废旧电脑拆解工艺与资源化案例研究

以某再生资源公司的废旧电脑拆解为案例进行研究,介绍了工艺技术、拆解回收各种资源的数据。研究结果表明,我国废旧电脑人工拆解-破碎-冶炼相结合的工艺,是电子废弃物循环利用、资源高效回收、减少环境风险的较好工艺技术,符合固废处理的3R(替代、减少、优化)原则。     

臭氧/高锰酸钾/BAF工艺污水深度处理研究

采用O3/KMnO4化学氧化法与曝气生物滤池(BAF)联用工艺处理生活污水二级出水,进行长期连续实验,考察pH、O3/KMnO4投加顺序和投加量对氧化效果的影响。结果表明:采用O3/KMnO4化学氧化法在pH为7.2～7.6的条件下,当O3和KMnO4投加量分别为10和1.5 mg/L时,ρ(BOD)/ρ(COD)由0.13提升至0.26,COD和UV254的去除率分别为30.90%和31.97%。在此基础上采用O3/KMnO4/BAF联用工艺,COD和UV254去除率分别提高至71.30%和74.86%。     

长三角典型站点冬季大气PM2.5中OC、EC污染特征

对2015年1月9日~2015年1月31日临安、南京和苏州3个站点采集的PM_(2.5)样品(共计279组),使用热光反射法(thermal/optical reflectance,TOR)分析了样品中有机碳(OC)与元素碳(EC)的含量,并研究了长三角地区冬季PM_(2.5)中OC和EC的污染特征.结果表明,采样期间临安、南京和苏州的PM_(2.5)平均质量浓度分别为(123.56±61.11)、(144.77±62.91)和(156.5±68.97)μg·m-3,均超过我国《环境空气质量标准》(GB 3095-2012)规定的PM_(2.5)日均值75μg·m-3;其中3个站点OC与EC的平均质量浓度依次分别为(21.93±11.69)/(6±3.6)、(20.32±10.3)/(5.39±3.07)和(27.08±14.35)/(6.4±4.29)μg·m-3.临安作为长三角大气环境背景点,OC与EC的污染也较为严重.3个站点OC与EC的相关性为临安(R2=0.83)、南京(R2=0.72)和苏州(R2=0.72),表明冬季长三角地区的碳质气溶胶的来源较为一致和稳定.3个站点样品中的OC/EC值均大于2.0,样品的OC/EC值主要分布在2.5~6.0这个区间内,表明燃煤源和机动车尾气排放源是OC与EC的主要来源.使用EC示踪法估算临安、南京和苏州3个站点的二次有机碳(SOC)平均质量浓度分别为(9.23±5.26)、(6.82±4.36)和(12.56±7.52)μg·m-3,在OC中占比为42%、34%和46%,表明SOC是OC的重要组成部分.后向轨迹显示,PM_(2.5)、OC和EC的质量浓度与主要气团的传输路径有较好的相关性,自空气质量较差区域气团的PM_(2.5)、OC和EC的质量浓度是来自空气质量较好区域的1.14~1.7倍、1.55~2.1倍和1.94~2.47倍.     

山东省汽车喷涂行业VOCs排放特征研究

采用气袋采样-气相色谱/质谱法,采集并分析了山东省内小型通用车、货车、电动商务车以及半挂车4类典型汽车喷涂企业挥发性有机物(VOCs)的排放特征。结果表明:山东省汽车喷涂企业中VOCs排放总量以及检出数量排序为:半挂车喷涂企业电动商务车喷涂企业货车喷涂企业小型通用车喷涂企业。各类汽车喷涂企业喷漆以及烘干车间排放的VOCs大多以苯类物质为主(小型通用车面漆烘干车间除外),在小型通用车以及半挂车涂装企业废气中烷烃类物质占比较大。不同企业以及各企业不同工序之间特征VOCs排放浓度有较大差别,喷漆车间特征VOCs浓度要远高于烘干车间。     

土壤中多氯联苯的综合污染指数评价方法研究

借鉴综合污染指数的概念,引入加拿大环境理事会制订的土壤中多氯联苯(PCBs)标准指标.建立了PCBs污染的毒害性分污染指数(TPI)、持久性分污染指数(PPI)和生物累积性分污染指数(BPI)加权计算的综合污染指数(IPI)评价方法以及各污染指数的相关表达式,确定了土壤环境中PCBs的毒害性转换系数(Ti)、持久性转换系数(Pi)和生物累积性转换系数(Bi).利用建立的土壤中PCBs的综合污染指数评价方法定量评价了现代黄河三角洲地区土壤中的PCBs污染现状,22个采样点的PCBs污染的IPI值在1.1-531.7之间,整个现代黄河三角洲地区的PCBs污染现状属轻度污染.该评价体系综合地考虑了PCB8同系物间的环境行为差异,较现有的PCBs总量评价方法更科学合理,在持久有机污染物(POPs)的污染评价方面具有推广价值.     

