K2FeO4氧化降解3,4－二甲基苯胺的机理研究

以3,4－二甲基苯胺为目标污染物,高铁酸钾（K₂FeO₄）为氧化剂,考察催化氧化过程中的表观动力学及反应机制,确定高铁酸钾降解3,4 －二甲基苯胺的表观动力学方程为：r=0.0043C_A^0.486C_B^1.2477,反应级数为1.7337,符合准二级动力学方程.同时通过GC/MS技术,分析降解过程的中间产物,推测在高铁酸钾的作用下,3,4－二甲基苯胺先转变成2,4－二甲基苯胺,然后苯环上的氨基及甲基先后被氧化,生成4－硝基间苯二甲酸,再发生脱羧反应,生成硝基苯,硝基苯被高铁酸钾进一步攻击,生成苯环正离子,其后开环生成一系列小分子烃类物质,这些物质继续被氧化,最终生成二氧化碳与水.推测该氧化还原过程的控制反应为两步：第一步,高铁酸钾攻击3,4－二甲基苯胺苯环上的侧链;第二步为苯环的开环反应.此降解过程主要包括表面络合催化与界面催化两种反应机制.     

Fe对污水和污泥处理过程中微生物和工艺性能的影响

铁元素作为微生物体内生化所必须的微量元素,影响微生物的生长及污水处理效果。分析了污水和污泥处理过程中,不同浓度和不同价态Fe促进微生物酶的合成和酶促反应的机理,概括了可能导致的微生物群落结构改变的因素;总结了Fe对EPS的分泌、絮体结构的影响,以及Fe加速生物膜的形成和污泥颗粒化的原理。从工艺角度总结了铁元素对UASB、MBR、污泥厌氧消化和生物制氢等工艺的作用,旨在为未来Fe及其他金属元素促进污水处理中微生物活性技术的研究提供思路及借鉴。     

等离子喷涂制备 ZrB2-SiC 复合涂层及其静态烧蚀性能

目的提高C/C复合材料的抗静态烧蚀性能。方法利用大气等离子喷涂技术在C/C复合材料表面制备ZrB_2-SiC复合涂层,对其进行1500℃的静态烧蚀实验。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)及能谱分析仪(EDS)对涂层的物相成分、微观形貌等进行检测分析。结果采用大气等离子喷涂制备的ZrB_2-SiC涂层是由熔融的粉末粒子紧密堆积而成,呈现典型的层状结构,涂层均匀完整地覆盖于C/C基体表面,厚度约为200μm。涂覆有ZrB_2-SiC复合涂层的C/C复合材料试样在1500℃分别氧化2,3,4 h后,试样依旧保持完整,C/C基体未遭受损伤,试样的质量增加率依次为3.39%,2.95%,4.25%。结论采用大气等离子喷涂技术能够在C/C复合材料表面制备出厚度均匀、结构致密的ZrB_2-SiC复合涂层,ZrB_2-SiC复合涂层使C/C复合材料的抗静态烧蚀性能显著提高。     

Comparative study of plasma lead levels in the staff of Dandy Zinc Factory of Zanjan and in normal individuals

Pollution is a global problem which affects various human population functions. Despite the decline in plasma lead (Pb) levels among the general population during the past 20 years, this metal continues to be a public health concern for individuals with past and present exposures. The objective of this study was to determine blood lead levels (BPbL) in the staff of Dandy Zinc Company and compare them to control subjects. The test group included 40 staff of Dandy Zinc Company of Zanjan, while controls were selected from general population. Five milliliters of blood and plasma was sent to Atomic Energy Organization of Iran (AOEI) reference lab to measure BPbL by Flameless Atomic Absorption. BPbL in test group (16.6 + 8.18 µg dL^?1) was significantly higher than control (10.47 + 2.10 µg dL^?1). In both groups BPbL was significantly higher in smokers than non-smokers. Blood lead levels in molding workers were significantly higher than other workers. BPbL in exposed workers were directly related to duration of work and age. Data indicate Pb exposure was of significant magnitude to be a public health concern especially in zinc-and Pb-related industries.     

某兽药厂废气治理改造工程实例

结合江苏常州某兽药厂废气污染的监测和改造经验,总结了兽药厂废气污染特点,并采用低温等离子体、碱液吸收和植物除臭剂等综合治理技术有效控制了废气污染。低温等离子体净化设备采用2组串联式布置,反应器内设计风速≤1 m/s,反应时间≥4 s。植物除臭净化设备利用原有活性炭吸附塔改造,改造成本较低。改造设备总投资约60万元,废气处理系统运行费用约788元/d。相关监测数据表明上述工艺在设备正常运行时可确保污染物达标排放。     

Experimental study of NO2 reduction in N2/Ar and O2/Ar mixtures by pulsed corona discharge

Non-thermal plasma technology has been regarded as a promising alternative technology for NOx removal. The understanding of NO2 reduction characteristics is extremely important since NO2 reduction could lower the total NO oxidation rate in the plasma atmosphere. In this study, NO2 reduction was experimentally investigated using a non-thermal plasma reactor driven by a pulsed power supply for different simulated gas compositions and operating parameters. The NO2 reduction was promoted by increasing the specific energy density （SED）, and the highest conversion rates were 33.7%, 42.1% and 25.7% for Ar, N2/Ar and O2/Ar, respectively. For a given SED, the NO2 conversion rate had the order N2/Ar 〉 Ar 〉 02/Ar. The highest energy yield of 3.31 g/kWh was obtained in N2/Ar plasma and decreased with increasing SED; the same trends were also found in the other two gas compositions. The conversion rate decreased with increasing initial NO2 concentration. Furthermore, the presence of N2 or O2 led to different reaction pathways for NO2 conversion due to the formation of different dominating reactive radicals.