火电厂清洁生产的可持续性分析与评估

从企业生态角度分析了火电厂清洁生产的可持续性;运用能值理论对火电厂清洁生产的可持续性进行了评估;以某发电厂采用清洁生产为实例进行了可持续性分析,结果表明:火电厂清洁生产的可持续性明显提高。     

磷酸铵镁法处理焦化厂高浓度氨氮废水

介绍了酸铵镁(magnesiumammoniumphosphate,MAP)法处理高浓度氨氮废水的技术,研究了药剂配比、反应pH值以及药剂选择等因素对氨氮去除率的影响。试验结果表明,当在剩余氨水中投加MgCl2·6H2O和Na2HPO4·12H2O药剂,Mg2+∶NH+4∶PO3-4的摩尔比为1.4∶1∶0.9,反应pH值为8.5~9.5的条件下,原水的氨氮浓度可由2000mg/L降到15mg/L。并通过对反应沉淀物的结构成分分析,探讨了MAP作为有效缓释肥开发利用的可行性。     

Googling Trends in Conservation Biology

Web‐crawling approaches, that is, automated programs data mining the internet to obtain information about a particular process, have recently been proposed for monitoring early signs of ecosystem degradation or for establishing crop calendars. However, lack of a clear conceptual and methodological framework has prevented the development of such approaches within the field of conservation biology. Our objective was to illustrate how Google Trends, a freely accessible web‐crawling engine, can be used to track changes in timing of biological processes, spatial distribution of invasive species, and level of public awareness about key conservation issues. Google Trends returns the number of internet searches that were made for a keyword in a given region of the world over a defined period. Using data retrieved online for 13 countries, we exemplify how Google Trends can be used to study the timing of biological processes, such as the seasonal recurrence of pollen release or mosquito outbreaks across a latitudinal gradient. We mapped the spatial extent of results from Google Trends for 5 invasive species in the United States and found geographic patterns in invasions that are consistent with their coarse‐grained distribution at state levels. From 2004 through 2012, Google Trends showed that the level of public interest and awareness about conservation issues related to ecosystem services, biodiversity, and climate change increased, decreased, and followed both trends, respectively. Finally, to further the development of research approaches at the interface of conservation biology, collective knowledge, and environmental management, we developed an algorithm that allows the rapid retrieval of Google Trends data.     

Resolving whether botanic gardens are on the road to conservation or a pathway for plant invasions

A global conservation goal is to understand the pathways through which invasive species are introduced into new regions. Botanic gardens are a pathway for the introduction of invasive non‐native plants, but a quantitative assessment of the risks they pose has not been performed. I analyzed data on the living collections of over 3000 botanic gardens worldwide to quantify the temporal trend in the representation of non‐native species; the relative composition of threatened, ornamental, or invasive non‐native plant species; and the frequency with which botanic gardens implement procedures to address invasive species. While almost all of the world's worst invasive non‐native plants occurred in one or more living collections (99%), less than one‐quarter of red‐listed threatened species were cultivated (23%). Even when cultivated, individual threatened species occurred in few living collections (7.3), while non‐native species were on average grown in 6 times as many botanic gardens (44.3). As a result, a botanic garden could, on average, cultivate four times as many invasive non‐native species (20) as red‐listed threatened species (5). Although the risk posed by a single living collection is small, the probability of invasion increases with the number of botanic gardens within a region. Thus, while both the size of living collections and the proportion of non‐native species cultivated have declined during the 20th century, this reduction in risk is offset by the 10‐fold increase in the number of botanic gardens established worldwide. Unfortunately, botanic gardens rarely implement regional codes of conduct to prevent plant invasions, few have an invasive species policy, and there is limited monitoring of garden escapes. This lack of preparedness is of particular concern given the rapid increase in living collections worldwide since 1950, particularly in South America and Asia, and highlights past patterns of introduction will be a poor guide to determining future invasion risks.     

Predicting Extinction Risk of Brazilian Atlantic Forest Angiosperms

Understanding how plant life history affects species vulnerability to anthropogenic disturbances and environmental change is a major ecological challenge. We examined how vegetation type, growth form, and geographic range size relate to extinction risk throughout the Brazilian Atlantic Forest domain. We used a database containing species‐level information of 6,929 angiosperms within 112 families and a molecular‐based working phylogeny. We used decision trees, standard regression, and phylogenetic regression to explore the relationships between species attributes and extinction risk. We found a significant phylogenetic signal in extinction risk. Vegetation type, growth form, and geographic range size were related to species extinction risk, but the effect of growth form was not evident after phylogeny was controlled for. Species restricted to either rocky outcrops or scrub vegetation on sandy coastal plains exhibited the highest extinction risk among vegetation types, a finding that supports the hypothesis that species adapted to resource‐limited environments are more vulnerable to extinction. Among growth forms, epiphytes were associated with the highest extinction risk in non‐phylogenetic regression models, followed by trees, whereas shrubs and climbers were associated with lower extinction risk. However, the higher extinction risk of epiphytes was not significant after correcting for phylogenetic relatedness. Our findings provide new indicators of extinction risk and insights into the mechanisms governing plant vulnerability to extinction in a highly diverse flora where human disturbances are both frequent and widespread. Predicción del Riesgo de Extinción de Angiospermas del Bosque Atlántico Brasileño     

