电感耦合等离子体质谱法测定水中痕量元素

应用电感耦合等离子体质谱法对水样(地表水、饮用水等)中铜、锌、硒、砷、镉、铬、铅、铁、锰等痕量元素进行分析测定。结果表明,方法检出限为0.01~0.78μg/L,平行测定的相对标准偏差为0.6%~7.9%,实际水样加标回收率为90.5%~103%。该方法快速、简便、线性范围大,具有良好的检出限和准确度。     

电感耦合等离子体质谱法测定饮用水中15种稀土元素

采用电感耦合等离子体质谱法测定饮用水中15种稀土元素,采取内标校正法,以Rh、Re、Bi为内标,结合优化仪器条件和干扰校正方程来消除干扰.15种稀土元素的方法检出限为0.000 2μg/L～ 0.003 μg/L,混合标准溶液平行测定的RSD＜ 6％,饮用水样品的加标回收率为98％～120％.     

紫外光协同CuO-TiO_2/Al_2O_3三维粒子电极电催化降解罗丹明B

自制了CuO-TiO_2/Al_2O_3粒子电极,对其进行了表征。在此基础上构建了紫外光协同三维粒子电极电催化体系降解水中的罗丹明B,考察了降解过程的影响因素、动力学及机理。表征结果显示,粒子电极具有良好的表面结构及有效催化成分。实验结果表明:在罗丹明B质量浓度20 mg/L、槽电压15 V、电流0.3 A、溶液pH 3.0、曝气量1.5 L/min、Fe~(2+)投加量0.5 mmol/L的条件下反应60 min,脱色率达96.29%;反应过程符合一级动力学方程,反应速率常数为0.060 mg/(L·min);紫外光的加入使溶液中H_2O_2的浓度降低约30%,促进了H_2O_2的分解。     

Endocrine stress response in Oreochromis sp. from exposure to waterborne cadmium: the plasma cortisol analysis

Cadmium (Cd) is known as one of the most dangerous environmental and industrial pollutants. It has no biological function and accumulates mainly in metabolically active tissue even at low concentrations, which in turn may cause tissue damage. The effect of Cd on the endocrine systems of fish is not well known. To test the hypothesis that Cd is a chemical stressor, Oreochromis sp. were exposed to waterborne cadmium chloride and their endocrine stress response (plasma cortisol) was investigated after 4 days and 20 days. The plasma cortisol levels were analyzed using reverse-phase high performance liquid chromatography with UV detection (λ = 250 nm) after liquid–liquid extraction. The detection limit of the method was found to be 0.87 ng/mL plasma. This study provides evidence that Cd probably causes exhaustion of endocrine systems. Oreochromis sp. exposure to Cd resulted in a 15%–53% and 52%–91% suppression of cortisol release after 4 days and 20 days of exposure, respectively, in comparison with the control group. The results suggest that Cd still activates the endocrine system at 20 days and the interrenal cells of Oreochromis sp. were not impaired after 20 days of exposure to Cd.     

Oral administration of potassium bromate, a major water disinfection by-product, induces oxidative stress and impairs the antioxidant power of rat blood

Potassium bromate (KBrO₃) is a widely used food additive, a water disinfection by-product and a known nephrotoxic agent. The effect of KBrO₃ on rat blood, especially on the anti-oxidant defense system, was studied in this work. Animals were given a single oral dose of KBrO₃ (100 mg/kg body weight) and sacrificed 12, 24, 48, 96 and 168 h after this treatment. Blood was collected from the animals and separated into plasma and erythrocytes. KBrO₃ administration resulted in increased lipid peroxidation, protein oxidation, hydrogen peroxide levels and decreased the reduced glutathione content indicating the induction of oxidative stress in blood. Methemoglobin levels and methemoglobin reductase activity were significantly increased while the total anti-oxidant power was greatly reduced upon KBrO₃ treatment. Nitric oxide levels were enhanced while vitamin C concentration decreased in KBrO₃ treated animals. The activities of major anti-oxidant enzymes were also altered upon KBrO₃ treatment. The maximum changes in all these parameters were 48 h after the administration of KBrO₃ and then recovery took place. These results show for the first time that KBrO₃ induces oxidative stress in blood and impairs the anti-oxidant defense system. Thus impairment in the anti-oxidant power and alterations in the activities of major anti-oxidant enzymes may play an important role in mediating the toxic effects of KBrO₃ in the rat blood. The study of such biochemical events in blood will help elucidate the molecular mechanism of action of KBrO₃ and also for devising methods to overcome its toxic effects.     

Pyrolysis of cellulose under catalysis of SAPO-34, ZSM-5, and Y zeolite via the Py-GC/MS method

Bio-oil from pyrolysis of biomass is an important renewable source for liquid fuel and/or for chemicals. However, the application of bio-oil was severely restricted due to its high viscosity, acidity, and low heating value. Hence, it is necessary to upgrade the bio-oil for deoxygenation or for chemicals by catalytic reactions. In this paper, the catalytic behaviors of SAPO-34, ZSM-5, and Y zeolite on pyrolysis of cellulose were investigated via pyrolyzer combined with gas chromatography and mass spectrometer (Py-GC/MS) method in Py-mode. The results showed that ZSM-5 and Y zeolite could promote the conversions of oxygen-containing components to gases, water, aromatics, and phenols. Comparatively, more gas and water were generated under the catalysis of Y zeolite at lower temperatures, while at temperatures above 700°C, the effect of ZSM-5 became more distinct; aromatics were more generated under the catalysis of ZSM-5, while Y zeolite exerted a more distinct role in promoting the formation of phenols. The effect of SAPO-34 caused more water and furfural derivatives, less aromatics and phenols, and exerted a weak influence on gases.     

