亲水性塑料弹性填料生物膜法处理模拟废水的研究

通过比较普通塑料弹性填料与亲水性改进后的塑料弹性填料在污水生化处理中的应用效果发现 :亲水性改进的塑料弹性填料在污水的厌氧生化处理中可提高污水处理效率 15 %— 30 % ,在好氧生化处理中可提高污水处理效率5 %— 10 % ,且亲水性改进大大提高了塑料弹性填料的挂膜速度。     

利用废聚苯乙烯泡沫塑料制取涂料的研究

文章阐述了利用废旧泡沫塑料研制和开发各种不同用途的涂料的进展，研究了利用废聚苯乙烯泡沫塑料制取涂料的方法，讨论了该涂料的配方选择及性能指标等。     

水体中常见无机阳离子对TiO_2薄膜光催化还原Cr(Ⅵ)的影响

选择了6种水体中常见的阳离子(Na+、Mg2+、Ca2+、Al3+、Cu2+、Ni2+),分别考查了其对TiO2薄膜光催化还原Cr(Ⅵ)的影响;从光吸收、无机离子本身的性质对光生电子的捕获及传递等讨论了上述离子影响TiO2薄膜光催化还原Cr(Ⅵ)的反应速率的原因。结果表明:由于其不能捕获光生电子,Na+、Mg2+、Ca2+本身对TiO2薄膜光催化还原Cr(Ⅵ)的反应速率影响不大;Al3+吸引电子能力较强,成为光生电子和Cr(Ⅵ)之间的桥梁,促进了Cr(Ⅵ)的还原;浓度为1 mmmol/L时,Cu2+显著地促进了Cr(Ⅵ)的光催化还原,其主要原因是Cu2+捕获光生电子的能力很强,起到了催化剂的作用,而浓度大于10 mmol/L时,Cu2+形成单质Cu以及对紫外光的吸收都使促进作用降低;Ni2+未充满的d轨道具有获得并传递光生电子的能力,也促进了Cr(Ⅵ)的还原;在浓度同为1mmol/L时,对Cr(Ⅵ)光催化还原的促进作用依次为:Cu2+Al3+Ni2+Na+、Ca2+、Mg2+。     

Diffusive gradient in thin FILMS (DGT) compared with soil solution and labile uranium fraction for predicting uranium bioavailability to ryegrass

The usefulness of uranium concentration in soil solution or recovered by selective extraction as unequivocal bioavailability indices for uranium uptake by plants is still unclear. The aim of the present study was to test if the uranium concentration measured by the diffusive gradient in thin films (DGT) technique is a relevant substitute for plant uranium availability in comparison to uranium concentration in the soil solution or uranium recovered by ammonium acetate. Ryegrass (Lolium perenne L. var. Melvina) is grown in greenhouse on a range of uranium spiked soils. The DGT-recovered uranium concentration (C_DGT) was correlated with uranium concentration in the soil solution or with uranium recovered by ammonium acetate extraction. Plant uptake was better predicted by the summed soil solution concentrations of UO₂²⁺, uranyl carbonate complexes and UO₂PO₄⁻. The DGT technique did not provide significant advantages over conventional methods to predict uranium uptake by plants.     

Formation of recycled plastics from depolymerized monomers derived from waste fiber-reinforced plastics

To develop a new method for the chemical recycling of plastics, we examined the formation of recycled polymers from the recovered monomeric materials of solubilized waste fiber-reinforced plastics (FRP) under supercritical alcoholic conditions. Treatment of waste FRP with supercritical MeOH resulted in the formation of monomeric organic compounds that mainly contained dimethyl phthalate (DMP) and propylene glycol. The presence of these materials was confirmed by gas chromatography and nuclear magnetic resonance analyses and they were mixed with new DMP and glycols in various ratios to form unsaturated polyesters. The polymerization progressed successfully for all mixing ratios of the recovered and new DMP. Hardness tests on these recycled polymers indicated that the polymer made from a 1:1 mixture of recovered and new dimethyl phthalate had almost the same level of hardness as the polymers made from new materials. We also examined the formation of recycled FRP by using glass fibers and monomeric materials recovered through the present depolymerization method. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Wood Modification Effects on Weathering of HDPE-Based Wood Plastic Composites

The effects of weathering on the constituents of wood and polymer matrix behavior in wood plastic composites (WPCs) were investigated. WPCs were produced from pine, extractives-free pine, and pine holocellulose fibers (60%) together with HDPE (40%). These composites were subjected to xenon-arc accelerated and outside weathering for a total of 1200 h and 120 days, respectively. The color and chemical changes that occurred on the surface of the WPCs were analyzed using a set of analytical techniques. For pine and extractive-free pine filled composites, the results showed that the total color change, lightness, and oxidation increased, while the lignin content decreased. In addition, the weight average molecular weight (Mw) and number average molecular weight (Mn) of extracted HDPE decreased with an increase in exposure time of the composites. However, HDPE crystallinity increased with longer exposure time. Lightness of holocellulose-based WPC changed the least while the change in its HDPE crystallinity was not significant compared to the other composite types. Therefore, holocellulose-based WPC may be preferred for applications where color stability is of high priority.     

