聚氨脂泡沫填缝剂生产工艺火灾危险性分析与对策

以聚氨脂泡沫填缝剂基本生产原理及其特点为基础,对生产原料进行火灾危险性分析,结果表明:该类生产场所的火灾危险等级应划分为甲类;提出聚氨酯泡沫填缝剂生产中存在的安全问题及原因;运用危险度评价法对聚氨脂泡沫填缝剂生产工艺的火灾危险性进行了定量的安全评价,得出聚氨脂泡沫填缝剂生产工艺的危险程度为高度危险;并从建筑设计、防火管理和生产工艺等方面提出了预防火灾事故发生的对策。     

废旧冰箱拆解聚氨酯泡沫塑料制备PU/PP复合材料

利用废旧冰箱拆解的聚氨酯泡沫塑料(PU)和聚丙烯(PP)、聚丙烯接枝马来酸酐(PP-g-MAH)为原料,采用物理化学回收技术制备PU/PP复合材料。用正交实验法分析PU填充量、PU粒径和PP-g-MAH 3个因素对PU/PP复合材料力学性能影响的显著性。结果表明,PU填充量对PU/PP复合材料拉伸性能有显著影响,对冲击性能和弯曲性能没有显著影响;在本文的实验范围内,PU粒径对PU/PP复合材料的力学性能影响不大;而PP-g-MAH投加量对PU/PP复合材料具有一定的影响。确定的优化工艺配方为:PU 40%;PU粒径选择2.00 mm;PP-g-MAH投加量10%。采用优化工艺制备的PU/PP复合材料的密度为1 042.88 kg/m3;冲击强度为2.9 kJ/m2;拉伸强度为10.30 MPa;拉伸模量为1 100 MPa;弯曲强度为18.5 MPa;弯曲模量为733 MPa。     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

Lethal Effects of Water Quality on Threatened California Salamanders but Not on Co‐Occurring Hybrid Salamanders

Biological invasions and habitat alteration are often detrimental to native species, but their interactions are difficult to predict. Interbreeding between native and introduced species generates novel genotypes and phenotypes, and human land use alters habitat structure and chemistry. Both invasions and habitat alteration create new biological challenges and opportunities. In the intensively farmed Salinas Valley, California (U.S.A.), threatened California tiger salamanders (Ambystoma californiense) have been replaced by hybrids between California tiger salamander and introduced barred tiger salamanders (Ambystoma tigrinum mavortium). We conducted an enclosure experiment to examine the effects habitat modification and relative frequency of hybrid and native California tiger salamanders have on recruitment of salamanders and their prey, Pacific chorus frogs (Pseudacris regilla). We tested whether recruitment differed among genetic classes of tiger salamanders (hybrid or native) and pond hydroperiod (seasonal or perennial). Roughly 6 weeks into the experiment, 70% (of 378 total) of salamander larvae died in 4 out of 6 ponds. Native salamanders survived (n = 12) in these ponds only if they had metamorphosed prior to the die‐offs. During die‐offs, all larvae of native salamanders died, whereas 56% of hybrid larvae died. We necropsied native and hybrid salamanders, tested water quality, and queried the California Department of Pesticide Regulation database to investigate possible causes of the die‐offs. Salamander die‐offs, changes in the abundance of other community members (invertebrates, algae, and cyanobacteria), shifts in salamander sex ratio, and patterns of pesticide application in adjacent fields suggest that pesticide use may have contributed to die‐offs. That all survivors were hybrids suggests that environmental stress may promote rapid displacement of native genotypes. Efectos Letales de la Calidad del Agua sobre Salamandras de California Amenazadas pero no sobre Salamandras Híbridas Concurrentes     

矿用聚氨酯注浆材料阻燃及加固性能研究

为获得压缩强度和阻燃性能兼顾的聚氨酯注浆材料,通过L9(34)正交试验,研究Mg(OH)2含量、甲基膦酸二甲酯(DMMP)含量、异氰酸酯指数、辛酸亚锡含量对聚氨酯注浆材料的阻燃性能及压缩性能的影响。获得这种聚氨酯注浆材料的最佳制备条件。对比分析最佳制备条件试样及不加阻燃剂试样的热稳定性。结果表明:DMMP含量和Mg(OH)2含量对平均燃烧时间影响显著;Mg(OH)2还有补强加固作用,对压缩强度影响最为显著,其次为异氰酸酯指数。在Mg(OH)2,DMMP,辛酸亚锡质量分数分别为16%,24%和0.4%,异氰酸酯指数为1.10时,聚氨酯注浆材料兼顾阻燃性能和压缩性能,平均燃烧时间为13.9 s,压缩强度为19 MPa,其热稳定性明显优于不添加阻燃剂样品。     

基于层次分析法的热塑性聚氨酯及其纳米复合材料火灾危险性综合评价

聚合物的火灾危险性与热、烟、毒的释放密切相关,但采用不同指标对材料的评价结果不一致。以纳米级蒙脱土(MMT)、氢氧化铝(ATH)和聚磷酸铵(APP)为添加剂的热塑性聚氨酯(TPU)纳米复合材料为研究对象,选取其在静态管式炉、稳态管式炉和锥形量热仪中的相关实验数据,以HCN总浓度作为特殊毒性危害指标,CO和CO_2浓度为一般毒性危害指标,以热释放速率峰值、平均热释放速率、总热释放量为热危害指标,以产烟速率峰值、生烟总量为烟危害指标。进一步细分了火灾烟气中不同毒性气体对于火灾风险的影响,并运用层次分析法计算指标权重,综合评价了热塑性聚氨酯及其复合材料的火灾危险性。结果表明,当添加量为6 wt%聚磷酸铵、3 wt%氢氧化铝与3 wt%蒙脱土时,此时复合材料的火灾危险最低,证明了综合热、烟、毒三个层次来降低聚合物材料火灾危险性是可行的。     

汽车左/右后轮罩冲压工艺及翻边、斜楔翻边模具设计

根据制件的特点 ,分析了其冲压成形的工艺难点 ,制定了合理的工艺 ,简化了模具设计和制造 ,并画出了制件的综合工序图 ,分析了各工序内容和工艺特点 ,说明了各工序模具设计的关键问题。同时以第 5道工序为例 ,重点分析了斜楔翻边、翻边模的结构、工作原理及设计要点     

内燃机螺帽径向夹持下料模和镦挤孔模具设计

根据轴向应力对棒料剪断方式及其断口形状的影响,设计了对螺帽锻造所用热轧棒料能进行精密剪切下料的新型结构的径向支持下料模具.采取增加下六角冲头与凹模的配合长度及配合精度的导向方法,设计了在80吨非标压力机上锻带孔螺帽的成形模具.给出了两种模具的试验结果.     

三维铝型材挤压模多参数优化

以一个导流组合模为例,利用神经网络建立模具参数的数学模型,用遗传算法对参数优化。其中由正交法设计得到实验样本,由软试模提取模具的SDV值,将其作为优化目标。最终实验结果与优化值吻合,为建立和控制挤压模参数提供了一种行之有效的手段。