Nano-textured polysilicon solar absorption films

Nano-textured polysilicon (poly-Si) solar absorption films are to be applied to the solar receiver of solar thermal electricity Stirling engine. These films were fabricated by deposition of hydrogenated amorphous silicon films (a-Si:H) into poly-Si films, using the pulse-wave modulation plasma and furnace annealing of the a-Si:H films. This is followed by wet etching of poly-Si films into nano-textured structures. The films are then coated with a-SiN_x:H films as the antireflection and protection layers. It was observed that increasing the pulsed plasma turn-on (t_on) time leads to deposition of less dense a-Si:H film with high hydrogen content and void density. This results in films having low dielectric constant and refractive index, and high optical bandgap. Less-dense a-Si:H film can be transferred into large grain size poly-Si film, using annealing. Also, highly rough nano-textured surface structure can be produced, by etching. The denser a-Si:H film, large grain size poly-Si film, and nano-textured surface poly-Si film can enhance the absorbance of sunlight and reduce the emissivity of far infrared light. The nano-textured poly-Si film coated with an a-SiN_x:H layer can effectively increase the absorbance of sunlight to approximately 85% and reduce the emissivity of far infrared light to 49%. The nano-textured poly-Si/a-SiN_x:H films can be used as efficient solar absorption films for solar thermal electricity Stirling engine.     

吸附联合低温等离子体法去除甲苯废气

对介质阻挡放电条件下产生的低温等离子体联合吸附去除低浓度甲苯废气进行了实验研究。考察了反应器内分别填充分子筛、陶瓷环和混合填料时,甲苯的吸附效果;比较了各种填充条件下,低温等离子体对甲苯的去除效果和副产物臭氧的产生量;并对填充混合填料时不同外加电压、不同操作条件下,吸附联合低温等离子体去除甲苯的过程进行系统的研究。结果表明,外加电压相同,混合填料对甲苯的去除率最高,大于97%,依次是分子筛、陶瓷环、无填充;同时混合填料的臭氧浓度小于其他填料;当电压为18 kV时,混合填料可获得较高的甲苯去除率,同时产生的臭氧副产物最少。     

气体循环条件下等离子体催化氧化吸附态苯

采用气体循环方式,对低温等离子体联合Mn Ox-Ag Ox、Co Ox-Ce Ox复合金属氧化物催化剂催化氧化吸附态的苯进行研究,主要考察了苯吸附存储量、氧化背景气体、催化剂对苯氧化性能的影响,并分析了催化剂对O3及N2O副产物产生的影响规律。研究结果表明,采用气体循环方式,有助于实现苯充分氧化为CO2。相同条件下,COx产率、CO2选择性及对O3的分解能力大小依次为:Mn Ox-Ag Ox/γ-Al2O3Co Ox-Ce Ox/γ-Al2O3γ-Al2O3。氧气背景下,气体循环75 min后,Mn Ox-Ag Ox/γ-Al2O3及Co Ox-Ce Ox/γ-Al2O3催化剂存在时,CO2选择性大于95%;气体循环90 min后,与γ-Al2O3所对应的COx产率相比,Mn Ox-Ag Ox/γ-Al2O3、Co Ox-Ce Ox/γ-Al2O3分别提高了38%、17%。FT-IR分析结果表明,等离子体催化氧化苯的主要产物为CO2、CO和H2O,副产物为少量的O3及N2O。     

Cu~(2+)助芬顿法处理高浓度邻苯二甲酸二甲酯废水

Cu2+可以与H2O2发生类Fenton反应,用Fenton法处理同时含有难降解有机物和Cu2+的工业废水时,Cu2+对于Fenton氧化难降解有机物的反应具有促进作用。本实验在高浓度邻苯二甲酸二甲酯(DMP)和Cu2+组成的模拟工业废水中投加Fenton试剂(Fe2++H2O2),利用Cu2+辅助Fe2+催化Fenton反应氧化难降解有机物。通过正交实验,优选反应条件,并进行单因素实验,分析不同Cu2+浓度、初始H2O2浓度、H2O2∶Fe2+(摩尔比)、pH及温度对DMP去除率的影响,以确定最佳的反应条件,并对反应机理进行了初步探讨。当Cu2+浓度为10 mg/L、DMP浓度为250 mg/L、初始H2O2的浓度为499.5 mg/L、H2O2∶Fe2+的摩尔比为4∶1、温度为20℃时,DMP的去除率最高可达到98.67%。本研究为类芬顿法处理难降解有机物和重金属离子共存的复杂工业废水奠定了基础。