Bioabsorbable Soy Protein Plastic Composites: Effect of Polyphosphate Fillers on Biodegradability

The use of biodegradable polymers made from renewable agricultural products such as soy protein isolate has been limited by the tendency of these materials to absorb moisture. A straightforward approach for controlling the inherent water absorbency of the biodegradable polymers involves blending special bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter in a high-shear mixer followed by compression molding. The procedure yields a relatively water-resistant, biodegradable soy protein polymer composite, as previously reported. The aim of the present study is to determine the biodegradability of the new polyphosphate filler/soy protein plastic composites by monitoring the carbon dioxide released over a period of 120 days. The results suggest that the composites biodegrade satisfactorily, with the fillers having no significant effect on the depolymerization and mineralization of the soy protein plastic, processes that would otherwise result in nonbiodegradable composites. Further, the results indicate that the biodegradation and useful service life of these biocomposites may be controlled by changing the filler concentration, making the biocomposites useful in applications in which the control of water resistance and biodegradation is critical.     

Desulfurization of coke oven gas from the coking of coking coal blended with a sorbent and waste plastic

A new way to implement the simultaneous reutilization of solid waste, the desulfurization of coke oven gas (COG), and even the desulfurization of coke by the co-coking of coking coal (CC) and waste plastic (WP) blended with a sorbent is proposed; the evolution of H₂S and the removal efficiency of H₂S from COG during the co-coking process were investigated in a lab-scale cylindrical reactor. The experimental results indicated that for the coking of CC blended with ZnO, Fe₂O₃, or blast furnace dust (BFD) as a sorbent, the instantaneous concentration of H₂S in COG was lower than 500 mg/m³ (which meets the technical specification requirement of the Chinese Cleaner Production Standard–Coking Industry, HJ/T 126-2003) when the molar ratio between the key component of the sorbent and the volatile S in CC or the CC/WP blend, n _Zn+Fe/n _S, was about 1.2 for ZnO and Fe₂O₃, but not for BFD under the same conditions, suggesting that ZnO and Fe₂O₃ are promising sorbents, but that BFD must be treated chemical or thermally before being used as a sorbent because of the size and complicated nature of the influence of its phase/chemical composition on its desulfurization ability. However, for the co-coking of CC and WP blended with ZnO as a sorbent, n _Zn+Fe/n _S must increase to 1.4 and 1.7 for 100/2 and 100/5 blends of CC/WP, respectively, to ensure a satisfactory efficiency for H₂S removal from COG. Part of this paper was presented at the International Symposium on EcoTopia Science 2005 (ISET05), Aug 8–9, 2005, Chikusa-ku, Nagoya, Japan     

生活垃圾塑料分选及利用技术研究

分析了我国城市生活垃圾的组成成分 ,阐述了对我国城市生活垃圾中的废旧塑料进行分选和资源化利用的必要性。提出了从城市生活垃圾中分选塑料和对分选出的塑料进行资源化制板的新技术 ,给出了塑料分选过程的运动参数和板材的性能参数 ,解决了垃圾破碎、缠绕、变重和塑料相容性等关键技术问题 ,制作的板材技术指标符合建筑材料的应用要求。     

环境因素对航空装备失效的影响与对策

阐述了环境因素对航空装备失效的影响,分析了由于环境因素导致航空装备失效所造成的损失．提出了预防航空装备环境失效的对策。     

软木材料力学行为及其缓冲吸能特性研究进展综述

综述了软木材料的力学行为及其缓冲吸能特性方面的研究进展,首先从密度、含水率、温度、构造与缺陷、服役时间等方面阐述了不同因素对木材力学性能的影响.然后从宏观观测和微细观分析两方面概述了软木材料力学性能试验的研究进展,从宏观本构模型和细观模拟方面阐述了数值仿真分析进展,并简述了理论建模方面的研究成果.最后从多方面给出了未来...     

