空调系统冷冻水循环水泵变频运行的变温差控制

在分析空调系统变流量运行调节的基础上,提出了变温差控制并给出了控制方案。变温差控制过程不仅具有负反馈,而且具有正反馈,能较好的适应空调负荷的变化。比较分析了变温差控制、定温差控制、定压差控制的节能性,变温差控制的节能潜力最大,是一种最佳控制方式。     

浅谈热泵技术在兖矿集团的应用

通过对兖矿集团所属煤矿供暖小区的现状以及能耗进行调查、分析,本文就如何采用先进的热泵技术,对矿区燃煤小锅炉进行节能技术改造展开探讨,对类似节能改造有较高借鉴作用。     

基于等级全息建模的输油泵机组风险根源辨识*

为“挖掘”输油泵机组风险根源,降低设备预知性维护难度,结合输油泵多准则风险评价,提出1种基于等级全息建模的输油泵机组风险根源辨识方法,运用等级全息建模方法将输油泵系统分解为泵体结构、管理因素、环境因素、操作因素、技术因素、运行因素、设备安装7个子系统进行定性和定量分析。结果表明:相比危险与可操作性分析（HAZOP）、事故树分析（FTA）等传统风险辨识方法,等级全息建模（HHM）对轴承等关键部件以及压力等运行参数的监测更为深入,能够有效辨识输油泵机组高风险情景,提升输油泵的风险辨识效率。     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

Filtering with a drill pump: an efficient method to collect suspended sediment

Water quality monitoring programs across multiple disciplines use total suspended solids (TSS), and volatile suspended solids (VSS), to assess potential impairments of surface water and groundwater. While previous methods for instream filtering have been developed, the need for rapid, cost‐effective, high volume sampling has increased with the need to verify and supplement data produced by sondes and instantaneous data loggers. We present an efficient method to filter water instream with a portable drill pump that results in reduced sample processing time, and potentially reduced error associated with sample transportation, preservation, contamination, and homogenization. This technical note outlines the advantages of filtering instream vs. in the laboratory. It also compares TSS and VSS concentrations filtered with a drill pump vs. standard filtration methods with a vacuum pump as outlined by USEPA methods 160.2 and 160.4. Samples were collected at 4 sites and filtered in the field, or transported to the laboratory and filtered within 12 or 24 h of collection. Overall TSS and VSS samples filtered instream with a drill pump vs. in the laboratory produced similar concentrations with a similar range in variability for each method. Sample filtering with a drill pump decreased processing time by five minutes per sample.     

The impact of the electricity tariff reform on renewable energies and energy efficiency investments: The case of the Italian residential market

This article investigates the impact that the electricity tariff reform is likely to have on investments in renewable energies (i.e., photovoltaics) and the adoption of energy efficiency measures (i.e., installation of heat pumps and efficient home appliances) in the residential market in Italy. The study develops detailed cost comparisons and simulations considering two different investment scenarios (before and after the reform) to conclude that the reform will: (i) have a negative impact on investments in photovoltaic systems; (ii) favor the adoption of energy efficiency measures, such as efficient home appliances.     

污水处理厂一级A出水低温热能的回收与应用

阐述了国内外污水热能的应用现状,介绍了污水源热泵的工作原理、系统优越性、存在的问题。以工程实例证明污水源热泵是高效节能、经济可行、节能环保的新能源,对开发新的清洁能源、减少温室气体排放有重要价值。     

Natural gas engine driven heat pump system – a case study of an office building

ABSTRACT

An eQUEST model was developed to conduct a simulation study of a natural gas engine-driven heat pump (GEHP) for an office building in Woodstock, Ontario, Canada. Prior to the installation of the GEHP, the heating and cooling demands of the office building were provided by rooftop units (RTUs), comprising of natural gas heater and electric air conditioner. Energy consumption for both GEHP and RTUs were monitored for operation in alternating months. These recorded energy consumptions along with weather data were used in the regression analysis. The developed eQUEST models were validated and calibrated with the regression analysis results with respect to the ASHRAE Guideline 14–2014. The eventual models were then applied to investigate the potential annual energy consumption, greenhouse gas (GHG) emission and energy cost savings achieved by using the GEHP in Woodstock, and other cities in Canada, particularly in Ontario.     

泵串联水灭火系统在森林防火方面的应用

现阶段为了适应国际及国内防火形势,出现了以水灭火为主要形式的灭火方式,并且在实际灭火中体现出巨大的优势.其中泵串联水灭火就是一种很好的形式.林海集团设计了一套远距离接力水泵串联供水灭火系统,尝试以手抬水泵(消防泵)接力供水的方式,从有水源的地方经过消防泵的增压,通过消防水带输送到火场,为水灭火工作提供条件,以实现水灭火.     

贵广I回工程HOM3系统软件缺陷改进方法

通过分析贵广I回工程HOM3光测量系统在极控和直流滤波器保护系统中的软件,找到了软件在处理激光管告警信号和通讯故障信息的差异和缺陷,并提出了修改方法。修改方法经过实时数字仿真系统(RTDS)仿真验证,能够区分激光管告警和通讯故障两种不同的顺序事件记录(SER)信息,并准确定位发生通讯故障的通道,对提高工程安全稳定运行具有重要意义。