A stochastic weather generation model for Alaska

A specific problem encountered in ecosystem-level simulation of Arctic ecosystems is the depth and extent of the driving variable record. Often, climate records are of short duration, gathered at locations different from the area to be simulated, or do not contain all the variables required by a given model. This paper addresses this problem for ecosystem simulation in Alaska with the development of a weather generator. The generator, called WGENAL, is based on the WGEN climate generator developed and validated in the 48 conterminous states. Because of the extreme variability of weather in Alaska that is not accommodated by the statistical metrics in the earlier model, a new climate generator was developed. WGENAL generates daily values of precipitation, maximum temperature, minimum temperature, solar radiation, and wind run. Precipitation is generated using a Markov chain-gamma model. A two-parameter gamma distribution is used to generate wind run. Temperatures and solar radiation are generated using procedures developed in the earlier study. Validation of the generator shows it provides adequate diurnal and seasonal weather records for Fairbanks. Other comparisons of synthetic weather with observed weather for sites north of the Brooks Range in Alaska are also within the error of the original data.     

Nano-textured polysilicon solar absorption films

Nano-textured polysilicon (poly-Si) solar absorption films are to be applied to the solar receiver of solar thermal electricity Stirling engine. These films were fabricated by deposition of hydrogenated amorphous silicon films (a-Si:H) into poly-Si films, using the pulse-wave modulation plasma and furnace annealing of the a-Si:H films. This is followed by wet etching of poly-Si films into nano-textured structures. The films are then coated with a-SiN_x:H films as the antireflection and protection layers. It was observed that increasing the pulsed plasma turn-on (t_on) time leads to deposition of less dense a-Si:H film with high hydrogen content and void density. This results in films having low dielectric constant and refractive index, and high optical bandgap. Less-dense a-Si:H film can be transferred into large grain size poly-Si film, using annealing. Also, highly rough nano-textured surface structure can be produced, by etching. The denser a-Si:H film, large grain size poly-Si film, and nano-textured surface poly-Si film can enhance the absorbance of sunlight and reduce the emissivity of far infrared light. The nano-textured poly-Si film coated with an a-SiN_x:H layer can effectively increase the absorbance of sunlight to approximately 85% and reduce the emissivity of far infrared light to 49%. The nano-textured poly-Si/a-SiN_x:H films can be used as efficient solar absorption films for solar thermal electricity Stirling engine.     

光纤传导可见光降解亚甲基蓝

针对浓度大、色度高的印染废水难以处理的情况,选用加入光纤的光催化体系进行研究。采用溶胶凝胶法制备了Ag+/TiO2粉体光催化剂,用固体紫外可见光谱、X射线衍射对其进行表征。选用亚甲基蓝溶液作为目标降解物,评价了Ag+/TiO2在可见光下的光催化活性。分别考察了加入石英芯侧光光纤与塑料侧光光纤反应体系下,催化剂量、光纤数量、光照强度和pH值等因素对亚甲基蓝降解实验的影响。结果表明,选用20 mg/L的亚甲基蓝,采用催化剂量为11.67 g/L,500根侧光光纤,300 W的外部光源,pH值约为11时,光催化降解效果最佳,均能达到90%以上。     

Phthalates and perfluorinated alkylated substances in Atlantic bluefin tuna (Thunnus thynnus) specimens from Mediterranean Sea (Sardinia,Italy): Levels and risks for human consumption

Atlantic blue fin tuna (Thunnus thynnus) is a species of great importance for Mediterranean Sea area, from both ecological and commercial points of view. The scientific literature reports few data on the contamination of this fish by emerging organic compounds such as perfluorinated alkylated substances(PFASs) and phthalates, being the latter never been studied in tuna. This study therefore investigated the presence of the PFASs perfluorooctane sulphonate (PFOS) and perfluoroctanoic acid (PFOA) and the phthalate di-2-ethylhexyl phthalate (DEHP), also monitored by its metabolite mono-2-ethylhexyl phthalate(MEHP), to assess both the state of contamination of Atlantic bluefin tuna specimen and the risk due to the toxicity of these compounds for human consumption. While PFOA was never found, detectable levels of PFOS (0.4–1.88 ng/g), DEHP (9–14.62 ng/g) and MEHP (1.5–6.30 ng/g) were found. The results were elaborated relating the accumulation to the size and age of the individuals and showed a correlation between the levels of different pollutants investigated.