中国低碳城市试点的政策设计逻辑

政策试点是中国国家治理策略体系的重要组成部分,是中国政府遵循“由点到面”逻辑以试验手段制定政策的一种常规性工作方法。低碳城市试点是中国应对气候变化战略的重要组成部分,通过选择不同类型、不同发展阶段、不同资源禀赋的地区开展试点,探索经济增长与碳排放脱钩的模式。现有文献侧重低碳城市建设的内涵、建设模式与路径、温室气体的核算方法、政策手段、峰值研究与达峰路径、效果评估等,有力地支持了低碳城市建设决策,但对于低碳城市试点的政策设计鲜有涉及。本文从政策过程理论、央地关系两个视角,结合府际学习与竞争关系,建构了中国低碳城市政策“试点–扩散”机制与政府行为的分析框架。中国的低碳城市试点具有探索型开拓性、综合型专业性、授权型自主性的特点,结合三批低碳城市试点的文件要求和实践进展,从政策试点的选点、设计、执行、监督和评估五个方面对于中国低碳城市试点进行了系统的梳理分析。相较于经济领域的其他政策试点,低碳城市政策试点具有弱激励弱约束的政策环境。地方政府基于自身的学习能力和领导力,在政策创新方面表现出争先、自主、效仿和守成四种行为特征,并以杭州、深圳、镇江、成都四个表率城市做了实证。政策“试点-扩散”的过程从本质上讲是中国政策创新与扩散的过程,可能在现实中需要往复多次进行,中国已陆续开展的三批低碳城市试点工作就遵循这样的政策逻辑。试点的意义是试出问题、解决问题、积累经验。从前三批试点城市评估结果来看,试点城市在低碳发展目标设定、转型路径探索和低碳发展动力转换等方面与社会的预期仍有差距,为此本文提出了推进低碳城市建设的四点建议:一是激发城市低碳发展的内生动力;二是完善低碳城市试点的科学论证机制;三是建立激励与约束并举的长效机制;四是强化市场公平竞争的政策导向。     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

等离子体脱硫运行参数分析

利用介质阻挡强电离放电产生非平衡等离子体,进行模拟烟气脱硫。通过一次回归正交设计,对影响非平衡等离子体脱硫效率的因素进行了分析,建立了多元线性回归模型,分析了因子的主次,并得到了实验指标和各因子之间的定量规律。通过对模型的优化,获得了使脱硫率较高的各因素的最优组合。     

Psychological Reactance From Reading Basic Facts on Climate Change: The Role of Prior Views and Political Identification

Scholars continue to search for solutions to shift climate change skeptics’ views on climate science and policy. However, research has shown that certain audiences are resistant to change regarding environmental issues. To explore this issue further, we examine the presence of reactance among different audiences in response to simple, yet prominently used, climate change messages. Our results show that emphasizing the scientific consensus of climate change produces reactance, but only among people who question the existence of climate change. Moreover, adding political identification to the model as an additional moderating variable shows the increases in reactance occur among Republicans who question the existence of climate change. Finally, our results show that reactance to climate change messaging may lead to backfiring effects on important outcomes tied to climate change such as risk perceptions, climate change beliefs, and support for mitigation policies.     

响应面法优化酸性玫瑰红B光催化氧化的影响参数

利用中心组合设计和响应面分析方法对影响UV/TiO2光催化降解酸性玫瑰红B的主要因素(初始pH值、K2S2O8浓度、TiO2浓度)进行分析.其中初始pH值、K2S2O8浓度和TiO2浓度的高、低水平分别为4-5.6,26-36mg·l-1和0.53-1.87mg·l-1,分析参数为脱色率的变化.通过使用Design-Expert 5软件可得到1个2次响应曲面模型,最佳的初始pH值、K2S2O8浓度和TiO2浓度分别为4.69,29.73mg·l-1和1.18 mg·l-1,脱色率达到最大(94.21%).     

