of Beijing, China. Among all the components investigated, active heterotrophic biomass was dominant in the samples (up to 9478 mg/L), followed by endogenous residues (6736 mg/L), extracellular polymeric substances (2088 mg/L), and intracellular storage products (464 mg/L) among others. Moreover, significant differences (p < 0.05) were observed in composition profiles of sludge samples among the studied WWTPs. To identify the potential parameters affecting the variable fractions of sludge components, wastewater source as well as design and operational parameters of WWTPs were studied using statistical methods. The findings indicated that the component fraction of sewage sludge depends more on wastewater treatment alternatives than on wastewater characteristics among other parameters. A principal component analysis was conducted, which further indicated that there was a greater proportion of residual inert biomass in the sludge produced by the combined system of the conventional anaerobic/anoxic/oxic process and a membrane bioreactor. Additionally, a much longer solids retention time was also found to influence the sludge composition and induce an increase in both endogenous inert residues and extracellular polymeric substances in the sludge.     

设计配置对生物滞留设施污染物去除性能的影响研究

生物滞留是一种常用的低影响开发技术,通过不同机理去除径流中的各种污染物。设施面积、消能池设置、表面覆盖物的合理设计可降低外界的不利影响;内部斜坡与多元结构可优化设施性能,介质层的改良填料和较长深度可提高污染物的去除效率;配置适宜植物可提高环境耐受能力与污染物去除效果,引入多样植物可提高设施生物多样性,有利于发挥动植物相互作用,提高设施的稳定性与整体性能。     

植物微体遗存分析在第四纪环境研究中的应用:综述与展望

以孢粉、植硅体等为代表的植物微体遗存由于其分布广泛,容易保存,可反映母体植物类型的优点,在第四纪环境研究中得到了广泛应用。本文介绍了植物微体遗存的概念、常见类型,以及它们的提取方法和原理,综述了利用植物微体遗存重建古环境的传统方法和近年来发展的几种古植被与古气候定量重建方法,最后简述了植物微体遗存在年代测定、稳定同位素分析研究上的应用进展与实例。文末指出了现有研究方法的问题与不足,并对今后的多代用指标的综合研究提出了展望。     

基于LCA的污水处理厂提标改造环境影响负荷研究

研究旨在评价污水处理厂提标改造工程前后的环境影响,并做出科学的管理决策。以呼和浩特市公主府污水处理厂为例,采用生命周期评价(LCA)的方法,定量研究了污水处理厂改造前后的环境影响负荷,识别和判断出环境影响负荷的变化量。结果表明:该污水处理厂经过改造之后的环境负荷大于改造之前,相比改造前增长约63.5%,其中水质和水体富营养化影响潜能明显减小,而不可再生资源消耗、全球变暖影响潜能的增加量较大,环境负荷增加的根本原因在于电耗的增加。最后根据评价结果提出针对污水处理厂提标改造工程的改善建议。     

双提升管催化裂化装置隔离汽油沉降器后的风险分析及对策

分析了双提升管催化裂化装置隔离汽油沉降器的方法及隔离后存在的风险,根据分析结果提出相应对策。     

日本“3·11”大地震对石化行业的启示

简要分析了日本“3·11”大地震后发生的2起炼油厂火灾事故,对日本在地震中的一些经验教训进行了总结,根据本次及近几年地震对石化企业的破坏情况,分析了地震中石化装置的薄弱环节,并提出对石化行业的启示。