Adsorption selectivity of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents

Both bottle-point and column-feeding experiments involving different solutes and sorbents were carried out to investigate the adsorption selectivity and separation performance of salicylic acid and 5-sulfosalicylic acid. Their adsorption isotherms onto such hypercrosslinked polymeric adsorbents as NDA-100 and NDA-99 could be well described by the Freundlich equations whose characteristics describe extrathermic and favorable adsorption processes. The adsorption towards NDA-100 mainly depended on the π-π interaction, while that towards NDA-99 was extremely influenced by the static-electric interaction. Additionally, the adsorptive capacity of salicylic acid on NDA-99 decreased while it increased on NDA-100 with the presence of 5-sulfosalicylic acid in the adsorptive environment as the competitive component. Comparatively, the adsorption capacity of 5-sulfosalicylic acid decreased on both resins with salicylic acid as the competitive component. In fact, the difference in the interaction between adsorbent and adsorbate resulted in the straight antagonism on the effective adsorption sites on the adsorbent. In conclusion, the adsorption selectivity of salicylic acid onto NDA-100 was obviously larger than that onto NDA-99 with the existence of 5-sulfosalicylic acid in the adsorptive environment. A satisfactory separation and recovery of tested solutes in aqueous phase could be foreseeably achieved by the sequencing adsorption technique involving NDA-100 as well as NDA-99. Translated from Environmental Pollution & Control, 2005, 27(8): 570–574 [译自: 环境污染与防治]     

胞外聚合物、Ca2+及pH值对生物絮凝作用的影响

应用阳离子交换树脂从活性污泥中提取了胞外聚合物(EPS),考察了EPS、Ca2 及pH值对生物絮凝作用的影响.结果表明,当pH≥7.5, EPS≥70mg/L,[Ca2 ]≥300mg/L时,有利于生物絮体的形成.通过正交试验,得出pH值、EPS和[Ca2 ]对生物絮体形成综合影响的回归方程: h浊度= -901.70 97.35pH 1.96[Ca2 ] 9.08EPS-0.11pH[Ca2 ]-0.91pHEPS-0.02[Ca2 ]EPS 0.0021pH[Ca2 ]EPS.回归分析表明,pH值对生物絮体形成影响最显著,其次是EPS和Ca2 .     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.     

厌氧-接触氧化工艺二级出水混凝除磷

为解决厌氧-接触氧化工艺处理生活污水除磷效果欠佳的问题,采用聚磷硫酸铁（PPFS）对该工艺二级出水进行混凝除磷实验研究。考察了PPFS投加量、初始pH值、温度、浊度以及与助凝剂（聚丙烯酰胺）复配对除磷效果的影响。研究表明,PPFS可有效降低出水TP浓度,当投加量为40 mg·L-1时,TP浓度能从3.71 mg·L-1降至0.34 mg·L-1左右,满足《城镇污水处理厂污染物排放标准》（GB 18918-2002）一级A排放标准限值（TP≤0.5 mg·L-1）。利用PPFS对生物除磷工艺二级出水进行化学除磷是一种有效、可行的选择。     

絮凝-电解氧化联合处理氰化提金废水

采用絮凝-电解氧化联合技术处理氰化废水,主要研究了聚硅酸铝铁 (PSAF) 添加量、絮凝时间、pH、电压、电解时间、极板间距对总氰(CN_T)、游离氰(CN⁻)、Cu、Zn离子去除率的影响,并对其反应机制做了分析。研究表明,当PSAF添加量为2 g·L⁻¹,絮凝时间为30 min,pH为9条件下,CN_T、CN⁻、Zn、Cu离子的去除率分别可达42.97%、100%、84.40%、34.88%。Zn(CN)₄²⁻、Cu(CN)₃²⁻、CN⁻的吸附量分别为567.88、89.76、439.74 mg·L⁻¹。以钛板为阴极,石墨板为阳极,采用一阴两阳体系对絮凝后液进行电解氧化实验,在电压为3 V、电解时间为2 h、极板间距为10 mm条件下,CN_T、CN⁻、Zn、Cu离子的去除率可达91.70%、100%、99.15%、94.49%。絮凝过程中Zn(CN)₄²⁻、Cu(CN)₃²⁻、CN⁻的去除是由电荷中和和化学吸附共同作用的,其中电荷中和起主要作用。Zn(CN)₄²⁻、Cu(CN)₃²⁻、CN^-的化学吸附主要归因于其与PSAF水解产生的羟基阳离子发生交换反应。XRD分析表明,加入酸性絮凝剂PSAF的瞬间,部分Zn(CN)₄^2-反应为Zn(CN)₂沉淀。电解氧化过程中Zn(CN)₄²⁻、Cu(CN)₃²⁻破络释放的氰根会被阳极表面产生的O₂、·OH完全氧化为N₂和CO₂,Zn、Cu离子在阴极板电沉积而被去除。     