The thermal transformation mechanism of chlorinated paraffins: An experimental and density functional theory study

The increasing production and usage of chlorinated paraffins(CPs) correspondently increase the amount of CPs that experience thermal processes. Our previous study revealed that a significant amount of medium-chain chlorinated paraffins(MCCPs), short-chain chlorinated paraffins(SCCPs) as well as aromatic and chlorinated polycyclic aromatic hydrocarbons(Cl-PAHs) were formed synergistically during the thermal decomposition of CP-52(a class of CP products).However, the transformation mechanisms of CP-52 to these compounds are still not very clear.This article presents a mechanistic analysis on the decomposition of CP-52 experimentally and theoretically. It was found that CP-52 initially undergoes dehydrochlorination and carbon chain cleavage and it transformed into chlorinated and unsaturated hydrocarbons. Cyclization and aromatization were the most accessible pathways at low temperatures(200–400°C), both of which produce mostly aromatic hydrocarbons. As the temperature exceeds 400°C, the hydrocarbons could decompose into small molecules, and the subsequent radical-induced reactions become the predominant pathways, leading to the formation of Cl-PAHs. The decomposition of CP-52 was investigated by using density functional theory and calculations demonstrating the feasibility and rationality of PCB and PCN formation from chlorobenzene. The results improve the understanding of the transformation processes from CP-52 to SCCPs and Cl-PAHs as well as provide data for reducing their emissions during thermal-related processes.     

Translating habitat class to land cover to map area of habitat of terrestrial vertebrates

Area of habitat (AOH) is defined as the “habitat available to a species, that is, habitat within its range” and is calculated by subtracting areas of unsuitable land cover and elevation from the range. The International Union for the Conservation of Nature (IUCN) Habitats Classification Scheme provides information on species habitat associations, and typically unvalidated expert opinion is used to match habitat to land-cover classes, which generates a source of uncertainty in AOH maps. We developed a data-driven method to translate IUCN habitat classes to land cover based on point locality data for 6986 species of terrestrial mammals, birds, amphibians, and reptiles. We extracted the land-cover class at each point locality and matched it to the IUCN habitat class or classes assigned to each species occurring there. Then, we modeled each land-cover class as a function of IUCN habitat with (SSG, using) logistic regression models. The resulting odds ratios were used to assess the strength of the association between each habitat and land-cover class. We then compared the performance of our data-driven model with those from a published translation table based on expert knowledge. We calculated the association between habitat classes and land-cover classes as a continuous variable, but to map AOH as binary presence or absence, it was necessary to apply a threshold of association. This threshold can be chosen by the user according to the required balance between omission and commission errors. Some habitats (e.g., forest and desert) were assigned to land-cover classes with more confidence than others (e.g., wetlands and artificial). The data-driven translation model and expert knowledge performed equally well, but the model provided greater standardization, objectivity, and repeatability. Furthermore, our approach allowed greater flexibility in the use of the results and uncertainty to be quantified. Our model can be modified for regional examinations and different taxonomic groups.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

固相萃取-GC/MS法测定水中持久性有机污染物

采用Envi-18固相萃取小柱富集水样,用正己烷/丙酮混合溶剂洗脱水样中42种POPs化合物,再用气质联用法测定。通过优化仪器监测条件,使目标物在0.250 mg/L~5.00 mg/L范围内线性良好。方法检出限为50.9 ng/L~11 640 ng/L,实际水样加标回收率为57.1%~129%,测定结果的RSD为0.1%~13.8%。将该方法用于测定浙江省东苕溪流域的45份水样,结果滴滴涕、六六六等有机氯农药的检出率较高,其他POPs的检出率较低。     

HRT对固定床厌氧反应器运行效果的影响

为了考察水力停留时间(HRT)对炭纤维载体固定床厌氧反应器运行效果的影响,在进水COD分别为20 000~25 000 mg/L和40 000~45 000 mg/L2个浓度范围下,研究了不同HRT对反应器运行效果的影响。结果表明,通过HRT的调整,在达到相同有机负荷(OLR)下,进水COD为20 000~25 000 mg/L的COD去除率和产气量,明显比进水COD为40 000~45 000 mg/L的运行效果好;进水COD为20 000~25 000 mg/L,HRT为14 h,相应的OLR为41.09 kgCOD/(m3.d)时,COD去除率仍然维持在68%以上,沼气容积产气率达到14.55 m3/(m3.d)。炭纤维载体固定床厌氧反应器具有较高的COD去除率、产气效率以及抵抗低pH、高负荷冲击的能力,运行过程中没有发生反应器堵塞的现象。