物理气相沉积硬质耐腐蚀磨损防护涂层研究进展

叙述了用物理气相沉积技术制备的硬质耐腐蚀磨损防护涂层的研究进展。重点介绍了腐蚀磨损耦合工况特性和作用机理,单元、多元掺杂氮化物涂层,高熵氮化物涂层,多层、纳米多层、纳米复合、梯度氮化物涂层耐腐蚀磨损性能研究,非金属元素/金属元素掺杂DLC涂层、多层复合DLC涂层耐腐蚀磨损性能研究,并对涂层改性、强化机理和腐蚀磨损失效机制进行了总结。最后,提出了未来物理气相沉积硬质耐腐蚀磨损防护涂层重点发展的方向,应重点发展涂层组元/结构设计、力–电耦合损伤机理研究、高效率研发设计、涂层先进制备装备与评估体系等方面的能力。     

热电池失效分析及等效加速贮存试验技术

目的 建立基于实测环境载荷的热电池等效加速贮存试验技术,掌握其在环境载荷作用下的性能退化规律。方法 在分析热电池组成和所受环境载荷情况的基础上,分析热电池的主要失效模式,设计基于实测环境数据的等效加速贮存试验,开展热电池等效加速贮存试验,分析热电池性能和热图像的变化情况,利用粒子滤波算法对电池剩余电容量进行预测。结果 随加速循环次数（时间）的增加,热电池的电容量下降。热图像表明,热电池经过等效加速贮存试验后,其放电过程表面温度要高于初始放电表面温度。粒子滤波算法能够有效模拟电容量的退化过程,电池剩余电容量预测结果与试验结果误差在10%以内。结论 等效加速贮存试验得到了热电池的性能退化规律,从而为热电池的贮存试验提供一种解决方案。     

基于Bayesian网络的常减压装置设备故障概率分析

为分析影响常减压蒸馏装置平稳运行的设备失效模式及故障部件,基于1 151条设备故障数据,采用Bayesian网络分析方法,分别对离心泵、压缩机、电动机构建基于Bayesian网络的设备故障概率分析模型,分析故障部件、失效模式、故障后果之间的定量概率关系。研究结果表明：离心泵、压缩机、电动机停运的关键致因部件分别为轴承箱密封故障、活塞环故障、轴承故障,同时得到导致设备停运的故障部件敏感度排序。研究结果有助于提高设备故障风险防范及检维修工作效率,同时可为备件优化方案提供思路。     

破片撞击LPG储罐失效数值模拟

在国内外液化气储罐失效的相关理论基础上,运用ANSYS和ANSYS LS-DYNA软件,对液化石油气储罐的失效过程中破片撞击的影响进行了数值模拟,为储罐的安全管理提供了指导.     

伪装遮障材料耐老化性能与机理分析

目的 研究伪装遮障材料在实用期的老化机理,获悉伪装遮障材料失效的主要环境因素。方法 通过分析伪装遮障材料在自然环境和实验室单因素环境中的性能变化,得出影响伪装遮障材料老化失效的主要因素。采用扫描电子显微镜、红外光谱仪、X射线光电子能谱仪表征材料的微观形貌、化学结构和化学成分变化,解释伪装遮障材料的老化机理。结果 获得了在不同自然环境、实验室单因素环境下,伪装遮障材料颜色外观和力学性能的变化规律,得到了伪装遮障材料在老化过程中发生的微观形貌、化学结构和化学成分变化。结论 伪装遮障材料在西双版纳自然环境下的老化程度最大,在济南自然环境下的老化程度最小。光照是导致伪装遮障材料颜色外观及力学性能降低的主要因素。老化过程中,主要是材料表面的聚氨酯发生老化、脱落,导致材料的力学性能下降。伪装遮障材料破坏时,纤维有2种失效形式,一种是纤维脱黏、直接断裂;另一种是纤维脱黏,拔出,或者拔出过程中断裂。