盐度对模拟餐厨垃圾发酵液产聚羟基脂肪酸酯工艺的影响

利用餐厨垃圾发酵液生产聚羟基脂肪酸酯(PHA)可以在废物处理的同时实现有价资源回收。为探究发酵液中盐分对产PHA菌群富集过程的影响,以模拟餐厨垃圾发酵液为底物,研究了盐度存在下污泥理化性质、富集过程主要指标及菌群PHA合成能力等变化。结果表明,未经盐度富集的菌群易受到盐度抑制,在15 g·L⁻¹的盐度条件下,污泥PHA最大合成量可降至39.9%。富集过程中盐度的增加有利于污泥沉降性的提升,低盐度(5 g·L⁻¹)下菌群分泌胞外聚合物量最多,达49.8 mg·g⁻¹(以VSS计),对菌群保护能力最强。不同盐度条件下的富集系统皆能保持较好的生态选择压力,但盐度对微生物生长的抑制随着浓度的增大而增强。经过盐度存在下长期富集后的污泥,在高盐度(10、15 g·L⁻¹)底物条件下,仍能获得较高的PHA最大合成能力,但其较低的生长活性不利于最终PHA产量的提升,短期富集下,高盐度会抑制PHA的合成;而低盐度(5 g·L⁻¹)有助于提高PHA合成能力,最高达50.5%。     

芬顿与氧化钙联合处理填埋库污泥的力学特性

面对城市生活污泥填埋库容趋于饱和的现状,亟需研究开发城市生活污泥的减量化及资源化技术。以填埋库污泥和新鲜污泥为研究对象,进行岩土工程特性实验,发现填埋库污泥有机质含量及含水率远低于新鲜污泥。通过固结实验和直剪实验,分别对比、分析了未加药剂的填埋库污泥和药剂调质填埋库污泥的固结系数、渗透系数和抗剪强度变化规律。结果表明：填埋库污泥在pH为4时,芬顿试剂(硫酸亚铁和过氧化氢)的最佳配比为Fe²⁺=8%、H₂O₂=12%;当氧化钙投加量增加时,调质污泥的压缩指数减小,抗剪强度略微增大;考虑到联合处理后污泥的资源化利用、强碱性对环境的影响和处理成本,在实际污泥处理工程中,氧化钙投加量15%是较为合适的添加量,且效果优于常用的氯化铁药剂调制污泥。经芬顿与氧化钙联合处理的填埋库污泥抗剪强度满足填埋库要求,能够实现减容减量,对填埋库污泥后续资源化利用具有一定的指导意义。     

压力环境下活性污泥的耐盐驯化过程

通过逐步提高盐浓度的梯度盐度方法驯化耐盐活性污泥,采用加压-常压对比实验,探讨活性污泥耐盐驯化过程中,0.3 MPa的压力环境对有机物降解规律、污泥脱氢酶活性及胞外聚合物（EPS）含量的影响。结果表明,经耐盐驯化的活性污泥在5%的高盐度环境下仍可达到75%以上的有机物去除率;当驯化盐度达3.5%及以上,加压耐盐活性污泥有机物去除率及污泥脱氢酶活性均高于常压,其优势更为突出。耐盐驯化过程中活性污泥胞外聚合物（EPS）含量较稳定,加压系统EPS含量低于常压,这可能是加压活性污泥法可以实现原位污泥减量的重要原因之一。     

垃圾填埋场渗滤液物化深度处理研究

通过Fenton法和结合聚合硫酸铁的混凝作用,实现垃圾渗滤液氧化塘出水COD的深度处理;并利用水泥水化产物的凝胶物质,强化COD去除率。30％H2O2投加量为0．75mL／L、七水硫酸亚铁投加量为1．5g／L、n（H2O2）：n（Fe^2＋）=1．2：1（摩尔比）时,Fenton法对渗滤液COD的去除率可达52％;水灰比为2：1、搅拌24h的水泥水化物将Fenton法的出水pH值从4调至10,该工艺流程总的COD去除率为73．6％,较普通的Ca（OH）2调节法提高9．3％,出水COD可以从进水的1200mg／L降至315mg／L。     

硫酸铝渣和硫铁矿烧渣制聚硅酸硫酸铁的研究

研究硫酸铝渣和硫铁矿烧渣制聚硅酸硫酸铁的工艺流程及其主要参数.提取硫酸铝渣中的SiO2得到Na2SiO3溶液,提取硫铁矿烧渣中铁得到FeSO4结晶.用FeSO4结晶制备聚合硫酸铁.用含3.5% SiO2的Na2SiO3溶液,控制pH=4.0,制得聚硅酸,将聚合硫酸铁加入聚硅酸制得聚硅酸硫酸铁絮凝剂.红外光谱分析表明,聚硅酸硫酸铁结合了SO2-4.检测了聚硅酸硫酸铁对模拟浊水和垃圾填埋场渗滤液的絮凝效果,用铁和硅物质的量比为0.5、用量0.5 mL/L的聚硅酸硫酸铁,处理模拟浊水,除浊率可达90%以上.用铁和硅物质的量比为1.5、用量4.0 mL/L的聚硅酸硫酸铁处理垃圾填埋场渗滤液生化处理尾水,CODCr去除率可达60%.