Measurements of selected PCBs in open urban ambient air of Madrid (Spain)

The focus of this study was to characterize the concentration levels of selected PCBs and compare them to compiled data in order to contribute to the international database. The sampling site is located in the outskirts of Madrid and can be considered an open urban area. 32 samples of air were taken from February 1998 to June 1998 by using a high volume air sampler. Glass fiber filters and polyurethane foam (PUF) were used to collect the paniculate and gas phase material, respectively. PUF plugs were Soxhlet extracted and filters were ultrasonically extracted by using pesticide-grade hexane and dichloromethane, respectively. The cleanup procedure was carried out on a florisil column with hexane and hexane/dichloromethane as elution solvents. GC/MS in a selected ion monitoring mode was used for quantification and 29 selected PCBs congeners were analyzed.     

多氯联苯污染沉积物质量评价研究进展

介绍了多氯联苯污染沉积物质量评价的研究进展 ,其中 ,简单介绍了多氯联苯的有关概况及环境行为、沉积物质量评价方法及基准研究进展 ;最后 ,重点介绍了包括多氯联苯在内的憎水性有机物污染沉积物质量评价的研究现状及存在问题。     

土壤中二噁英/呋喃类物质的ASE高效提取法

研究了用高效溶剂提取方法测定土壤中二英类物质,特别对与提取效率相关的条件如提取次数等进行研究。得出土壤中二英类物质各异构体的提取效率与提取次数有关。提取率99%以上(3次提取),仅要1h。与国外同一土壤索氏提取法的提取结果进行了比较,表明ASE有提取溶剂用量少、时间短、效率高、实验步骤简化等优点。      

利用蚀刻废液生产碱式氯化铜过程中二英类污染物的去除

针对蚀刻废液及其回收后生产的碱式氯化铜产品中二英(PCDD/Fs)和二英类多氯联苯(dl-PCBs)进行了分析研究,并比较了采用去除工艺前后两类污染物含量水平的变化特征.利用高分辨气相色谱/高分辨质谱对样品中PCDD/Fs和dl-PCBs进行分析,结果表明,氯化铜废液中PCDD/Fs和dl-PCBs的平均总浓度分别为264、139 pg·mL-1,而铜氨液中浓度分别为0.09、0.50 pg·mL-1;碱式氯化铜产品中浓度分别为106 pg·g-1(2.79 pg WHO-TEQ2005·g-1)和27.8 pg·g-1(0.69 pg WHO-TEQ2005·g-1);而经过吸附和过滤等去除工艺后,产品中PCDD/Fs和dl-PCBs的TEQ浓度水平分别降低至0.10—0.25 pg WHO-TEQ2005·g-1和0.05—0.72 pg WHO-TEQ2005·g-1,满足欧盟对于矿物源性饲料添加剂中PCDD/Fs和dl-PCBs的限量标准要求.研究表明该工艺能够有效去除利用蚀刻废液生产碱式氯化铜过程中的二英类污染物.     

多氯联苯对我国土壤微生物的生态毒理效应

作为持久性有机污染物(POPs),多氯联苯(PCBs)一旦进入土壤将长期存留并对土栖生物产生潜在危害。土壤微生物是土壤生态系统重要组成部分,研究外源PCBs对土壤微生物的生态毒理效应,筛选出指示PCBs污染的敏感指标并获取可靠的生态毒理数据十分重要。研究以江西红壤和天津潮土为供试土壤,在室内25℃连续培养28 d的条件下进行了生态毒理实验,选择了微生物量碳、呼吸强度、代谢熵、硝化作用、脱氢酶活性、脲酶活性和微生物群落功能多样性为微生物指标。结果显示:1)在28 d培养时间内,多氯联苯(PCBs)的毒性作用随培养时间的延长而增强,且在红壤中的毒性作用强于在潮土中,表明PCBs对土壤微生物的毒性作用存在时间效应并受土壤性质的影响。2)各微生物指标的敏感性不同,微生物量碳、脲酶活性和微生物功能多样性对PCBs污染反应不够敏感,而土壤呼吸强度、代谢熵、硝化作用和脱氢酶活性对PCBs污染反应敏感。3)14 d时,红壤中PCBs对脱氢酶活性、呼吸强度和代谢熵的EC10值分别为1.20、3.18和1.09 mg·kg-1,而在潮土中分别为6.31、4.73和50 mg·kg-1;28 d时,红壤中PCBs对硝化作用、脱氢酶活性、呼吸强度和代谢熵的EC10值分别为2.32、0.77、0.51和0.71mg·kg-1,而在潮土中分别为5.91、1.65、3.00和50 mg·kg-1。综合考虑经济和实际需要等因素,建议将呼吸强度、硝化作用和脱氢酶活性作为PCBs污染土壤生态毒理评价中的首选敏感指标,并建议培养时间设置为28 d。     

