部分国家及地区塑料袋减量化经济政策对我国的启示

对我国(不包括港澳台地区)塑料袋管理制度特点分析的基础上,总结其成效以及存在的问题。根据价格杠杆、税收杠杆对部分国家及地区的塑料袋减量化经济政策进行分类,在分析其发展历程、政策内容和管理方式等基础上,借鉴其管理经验,对完善我国塑料袋经济政策提出两方面建议:完善现行塑料袋收费制度,包括扩展管理范围,设置价格下限等;建立塑料袋税收制度,包括实施专款专用,合理化制定税率等。     

油气田瓦斯隧道开挖掌子面围岩安全厚度研究

为降低油气田区隧道施工风险，以龙泉山隧道为依托，采用数值模拟方法对隧道开挖掌子面前方围岩安全厚度进行分析，并结合现场监测数据对所得结论进行验证。研究结果表明:隧道施工使隧址区围岩应力重分布，且应力变化与围岩距掌子面距离L有关，当L≤0.75D（D为隧道净高）时，围岩处于应力释放区；当0.75D相似文献   

Effect of aging level on viscoelastic properties of asphalt binder containing waste polyethylene

Due to inherent advantages, waste polyethylene (generated from domestic sources) has been used as asphalt modifier. This article discusses viscoelastic properties of the polyethylene modified asphalt binder. Several asphalt concrete mixtures were designed by varying polyethylene and asphalt content. Shredded polyethylene incorporated into asphalt concrete by dry mixing process. Using optimised asphalt content (at several polyethylene percentages), mixtures were prepared and compacted. These compacted specimens were aged for different duration in convection oven. Asphalt binder (from aged specimens) was extracted and tested for its viscoelastic properties using dynamic shear rheometer. Comparison of mastercurves indicated increase in complex modulus and decrease in phase angle values with addition of polyethylene at all reduced frequencies. However, the extent of change was highly dependent on frequency, aging duration and polyethylene content. This indicates that the addition of polyethylene provides more resilience to asphalt binder especially with less aging time. Storage modulus mastercurves (at lower frequencies) and relaxation modulus values (at longer time) indicate polyethylene provides additional stiffening to binder. Further, changes in viscous modulus with addition of polyethylene were marginal. Overall results indicate that waste polyethylene improves the properties of asphalt binder over extended loading period when heated for less time during mixing.     

聚烯烃料仓反吹风系统中的安全料位及其确定

介绍了聚烯烃料仓反吹风设置中安全料位的概念及其确定方法,以避免由于通风死区造成静电燃爆事故的发生.     

塑料排水板超载预压法在顺德市道路建设中的应用

采用塑料排水板超载预压法进行特殊路基的设计和施工,并通过对软土路基的变形监测结果进行了分析,评价其安全性。监测结果分析表明．在等量超填土4．5t／m^2预压3个月后固结度普遍达到85％以上,软土路基固结速度很快,且路基在堆载过程中是安全稳定的。实践证明,用塑料排水板超载预压法处理深达20余米、承载力极低的淤泥质粉质粘土排水效果明显,设计与施工方案是可行的。     

高炉喷吹废塑料技术

废旧塑料造成的“白色污染”成为除大气}亏染和水污染之外的第三大污染。废旧塑料是高分子碳氢化合物,将其作为替代煤粉或重油的燃料喷吹进入高炉,既能降焦节能,又能保护环境。介绍了国外应用高炉喷吹废塑料技术的情况并分析了该技术在我国应用的可行性。     

新疆阿瓦提县废旧地膜回收利用研究

阿瓦提县地膜的过量使用使当地土壤环境逐渐恶化,严重污染了农村环境,并影响了农机作业质量的提高。通过分析2011年阿瓦提县地膜使用相关数据及地膜回收利用情况,提出了阿瓦提县地膜回收利用的优化对策:加大对"白色污染"危害性的宣传,提升广大农民群众的生态文明意识;发展废旧地膜回收利用企业,拓宽回收渠道;制定优惠政策,加大支持力度,促进废旧地膜回收利用;从农艺上防治和减少地膜残留;采取人工和机械回收相结合的措施,加大残留地膜回收力度。     

Consumer willingness to pay for plastic bags levy and willingness to accept eco-friendly alternatives in Botswana

Plastic bags, though commonly used for packaging of goods, are highly durable and non-biodegradable. Plastic bag litter serves as a negative environmental externality detrimental to animal health and natural beauty of the environment. In an effort to curtail the excessive use of plastic bags in Botswana, the government introduced a plastic levy targeted at consumers at retail points. This study uses primary data collected from 367 respondents randomly selected from six geospatially and purposively selected shopping malls to determine the consumers’ willingness to pay (WTP) for continued plastic bag usage and their willingness to accept (WTA) to shift to eco-friendly alternatives. The results of the study revealed that open dumping and burning of plastic litter are more common in Maun than in Gaborone. It also showed that there is a significant relationship between the level of education and WTP. Further, there is a significant variation in income and education in respect to environmental awareness. The government should improve its efforts of sensitizing the public about the improper disposal of plastic bags.     

Photo-oxidation of NO using an exterior paint--screening of various commercial titania in powder pressed and paint films

The present work aims to evaluate the photocatalytic activity of photo-TiO(2) from various producers (Evonik, Kemira, Kronos, Millennium, Sachtleben and Tayca), in the form of powder pressed films and upon incorporation in a water-based paint, for outdoor NO abatement. The photocatalytic activity of the different samples was evaluated in terms of NO conversion and selectivity towards nitrite and nitrate ions following approximately the ISO 22197-1:2007(E) standard. The highest yields obtained for powder pressed films were achieved with VLP7000 (0.70), followed by VLP7101 (0.55) and UVLP7500 (0.55), all from Kronos. On the other hand, when incorporated in paint films, the highest yields were obtained with PC500 and PC105 from Millennium and UV100 from Sachtleben (ca. 0.15). The paint matrix plays an important role on the photocatalytic activity. In particular, the time for steady state is one or two orders of magnitude higher when the photocatalysts are incorporated in paint films in relation to the powder pressed films. The paint films were activated following the procedure recommended by the above-mentioned standard. However, the photocatalytic activity of films incorporating P25 (Evonik) was displayed only when higher power radiation and higher humidity conditions were used. This allowed for similar levels of photocatalytic activity as the other paint films.     

光固化3D打印废塑料来源、处置技术和环境影响

光固化技术因其在3D打印行业中具有打印精度高且技术成熟的优势,在工业应用和学术研究方面都受到国内外的广泛关注.随着光固化3D打印技术蓬勃发展,相应而来的废弃物（光固化3D打印废塑料）作为一种新型有机固废,其增长速度不可估量,对环境带来的影响难以预计.基于现有研究,对光固化3D打印废塑料来源、处置技术和环境影响的最新研究进展进行总结分析.结果表明,光固化3D打印废塑料为共价交联热固性塑料,具有较高的活化能,内部化学结构存在对光敏感的显色基团,其原料、形成过程和目前的处置方法均可能对环境或生物体等带来潜在危害.基于此,针对光固化3D打印废塑料未来处置方式的可能性,提出展望和建议,可为光固化3D打印产业清洁发展提供助力.