中国地质调查局安全生产管理平台方案探讨

安全生产管理平台是中国地质调查局为应对日益严峻的地质调查安全生产形势,加强地质调查安全生产监管而开发的一套软件系统,涵盖了安全管理工作的大多数内容,并具有信息处理、数据记录、文档管理、统计查询等功能。文章从系统目标、系统设计、主要功能模块等几方面分析了安全生产管理平台设计方案。建议加快安全生产管理平台研发速度,提高我国地质调查安全生产管理水平。     

黄河上游玛曲生态系统服务价值的估算和生态环境管理的政策设计

黄河上游玛曲草地生态系统的保护对整个黄河流域的生态安全意义重大。本文参考Costanza等人提出的方法和谢高地等人的研究成果估算了玛曲的生态系统服务价值，结果为96.25亿元／年，远高于经济产品1.93亿元／年的现价。基于草地资源可持续利用和牧民生活水平不断改善的要求，提出了以改变超载过牧为目标、以生态补偿为核心内容的草地生态系统管理的政策设计，生态补偿的标准应不少于0.93亿元／年。生态环境管理的政策内容主要包括：产业开发和产业转型、生态移民和牧民定居、草场管理、技术推广以及控制人口过快增长和促进社会进步等。     

Key factors that influence households’ tree planting behaviour

Despite a decrease in indigenous forests and a growing demand for tree products in developing countries, tree planting activities are not considerably expanding in Tanzania. In this paper, we analyse factors that influence households’ tree planting behaviour, as well as the number of trees planted. Coast and Morogoro regions in the east of Tanzania were selected as the case, and data was gathered from 202 households in 11 villages in these regions where tree planting programmes have been or still are active. A Heckman model is used to analyse the factors that drive tree planting behaviour. Results indicate that households get wood energy from forest reserves (57%), in addition to their own planted trees (9.1%). Emperical findings show that the most important factors have significantly positive effects on households’ tree planting behaviour, as well as the extent to which it was implemented. These factors include households’ land sizes, households’ awareness of tree planting programmes, tree planting for wood energy, and the age of the head of the household. The right/freedom to harvest and transport tree products, households’ attitudes towards tree planting, and family size have significantly negative effects on households’ tree planting behaviour. This paper is perhaps the first comprehensive study to analyse the factors that influence households’ tree planting behaviour in Tanzania, and it uncovers results that are useful, even for other developing countries with similar conditions.     

Performance improvement of airfoils for wind blade with the groove

This study was a basic one to explore how much the aerodynamic characteristics of wind blade improve. The extent of improvement according to the shapes of groove placed on the surface of airfoil (NACA0015) was analyzed through computational analysis. A commercial computational fluid dynamics (CFD) code, the ANSYS Fluent 13, was used in this study. In this study, regarding with the positions and shapes of groove, the end of groove was placed at a certain distance (length, l) from both the front and back of separation starting point, the depth and the width were designated as h and d respectively. Analysis was conducted at the 7° angle of attack under the following conditions; the thickness (δ) of boundary layer to the depth (h) of groove ratio (h/δ) 0.6–1.0, the depth (h) of groove to the width (d) of groove ratio (h/d) 0.1–1.4, and the length (l) between the end of groove and separation point to the thickness (δ) of boundary layer ratio (l/δ) ?0.5–0.5. Among these conditions, the best improvement of lift to drag ratio, standing at 15.3%, was under h/δ = 1.0, h/d = 0.12, and l/δ = –0.5 (7° AOA, Re = 360k). In addition, throughout the range of angle of attack, 2–14°, lift to drag ratio improved by 0.8%, 5.1%, 3.2%, and 1.8% each when Reynolds numbers were 280k, 360k, 450k, and 530k. It is also confirmed that the shape of groove contributed to recovering velocity around airfoil wall and the lift to drag ratio improvements by groove were maintained at the given range of Reynolds number and around the angle of attack, 7°.