城区大气和塑料大棚空气中酞酸酯的分析

本文报道了济南市大气飘尘和塑料蔬菜大棚空气中酞酸酯的污染情况，探讨了大气飘尘中酞酸酯随季节变化和昼夜更替的变化情况。     

塑料给水管材的选用分析

给水工程中如何根据不同的场合选用合适的塑料给水管材,本文从可靠性、使用寿命和工程造价等方面进行了阐述.     

高压注浆法在破碎岩层掘进中的应用

在破碎岩层中掘进时,威胁安全生产的问题主要是变形破坏和冒落。为此,介绍了在控制巷道变形破坏和处理冒落时一种行之有效的方法──注浆法。即高压注桨法在破碎岩层掘进中的应用经验。     

一种控制粮食工厂溜管噪声的简易措施

溜管噪声产生的原因是物料颗粒与溜管壁及物料颗粒之间相互撞击的结果,提出了降低噪声的简单措施,在溜管中安装缓冲箱和降速板可取得较好的降噪效果。     

Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment

Injection molded specimens were prepared by blending poly (hydroxybutyrate-co-valerate) (PHBV) with cornstarch. Blended formulations incorporated 30% or 50% starch in the presence or absence of poly-(ethylene oxide) (PEO), which enhances the adherence of starch granules to PHBV. These formulations were evaluated for their biodegradability in natural compost by measuring changes in physical and chemical properties over a period of 125 days. The degradation of plastic material, as evidenced by weight loss and deterioration in tensile properties, correlated with the amount of starch present in the blends (neat PHBV < 30% starch < 50% starch). Incorporation of PEO into starch-PHBV blends had little or no effect on the rate of weight loss. Starch in blends degraded faster than PHBV and it accelerated PHBV degradation. Also, PHBV did not retard starch degradation. After 125 days of exposure to compost, neat PHBV lost 7% of its weight (0.056% weight loss/day), while the PHBV component of a 50% starch blend lost 41% of its weight (0.328% weight loss/day). PHB and PHV moieties within the copolymer degraded at similar rates, regardless of the presence of starch, as determined by ¹H-NMR spectroscopy. GPC analyses revealed that, while the number average molecular weight (Mn) of PHBV in all exposed samples decreased, there was no significant difference in this decrease between neat PHBV as opposed to PHBV blended with starch. SEM showed homogeneously distributed starch granules embedded in a PHBV matrix, typical of a filler material. Starch granules were rapidly depleted during exposure to compost, increasing the surface area of the PHBV matrix.     

温州沿海大型塑料垃圾排放特征研究

通过调查温州滨海地区近岸海上渔业、航运码头、滨海旅游及餐饮业等行业塑料垃圾的排放,分析行业区域塑料垃圾赋存特征,并初步估算各行业塑料垃圾排放量.结果表明：海上渔业活动区中,以避风塘渔港（S4）塑料垃圾占比最高（91.68%）,且以聚乙烯、聚苯乙烯和聚丙烯塑料为主,而东沙渔港（S2）和霞关海水养殖区（S6）以聚苯乙烯泡沫为主,占比分别为26.75%和23.66%.海滩餐饮活动区的塑料垃圾最少,塑料垃圾占比为33.13%.各活动区塑料垃圾的主要类型有塑料袋、塑料瓶、塑料盒、塑料管及破碎的塑料块.据估算,海上渔业活动区与滨海旅游区年排放塑料垃圾量约为1.21×10⁴t/a.为从根本上防治海洋塑料垃圾和海洋微塑料污染,需首先对沿海各行业的塑料垃圾排放源头加强管理,如海水养殖与海洋捕捞活动.     

塑料玩具中邻苯二甲酸酯类环境激素检测方法研究

文章建立了一种对塑料玩具中5种邻苯二甲酸酯类物质同时分离和检测的高效液相色谱分析法。以shim-pack VP-ODS(4.6mm×150mm,5μm)为分离柱;以甲醇-水(体积比:90:10)为流动相,流速:1.0mL/min,检测波长:230nm。该方法所测得的5种邻苯二甲酸酯类物质在0.5～1000mg/L内具有良好的线性,相关系数r=0.9996,检出限达0.34～0.96μg/L,平均回收率在93.00%～105.23%。在对样品提取和纯化的基础上,对塑料玩具中邻苯二甲酸酯类物质进行了分析,结果令人满意。     

泥水平衡顶管技术在川气东送管道工程中的应用

介绍了泥水平衡顶管施工中采取的改进措施,实践证明,改进后未发生任何安全事故,且比预期提前了18天。     

取芯过程中煤芯温度分布特征模拟研究*

针对取芯过程瓦斯解吸受煤芯的温度影响不明,造成煤层瓦斯含量测不准的问题,开展对取芯过程煤芯温度分布特征研究。采用自主研制的取芯管自动测温装置在赵固二矿原生结构煤层（f=1.71）进行深度20 m的取芯试验,获得取芯管管壁温升变化规律,变化曲线分为4个阶段:缓慢上升、加速上升、减速上升、缓慢下降阶段;应用COMSOL建立含瓦斯煤传热模型,将管壁的温度变化设置为边界条件,模拟取芯过程煤芯与管壁之间的热交换。结果表明:在取芯时间30 min内,煤芯平均温度快速上升,之后上升速度趋于平稳;在煤芯内,相同时刻,等间距的轴向与径向距离,径向较轴向的温度梯度较大,径向传导快于轴向传导;取芯过程煤芯径向温度Ta与径向距离d、时间t满足指数函数关系。研究结果可为测定取芯过程煤芯的瓦斯损失量提供参考依据。     

喷淋工艺处理PVC塑料生产废气

采用喷淋工艺处理PVC塑料生产废气,将专利的吸收液与改型的喷淋塔相结合,在中试成功的基础上进行了实际工业化应用。应用结果表明:采用该工艺处理某PVC塑料生产企业的生产废气,吸收液在喷淋塔循环液中所占体积分数为15%时,废气中各污染物指标的去除率达85%以上,对于难处理的苯系物也能较好地去除;处理后废气中各污染物指标的含量满足GB 14554—1993《恶臭污染物排放标准》和DB 44/27—2001《大气污染物排放限值》的要求;该工艺装置运行费用较低,仅为电费和少量药剂费用,吸收液可循环使用,设备保养及维护简单,可满足市场需求。