Process analysis of an industrial waste-to-energy plant: Theory and experiments

Thermal conversion is fundamental in an integrated waste management system due to the capability of reducing mass and volume of waste and recovering energy content from unrecyclable materials. Indeed, power generation from industrial solid wastes (ISW) is a topic of great interest for its appeal in the field of renewable energy production as well as for an increasing public concern related to its emissions. This paper is based on the process engineering and optimization analysis, commissioned to the University Campus-Biomedico of Rome by the MIDA Tecnologie Ambientali S.r.l. enterprise, ended up in the construction of an ISW thermo-conversion plant in Crotone (Southern Italy), where it is nowadays operating. The scientific approach to the process analysis is founded on a novel cascade numerical simulation of each plant section and it has been used initially in the process design step and after to simulate the performances of the industrial plant. In this paper, the plant process scheme is described together with the values of main operating parameters monitored during the experimental test runs. The thermodynamic and kinetic basics of the mathematical model for the simulation of the energy recovery and flue gas treatment sections are presented. Moreover, the simulation results, together with the implemented parameters, are given and compared to the experimental data for 10 specific plant test runs. It was found that the model is capable to predict the process performances in the energy production as well as in the gas treatment sections with high accuracy by knowing a set of measurable input variables. In the paper fundamental plant variables have been considered such as steam temperature, steam flow rate, power generated as well as temperature, flow rate and composition of the resulting flue gas; therefore, the mathematical model can be simply implemented as a reliable and efficient tool for management optimization of this kind of plants.     

广东省药物活性化合物的污染特征及生态风险评价

随着药物活性化合物(PhACs)的大量生产和使用,PhACs已成为环境中的一类新污染物.为了调查PhACs在广东省的污染特征,采集了全广东省21个城市,包括178个乡镇及行政区,共186个污水厂的原始污水.采用全自动固相萃取仪和高效液相色谱-三重四级杆质谱联用仪,分析了污水厂进水中10种典型PhACs的污染水平,全面揭示了PhACs在广东省的空间分布特征,并对PhACs的潜在生态风险进行评价.调查结果表明,全部污水厂均有PhACs检出,各污水厂进水中∑PhACs质量浓度范围为21.00～9 558.25 ng·L^-1,其中美托洛尔、对乙酰氨基酚、苯扎贝特和咖啡因是广东省污水厂进水中的主要污染物.在空间分布上,广东省各区域∑PhACs质量浓度平均值呈现出珠三角>粤北>粤东≈粤西的分布特征.根据污水厂的处理工艺,对∑PhACs质量浓度超过2 500 ng·L^-1的污水厂的出水质量浓度进行估算,并根据估算的出水进行PhACs的生态风险评价.结果表明,广东省PhACs的生态风险较低,苯扎贝特在韶关、江门和深圳呈现出中风险,∑PhACs生态...     

Effect of acid solutions on plants studied by the optical beam deflection method

The optical beam deflection method was applied to study the effects of acid solution on both a terrestial and aquatic plants Egeria and Cerastium, which are common aquatic plant and terrestial weed respectively. A probe beam from a He-Ne laser was passed through a vicinity of a leaf of the plants, which were put in culture dishes filled with acid solutions. Deflection signals of the probe beam were monitored and compared for acid solutions with different pH values. The results of Egria showed that the deflection signals changed dramatically when pH values of acid solutions were 2.0 and 3.0, while little at pH of 4.0 and 5.0. For Cerastium when pH were below 3.0, deflection signals changed greatly with time at the begining. After a certain period of time, deflection signals changed little with time. When pH value was above 4.0, deflection signals of Cerastium were still changing with time even after 20 hours. The results suggested that the damage threshold of pH was between 3.0 and 4.0 for both the land and aquatic plants.     

Screening of endophytic bacteria against fungal plant pathogens

Bacterial endophytes were found from 6 plant leaves among 35 plant leaves screened. Two of the isolated bacteria showed antagonistic activity against fungal plant pathogens. An isolate named KL1 showed the clear inihibition against plant pathogens, Fusarium oxysporum and Rhizoctonia solani, on PDA as well as TSA plate. Supernatant of the bacterial culture also showed the clear inhibition against the fungal growth on the plate and the antibiotic substance was identified as iturin A by HPLC analysis. KL1 was identified as Bacillus sp. from the 16S rRNA gene analysis. Very thin hyphae of R. solani was miccroscopically observed when the fungus was co-cultivated with KL1.     

Combined effects of cadmium and fluoranthene on germination, growth and photosynthesis of soybean seedlings

The single and combinational effects of cadmium (Cd) and fluoranthene (FLT) on germination, growth and photosynthesis of soybean seedlings were investigated. Exposure to 5, 10, or 15 mg Cd/L or 1, 5, or 10 mg FLT/L individually or in combination significantly decreased germination vigor (3 days) and final germination rate of soybean seeds, except at 1 and 5 mg FLT/L. The results of two-way ANOVA analysis and the Bliss independence model showed that at lower concentrations of FLT (1 mg/L), the interaction between Cd and FLT on germination was antagonistic, whereas the interaction was synergistic when the concentration of FLT was 5 or 10 mg/L and the concentration of Cd was 15 mg/L. Growth, expressed as dry weight, length of shoot and root, leaf area, and photosynthesis, expressed as net photosynthetic rate, intercellular CO2 concentration, chlorophyll contents and fluorescence of soybean seedlings were also reduced by exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L, singly or jointly. Significant antagonistic effects of exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L on shoot growth and photosynthesis were observed, whereas synergy and antagonism of Cd and FLT were both observed for root growth.