Project tocoen. The fate of selected organic pollutants in the environment—iv. soil,earthworms and vegetation 1988

The samples of soils, earthworms and vegetation (needles, lichens, mosses) were collected for the realization of Project TOCOEN (Toxic Organic Compounds in the ENvironment). The samples were collected from three TOCOEN model areas in Czechoslovakia—one city and two rural areas. The samples were analyzed for polycyclic aromatic hydrocarbons (PAHs), chlorinated pesticides (C1‐PEST) and polychlorinated biphenyls (PCBs).     

Detection of polychlorinated biphenyls employing chemical dechlorination followed by biphenyl whole cell sensing system

Polychlorinated biphenyls (PCBs) are a mixture of 209 individual chlorinated compounds commonly known as PCB congeners. These compounds are hydrophobic and are persistent in the environment. Their use was banned in the US a few decades ago because of harmful health effects. Therefore, detection of PCBs in environmental samples is increasingly important. To that end, we have developed a two-step simple and sensitive method for the detection of total PCBs. Specifically, our method involves dechlorination of PCBs to biphenyl followed by detection of biphenyl using a whole cell sensing system as the detection system. The whole cell sensing system consists of cells of the strain Pseudomonas pseudoalcaligenes KF707 harboring plasmid pSD7000. Plasmid pSD7000 contains the gene of lacZ, a reporter protein under the control of the bph operon. The detection is achieved through the emission of light afforded by the expression of reporter protein triggered by the presence of biphenyl. Due to the fact that this operon is activated only by few PCB congeners, a chemical dechlorination method was employed to convert all PCBs to biphenyl, and thus all the PCBs present in a given sample are able to be detected. The results showed that PCB congeners were rapidly (30?min) and efficiently (>98.5%) dechlorinated to biphenyl using a Mg/K₂PdCl₆ catalyst, and the biphenyl could be subsequently quantified using the whole cell sensing system. This hybrid analytical method that combines classical dechlorination with novel biosensing methods may find applications in the on-site monitoring of PCBs contamination levels.     

PCDD/Fs emission, risk characterization, and reduction in China’s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shandong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%–57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.     

北部湾潮间带沉积物中重金属和多氯联苯的分布特征及生态风险评价

选择北部湾9个典型采样点,研究了潮间带沉积物中重金属和多氯联苯(PCBs)的分布特征和生态风险.分析结果表明,Hg、As、Cu、Pb、Zn、Cd、Cr等重金属和总PCBs的平均含量分别为0.100、10.00、19.89、45.97、208.65、0.098、17.86 mg.kg-1和1.48!g.kg-1.重金属和PCBs表现出不同的空间变化规律.相关性分析表明,北部湾潮间带的重金属主要来自人为污染;沉积物的粒度参数和有机质含量等性质特征是影响PCBs分布和迁移的重要因素;重金属和PCBs总量之间不存在明显的相关性.生态风险评价结果表明,PCBs和Cd是北部湾潮间带最主要的生态风险因子,Zn和PCBs是优势污染物;研究区域总体处于中等生态风险等级,表明沿岸港口和临海工业等人为活动已经对北部湾滨海地区造成了一定的环境压力.     

Determination of persistent organic pollutants by gas chromatography/laser multiphoton ionization/time-of-flight mass spectrometry

An authentic mixture of polychlorinated biphenyls was measured using a short wide-bore capillary column for the group separation of major components present in an actual sample of Kanechlor. The limits of detection were improved by ca. 2 fold in comparison with those obtained using a conventional capillary column, since the retention time was reduced and the amount of analytes introduced into the mass spectrometer per unit time could be increased. On the other hand, surface-water and sediment samples containing polycyclic aromatic hydrocarbons (PAHs) were collected from the river located in the vicinity of a waste water treatment plant. Even acenaphthylene, a minor component of the mixture could be measured for the sediment sample, and the concentrations were determined for several heavy PAHs. As demonstrated, a technique involving laser multiphoton ionization/time-of-flight mass spectrometry was useful as a sensitive and selective analytical tool for the trace analysis of persistent organic pollutants in an environmental sample.