电化学间接氧化法处理H_2S气体的研究

采用填料塔对铁盐溶液吸收 H2 S的过程进行了初步研究 ,考察了气液比、填料层高度、吸收温度、Fe3+浓度、进气 H2 S浓度和 H+浓度等因素对 H2 S去除率的影响。结果表明 ,气液比、填料层高度和吸收温度对吸收效率的影响比较显著。通过正交试验选出最佳工艺条件 ,在此工艺条件下 H2 S的去除率接近 10 0 %。     

Microbial Poly(L-Lactide)-Degrading Enzyme Induced by Amino Acids, Peptides, and Poly(L-Amino Acids)

Poly(L-lactide)(PLA)-degrading activities of a fungus, Tritirachium album, and two strains of actinomycetes,Lentzea waywayandensis and Amycolatopsis orientalis, were inducible by some proteins (poly-L-amino acid), peptides and amino acids. Extracellular PLA-degrading activity of the culture filtrates was detected when these strains grew in liquid basal medium containing 0.1% (w/v) of (poly-L-amino acids), peptides or amino acids as the enzyme inducer. In addition to PLA-degrading activity, succinyl-(L-alanyl-L-alanyl-L-alanine)-p-nitroanilide (Suc-(Ala)₃-pNA)-degrading activity was observed, implying that the enzymes produced were protease-type. The enzyme activities produced varied between different strains and different inducers. Silk fibroin was the best inducer for A. orientalis and that elastin was the best inducer for L. waywayandensis and T. album.     

Morphological Study on Hydrolytic Degradation of Poly(tetramethylene succinate) Single Crystals and Spherulites

The morphological changes of Poly(tetramethylene succinate) single crystal lamellae by hydrolysis are investigated, using TEM, WAXD and SAXS. And the morphology of PTMS spherulites was also observed by optical microscopy after treatments as well as single crystal lamellae. The edge region of single crystal lamella can be most easily affected in the initial stage of hydrolysis. As the hydrolysis time increases, the lamellae are separated into small fragments which may be started from the uneven or irregular parts of the surface. The WAXD results showed that crystallinity were increased with increasing of treatment time. The lamellar thickness decreased at the initial stage of hydrolysis and increased again. There were cracks on the surface of spherulites after hydrolysis and the direction of cracks were tangential direction of spherulites. This result was thought to be from the uniformity of molecular arrangement in the crystallographic unit cell.     

Application of recombinant gene technology for production of polyhydroxyalkanoic acids: Biosynthesis of poly(4-hydroxybutyric acid) homopolyester

Screening of a large number of bacteria revealed several strains, which utilize 1,4-butanediol and/or 4-hydroxybutyric acid (4HB) as a carbon source for growth and for synthesis of polyhydroxyalkanoic acids (PHA) containing 4HB as one constituent among others (mostly 3-hydroxybutyric acid). However, none of the wild-type strains investigated in this study was able to produce a homopolyester consisting solely of 4HB. Only several poly(3-hydroxybutyric acid)-leaky mutants ofAlcaligenes eutrophus strain JMP222 synthesized poly(4HB) homopolyester, which amounted to approximately 10% (w/w) of the cellular dry matter. If the PHA synthase structural gene ofA. eutrophus strain H16 was expressed in these mutants, the amount of poly(4HB) was increased to approximately 30% (w/w). The occurrence of poly(4HB) was demonstrated by gas chromatographic as well as¹H and¹³C nuclear magnetic resonance spectroscopic analysis.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

加盐法测定高锰酸钾指数

探讨了在碱性条件下，加入氯化钙能提高高锰酸钾对有机物的氧化率，从而得到比常法高的高锰酸钾指数，能真实地反映水体受污染的情况。     

Effects of Cd2+ on the nucleolus in root tip cells of Allium cepa

The effects of different concentrations of cadmium chloride ranging from 0.5 to 20 ppm on the nucleolus in root tip cells of Allium cepa were studied using the silver staining technique. The results indicated that after the treatment with Cd²⁺,different changes in nucleolar morphology appeared. The nucleolar material was extruded from the nucleus into the cytoplasm,and the nucleoli at mitotic metaphase did not disappear. Apparently,cadmium showed a specific effects on the nucleoli in root tip cells of Allium cepa. The possible mechanism behind this phenomenon is also briefly discussed.     

化学-生物絮凝工艺处理上海城市合流污水研究

为了评估化学 生物絮凝处理上海合流污水在技术上的可行性 ,使用聚合氯化铝 (PAC)絮凝剂 ,由于整合了化学与生物的作用 ,在相同絮凝剂投加量条件下 ,化学 生物絮凝工艺比单纯的化学絮凝工艺对污染物的去除率要高 .该工艺提供了高效的处理 ,在满足出水标准的前提下使污水厂建设占地大幅度减少 .在优化的运行条件下 ,CODCr、TP和SS的去除率分别为70 %、6 2 8%和 88% .通过对 8个模拟系统的耗氧实验证明了化学 生物絮凝处理工艺中生物作用的存在 ,从理论上解释了工艺高效的原因     

浅谈混凝剂在气田水处理中的应用

在重庆气矿气田水处理中加入了聚合氯化铝和聚丙烯酰胺,其应结果表明,这两种絮凝剂配合使用的效果较好,能达到石油企业废水回注指标(pH值为6～9,SS小于30mg/L,石油类物质少于10mg/L)。分析了两者单独使用的处理结果,针对目前使用中存在的问题,指出应注意的事项,并对今后重庆气矿气田水处理运行中混凝剂的使用提出了建议。     

密封消解法测定高氯化物废水的化学需氧量

开发出测定高氯化物废水COD的密封消解法，该法可排除高浓度氯离子的干扰。通过丁酮氧化率、氯离子干扰、混配水样和实际水样的测定，对密封消解法和重铬酸钾法进行了验证。试验结果表明：在测定高氯离子废水的COD时，密封消解法优于重铬酸钾法，能够真实、准确地测定废水的COD。     

Biosynthesis and Characterization of Laccase Catalyzed Poly(Catechol)

Enzymatic polymerization of catechol was conducted batch-wise using laccase enzyme produced by the culture Trametes versicolor (ATCC 200801). The polymerization reaction was carried out in 1:1 (v/v) aqueous-acetone solution, buffered at pH 5.0 with sodium acetate (50 mM) in a sealed, temperature-controlled reactor at 25°C. The molecular weight of the produced polymer was determined with GPC. FT-IR, DSC, and TGA were employed to investigate the structure and thermal behavior of synthesized poly(catechol). It was found that catechol units were linked together with ether bonds and thermal stability of the catechol increased in the poly(catechol) polymeric structure effectively. The number average molecular weight of poly(catechol) was found as 813 ± 3 Da with a very narrow polydispersity value of 1.17 showing selective polymerization of catechol by the enzyme.