Al13形态的凝胶层析分离及分离级分特性对比

采用聚丙烯酰胺凝胶柱层析法分离纯化聚合氯化铝(PAC)中的Al₁₃形态,并采用Al- Ferron逐时络合比色法、透射电镜(TEM)和ZATESIZER测定仪对分离纯化过程中所得3个级分进行了分析表征和电荷特性的研究;采用烧杯实验法对3个级分处理实际和模拟水样的混凝效果进行了对比性研究.Al- Ferron逐时络合比色法和TEM结果表明,在层析法分离中级分随着洗脱时间延长按分子的大小依次洗脱下来,因此截取中间组分即可得到含量95 %左右的纳米Al₁₃形态;电荷特性和混凝效果研究结果表明,第3个级分其他两者具有更好的除浊、除腐殖酸和脱色效果,并且具有更强的电中和能力,因此Al₁₃形态是一种具有较高正电荷和较高的水解稳定性以及宽的pH适用范围,在给水和废水处理中是一种较为有效的Al形态.     

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

纳米铁强化的混凝-沉淀-过滤工艺对典型印染废水中有机物去除

以东江流域某典型印染企业尾水为研究对象,将混凝剂与少量的纳米铁进行复合投加,再结合多介质过滤器对印染尾水进行深度处理实验研究.结果表明,新型混凝剂HPAC-9对极性有机物具有较强的去除能力,但对非极性或弱极性有机物去除效果不很理想.通过将纳米铁与HPAC-9复合投加并结合多介质过滤工艺,对印染企业尾水中的有机污染物进行...     

沉淀—树脂吸附法处理对氨基偶氮苯盐酸盐生产废水的研究

对氨基偶氮苯盐酸盐（ＰＡＢＳ）是生产染料的重要中间体。在ＰＡＢＳ生产过程中，排放出高浓度（ＣＯＤ４万～８万ｍｇ／Ｌ）、高色度（４万～８万）、高毒性（含苯胺和对氨基偶氮苯）和高氯（Ｃｌ－４万～１０万ｍｇ／Ｌ）的废水。利用中和沉淀—大孔吸附树脂吸附法进行了处理工艺的小试研究。结果表明，废水色度去除率达到９９９％，降到２０以下；出水中基本不含对氨基偶氮苯（ＰＡＢ）；出水中苯胺的浓度降到３ｍｇ／Ｌ。ＧＣ／ＭＳ分析的结果表明，乙醇脱附液中苯胺是最主要的有机物，所以利用该工艺能实现苯胺的回收。     

聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.     

Enhanced cyanogen chloride formation after UV/PS and UV/H2O2 pre-oxidation and chlorination in natural river water

Ultraviolet/persulfate (UV/PS) and Ultraviolet/hydrogen peroxide (UV/H₂O₂) have attracted much attention in recent years as advanced oxidation processes for water treatment. However, it is not all clear how these two methods affect the formation of cyanogen chloride (CNCl) in the subsequent water chlorination process. In this study, it was found that both UV/H₂O₂ and UV/PS pre-oxidation promoted the formation of CNCl in six actual water samples collected from urban rivers. Glycine, uric acid, arginine and histidine were investigated as the model compounds to explore the effects of different methods on the production of CNCl. The results showed that compared with chlorination alone, pre-oxidation by UV/H₂O₂ and UV/PS can reduce the production of CNCl for glycine and uric acid by up to 95% during post-chlorination process. However, they can greatly promote the formation of CNCl for arginine and histidine by up to 120-fold. In a more detailed investigation, pre-oxidation of histidine formed highly reactive intermediates to chlorine, leading to increased CNCl formation and chlorine consumption. The results showed that the precursors of CNCl was altered after pre-oxidation, and need to be re-evaluated.     

气相色谱法测定空气和废气中氯乙烯的改进

因填充柱装柱繁琐,柱效低,最低检出浓度高,不能判别无组织废气中氯乙烯的浓度是否达到《大气污染物综合排放标准》（GB16297—1996）排放限值的要求;用毛细管柱能满足分析的要求。     

硫氰酸汞分光光度法测定氯化氢中的影响因素及解决方法

大气中氯化氢常以气体或盐酸雾状态存在,氯化氢气体和大气中的水蒸气作用形成盐酸雾,具有强酸性,能刺激上呼吸粘膜,可引起气管炎,出现咳嗽、胸闷、头晕等症状。在硫氰酸汞分光光度法测定空气中氯化氢时,其方法灵敏、简便,但选择性差,影响因素较多,本文通过对氯化氢测定中硫氰酸汞浓度、试剂配制的方法、全程序空白测定及操作方法、采样过程等因素进行总结、探讨和分析,确定适合的测定条件,提高测定结果的准确度和精密度。     

氯化钙种子气溶胶对甲苯二次有机气溶胶与氨形成含氮有机物的影响

苯系物光氧化反应形成的二次有机气溶胶(SOA)是大气细粒子的重要组成部分.SOA羧酸和二元醛组分能与氨反应形成有机酸铵和咪唑类含氮有机物,它们能够吸收205 nm和270 nm的紫外辐射,是棕色碳的主要组分.氯化钙等无机种子气溶胶具有较大的比表面积,可为气相羰基化合物和氨提供凝结与反应载体,从而影响含氮有机物的形成.基于此,本文利用烟雾腔研究氯化钙种子气溶胶存在时甲苯SOA与氨的反应,采用紫外-可见分光光度计测量产物溶液在205 nm和270 nm处的吸光度,并定性研究不同浓度、湿度和酸度的氯化钙种子气溶胶对含氮有机物形成的影响.结果表明:氯化钙种子气溶胶能够促进甲苯SOA含氮有机物的形成;含氮有机物的生成浓度随着氯化钙种子气溶胶浓度和pH值的增加而逐渐增大.但当氯化钙种子气溶胶为碱性时,OH~-会与凝结的有机酸发生酸碱中和反应并抑制二元醛化合物水合形成四醇产物,从而不利于含氮有机物的生成;水分子的增加占据了氯化钙种子气溶胶表面的吸附活性位点,氨被吸附和凝结的量减少,从而导致含氮有机物的生成浓度随着相对湿度的增大而降低.本研究可为人为源SOA棕色碳的形成机制和化学组成研究提供实验依据.     

改性人造沸石处理含黄玉铬洁(Ⅵ张焕)祯地下水的实验研究

为了提高人造沸石对地下水中铬(Ⅵ)的去除能力,采用氯化铝对人造沸石进行改性。确定最佳改性条件:20%氯化铝溶液,液固比12 mL/g,室温下以180 r/min振荡改性8 h;最佳除Cr(Ⅵ)条件:pH值为4～8,液固比为33.3 mL/g,室温下水浴恒温振荡2 h。改性沸石对铬(Ⅵ)的吸附符合Langmuir及Freundlich等温线方程,由Langmuir吸附等温线可得其吸附容量为5.624 mg/g。在最佳反应条件下,水样中铬(Ⅵ)浓度可由5 mg/L下降到0.026 mg/L,低于0.05 mg/L,满足GB/T 14848—93《地下水环境质量标准》Ⅲ类标准。