Modeling urban films using a dynamic multimedia fugacity model

A thin film coats impervious urban surfaces that can act as a source or sink of organic pollutants to the greater environment. We review recent developments in the understanding of film and film-associated pollutant behavior and incorporate them into an unsteady-state version of the fugacity based Multimedia Urban Model (MUM), focusing on detailed considerations of surface film dynamics. The model is used to explore the conditions under which these atmospherically-derived films act as a temporary source of chemicals to the air and/or storm water. Assuming film growth of 2.1 nm d⁻¹ (Wu et al., 2008a), PCB congeners 28 and 180 reach air-film equilibrium within hours and days, respectively. The model results suggest that the film acts as a temporary sink of chemicals from air during dry and cool weather, as a source to air in warmer weather, and as a source to storm water and soil during rain events. Using the downtown area of the City of Toronto Canada, as a case study, the model estimates that nearly 1 g d⁻¹ of ∑₅PCBs are transferred from air to film to storm water.     

水体中常见无机阳离子对TiO2薄膜光催化还原Cr（Ⅵ）的影响

选择了6种水体中常见的阳离子（Na^＋、Mg^2＋、Ca^2＋、Al^3＋、Cu^2＋、Ni^2＋）,分别考查了其对TiO2薄膜光催化还原Cr（Ⅵ）的影响;从光吸收、无机离子本身的性质对光生电子的捕获及传递等讨论了上述离子影响TiO2薄膜光催化还原Cr（Ⅵ）的反应速率的原因。结果表明：由于其不能捕获光生电子,Na^＋、Mg^2＋、Ca^2＋本身对TiO2薄膜光催化还原Cr（Ⅵ）的反应速率影响不大;Al^3＋吸引电子能力较强,成为光生电子和Cr（Ⅵ）之间的桥梁,促进了Cr（Ⅵ）的还原;浓度为1 mmmol/L时,Cu^2＋显著地促进了Cr（Ⅵ）的光催化还原,其主要原因是Cu^2＋捕获光生电子的能力很强,起到了催化剂的作用,而浓度大于10 mmol/L时,Cu^2＋形成单质Cu以及对紫外光的吸收都使促进作用降低;Ni^2＋未充满的d轨道具有获得并传递光生电子的能力,也促进了Cr（Ⅵ）的还原;在浓度同为1mmol/L时,对Cr（Ⅵ）光催化还原的促进作用依次为：Cu^2＋〉Al^3＋〉Ni^2＋〉Na^＋、Ca^2＋、Mg^2＋。     

Polymer Barrier Films

Many polymers such as polyolefins (polyethylene, polypropylene), poly(vinyl chloride), aliphatic polyamides, poly(ethylene terephthalate), polycarbonate, and others are used as protective barrier films against the mass transport of small molecules of gases, vapors, and liquids (known as diffusates, permeants) in different applications. The barrier properties depend on the polymer characteristics such as solubility, diffusion, permeability, and others, the nature of the fluid, temperature, and other factors. Mainly polymer barrier film application in packaging, construction, and agriculture are discussed.     

Storage stability of injection-molded starch-zein plastics under dry and humid conditions

Corn starch and zein mixtures (4 : 1 dry weight) were extruded and injection-molded in the presence of plasticizers (glycerol and water). Tensile strength and percentage elongation of the molded plastics were measured before and after 1 week of storage under a dry or humid condition (11 or 93% RH). With 10–12% glycerol and 6–8% water, injection-molded plastics had relatively good tensile properties (20- to 25-MPa tensile strength and 3.5–4.7% elongation). But while exposed to dry conditions (11% RH), the molded plastics lost weight (0.5–1.5% in 7 days) and became very brittle, with significant decreases in tensile strength and elongation. Partial replacement (5–10%) of starch with a maltodextrin (average DE 5) reduced the glass transition and melting temperatures of the starch-zein mixture as well as the dry storage stability. Using potato starch instead of corn starch significantly improved the dry storage stability of the injection-molded starch-zein plastics (18- vs 11-MPa tensile strength). Anionic corn starches with a maleate or succinate group (DS<0.01) produced injection-molded plastics with improved tensile properties and storage stability. Plastics prepared from the starch maleate and zein mixture retained the strength during 1 week of dry storage without a significant change (26-MPa tensile strength and 3.7% elongation after 1 week of storage).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Journal paper No. J-15561 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2863.     

