原状黄土的反压饱和法试验研究

含水量是黄土液化特性研究中的一个至关重要的参数,对原状黄土进行充分饱和是饱和黄土动三轴试验中一个不可回避的课题。以WF公司生产的WF12440型空心圆柱扭剪仪为实验平台,运用反压饱和法,对室内原状黄土进行了饱和试验研究。该仪器提供3种不同加压方式增加围压和反压(孔压),即手动加压、自动加压和线性持续加压,通过检测孔隙压力系数B值是否达到0.95以上来判断黄土是否完全饱和。试验表明,即便是初始饱和度较低的原状黄土,也可以采用反压饱和法,在较短的时间内使孔压系数B值达到0.95以上,实现完全饱和,具体可以采用线性连续加压方式;初始压力差,即围压和反压之差一般可设为10 kPa,起始围压也设为10 kPa,太大或太小都会对试样造成破坏;如果孔压在1分钟内的变化值小于围压和反压之间压力差的5%,则认为孔压稳定,即可进行B值检测。     

实行年度目标考核是促进监测工作发展的有效方法

实行年度目标责任制考核 ,为监测站的改革和发展找到了一条有效途径。文章通过对年度目标考核责任制的方式、方法及实施后所取得成效的介绍 ,为监测站的改革与发展提供了借鉴     

Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.     

Testing Sleeping Bags According to EN 13537:2002: Details That Make the Difference

The European Standard on sleeping bag requirements (EN 13537:2002) describes a procedure to determine environmental temperature limits for safe usage of sleeping bags regarding their thermal insulation. However, there are several possible sources of error related to this procedure. The main aim of this work was to determine the influence of the various measuring parameters on the acuity of the respective parameters in order to judge the requirements. The results indicated that air velocity, mattress insulation and time between unpacking the bag and measurement had a significant impact on the result, with a difference of up to 5–15% in thermal insulation between minimum and maximum allowable parameter levels. On the other hand, manikin weight, thickness of the artificial ground and presence of a face mask were found to have a negligible influence. The article also discusses more general aspects of the standard including the calculation methods used.     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.     

Workaholism and daily recovery: A day reconstruction study of leisure activities

This study among 85 individuals used a day reconstruction approach to examine whether workaholism moderates the relationship between daily activities during non‐work time and daily well‐being in the evening (evening happiness, momentary vigor before bedtime, and momentary recovery before bedtime). Specifically, it was hypothesized that daily work‐related activities during the evening have a stronger negative relationship with daily well‐being for employees high (versus low) in workaholism and that daily physical and social activities have a stronger positive relationship with well‐being for employees high (versus low) in workaholism. The results of multilevel analyses largely supported the hypotheses for daily physical and work‐related activities but not for social activities during non‐work time. These findings imply that organizations should not encourage their employees and particularly those who score high on workaholism to work during non‐work time and instead promote physical exercise. Copyright © 2012 John Wiley & Sons, Ltd.     

基于完全因素分解法的能源效率影响因素研究

“十二五”是我国全面建成小康社会的关键阶段,又由于环境和资源禀赋方面的制约,提高能源效率成为我国经济和社会发展的内在需求.从能源强度的角度出发,分析了我国产业结构和能源效率现状,采用完全因素分解法,从产业结构的角度人手对全国能源效率的影响因素进行了研究.结果表明,技术因素是我国能源效率提高的主要推动力,第二产业对能源效率的影响远远大于第一和第三产业.     

基于灰色聚类法的地铁运营安全趋势分析

为评估地铁运营安全水平,掌握地铁运营风险变化趋势,采用灰色聚类法对某地铁线路运营一年以来每个月份的安全水平进行了分级评价。选取对地铁日常运营具有重要影响的设备设施故障作为评价指标,评价方法挖掘地铁运营以来的历史数据信息,体现了设备设施故障变化的时间特性,减少了安全评价中的主观性。将地铁运营安全水平分为五个安全等级,选取15%、35%、50%、65%、85%作为各安全等级的累积百分频率特征点,建立白化权函数得到各评价指标的灰类白化值。结合各设备设施的指标权重,得到了地铁线路运营一年来每个月份的安全等级情况。该方法为分析地铁运营安全趋势提供了参考。     

数值模拟结合SF_6示踪法确定煤层钻孔瓦斯抽采有效半径

为准确确定煤层钻孔的瓦斯抽采有效半径,实现最优钻孔设计及最佳抽采效果,根据煤层瓦斯流动理论与煤岩体变形理论,建立钻孔抽采煤层瓦斯的气固耦合数学模型。并利用COMSOLMultiphysics软件,模拟SF6气体在瓦斯渗流场内的运移过程。利用SF6气体示踪法进行现场测试。依据相似定律,结合模拟与实测结果确定钻孔抽采有效半径的范围。以黄陵集团一号煤矿306工作面为例进行试验研究。试验结果表明,模拟结果与实测结果基本吻合;在钻孔直径为94 mm,抽采负压为15 kPa的条件下,预抽30天后,试验工作面抽采有效半径为5.88 m。     

复合法在露天矿边坡稳定性分析中的应用

边坡的稳定性问题关系到人们的生命安全,对其进行研究是非常有必要的。以白云鄂博铁矿的D区边坡稳定性分析为例,采用复合法进行研究,首先通过对其边坡进行现场节理的详细线测量绘制赤平投影图,来判断出可能发生破坏的位置;其次通过Sarma法进行平衡理论计算,稳定性系数结果为0．75;最后通过FLAC3D进行数值模拟计算,得出应力、应变云图,另对分析出可能破坏的两个位置进行剖面计算,计算后的稳定性系数结果分别为0．5、0．6。总之,边坡稳定性系数均小于1,可能发生失稳,需对其进行加固,保证矿山安全开采。