Synthesis of cellulose-fatty acid esters for use as biodegradable plastics

Long-chain fatty acid carbohydrate esters (FACE) were synthesized by the acid chloride-pyridine reaction to different degrees of substitution (DS). The hydrolyzed soybean oil was used as the source of unsaturated fatty acids. High molecular weight FACE polymers are insoluble in common solvents, such as benzene, toluene, THF, etc., and are highly water resistant. However, FACE polymers of hydrolyzed cellulose (MW 180 kD) are soluble/swellable in toluene and can be cast into tough, flexible films. FACE polymer properties of tensile strength and clasticity vary with degree of substitution and polymer size.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.     

废塑料生产汽柴油技术分析与应用中的误区

从废塑料生产汽柴油技术的工艺流程入手，对该项技术中存在的一些问题进行了分析，内容涉及原料来源及范围，裂化反应条件，传热与除焦，油品质量及收率，新形成的污染和经济效益评估等；指出了此项技术在应用中存在的误区。     

Effects of Starch Moisture on Properties of Wheat Starch/Poly(Lactic Acid) Blend Containing Methylenediphenyl Diisocyanate

Methylenediphenyl diisocyanate was found to improve the interfacial interaction between poly(lactic acid)(PLA) and granular starch. The objective of this research was to study the effect of starch moisture content on the interfacial interaction of an equal-weight blend of wheat starch and PLA containing 0.5% methylenediphenyl diisocyanate by weight. Starch moisture (10% to 20%) had a negative effect on the interfacial binding between starch and PLA. The tensile strength and elongation of the blend both decreased as starch moisture content increased. At 20% moisture level, the starch granules embedded in the PLA matrix were observed to be swollen, resulting in poor strength properties and high water absorption by the blend.     

Degradation of Polylactic Acid (PLA) Plastic in Costa Rican Soil and Iowa State University Compost Rows

In this study the degradation of polylactic acid (PLA) plastic films in Costa Rican soil and in a leaf composting environment was investigated. Three types of PLA films were used: Ch-I, (PLA monolayer plastic films from Chronopol, Golden, CO), GII (PLA trilayer plastic films from Cargill Dow Polymers LLC, Minnetonka, MN), and Ca-I (PLA monolayer plastic films from Cargill Dow Polymers LLC). The average soil temperature and moisture content in Costa Rica were 27°C and 80%, respectively. The average degradation rate of PLA plastic films in the soil of the banana field was 7675 M _w/week. Two compost rows were set up at the Iowa State University (ISU) (Ames) compost site. Temperature and relative humidity of the compost rows were kept at 55 ± 5°C and 50 ± 10% RH, respectively. The degradation rates of GII and Ca-I in the compost rows were 113,290 and 71,283 M _w/week, respectively. Therefore, it was estimated that in Costa Rican soil and in compost rows, PLA would be visibly degraded in 6 months and in 3 weeks, respectively.     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake, Lake Taihu, China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

地表载荷对硬岩区埋地管道应力应变影响分析

为研究地表载荷对硬岩区埋地管道力学性能的影响,建立了管-土耦合三维数值模型,分析了地表载荷大小、作用面积、管道压力、管道径厚比及回填土弹性模量对管道应力分布、塑性应变、椭圆度的影响。结果表明:地表压载作用下,高应力区首先出现在管道顶部且呈椭圆形;随着地表载荷及其作用面积的增大,管道高应力区逐渐扩大,管道截面左右两侧也出现应力集中;随着回填土弹性模量、管道壁厚及内压的增加,管道顶部高应力区及最大等效应力均减小。塑性应变首先出现在管顶,且塑性区随地表载荷、载荷作用长度增加而增大,随回填土体弹性模量及管道壁厚增大而逐渐减小;当内压为0~4MPa时,管道塑性应变及塑性区随内压的增大而减小。管道椭圆度随回填土体弹性模量、管道内压、壁厚增加而逐渐减小,随地表压载增大而增大。