企业安全管理体系标准模式的比较研究

采用对比分析法和实证分析法,对当前国内外流行的企业安全管理体系标准模式及其评价方法进行比较研究,旨在把握诸多标准模式的原则、路径、结构、方法和共性特征及其可以发挥的具体优点,将研究的标准模式的评价方法归纳为两大类即体系认证审核法和综合考评打分法,并对两类评价方法的优缺点进行剖析。体系认证审核法的优点是过程方法、符合性及抽样,考评打分法则提供了安全绩效准则。对吸收融合两类评价方法的优点形成综合性评价方法的途径和方式进行了探讨,为企业建立有效、适用的安全管理体系提供了依据。     

城市天然气管道风险特征与肯特法的改进

根据城市高压天然气管道特点,将适合于城市天然气管道风险分析的肯特评分法加以改进,包括调整评分项目和事故因素权重,使其成为适于城市天然气管道的风险分析法。将改进后的肯特评分法应用于常州21km高压天然气管道的风险评价,得出8个相对高风险管段,其分析结果可作为安全管理人员合理分配维护资源的理论依据。工程应用实例证明:改进后的肯特法具有较强的可行性,是城市高压天然气管道风险评估的有效工具。     

建筑火灾风险评价体系的建立与应用探讨

探讨基于安全系统工程思想的建筑火灾风险评价指标体系的建立方法,并在该基础上,通过专家打分和层次分析法,计算得出各指标因子的权重值。根据有关标准和规范,对各评价指标因子进行等级划分,并设计出建筑火灾风险综合分值评分表,为厘定火灾保险费率提供依据。笔者的研究成果为完善建筑火灾风险评价方法、制定财产保险火灾风险评价标准等提供了科学依据。     

煤矿安全生产中人的行为影响因子系统动力学(SD)仿真分析

在构建影响人的安全行为因素因果关系的基础上,运用系统动力学(SD)理论和方法,对影响人的安全行为关键因素进行动态预测,并通过仿真计算、对比分析安全投入增加对系统安全水平的影响。应用该方法建立的煤矿生产中人的安全行为指标水平模型,以求证安全投入与人的安全行为水平的相关性,为煤矿安全管理决策提供一种新的思路,亦有助于政府和煤矿企业科学地明确安全投入方向,降低人因事故率,提高煤矿生产的安全水平。     

基于加速度干扰和AHP的车辆行驶安全性评价模型

关于行驶中的车辆在交通系统各因素作用下的行驶安全性评价,在现有交通系统四大要素的基础上加入车辆行驶状态,构成"人-车-环境-路-车辆行驶状态"5要素。并对各要素评价指标的选定做了细致的筛选,建立了车辆行驶安全性评价指标体系。其中"人-车-环境-路"因素采用打分的形式确定其参数的分值,并利用层次分析法(AHP)计算各参数权重来构建模型的;"车辆行驶状态"因素则是引入加速度干扰的定义,建立基于道路结构的加速度干扰模型。最后,运用层级分析法建立了总的车辆行驶安全评价模型。     

基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。     

Analysis of the nitrifying bacterial community in BioCube sponge media using fluorescent in situ hybridization (FISH) and microelectrodes

There is growing interest in the development of more cost-effective and retrofit technologies for the upgrade and expansion of existing wastewater treatment plants with extreme space constraints. A free-floating sponge media (BioCube) process, using a 24L lab scale reactor, was operated to study the nitrification profiles and microbial community. The COD removal efficiencies were maintained, at an average of 95%, with the mixed liquor suspended solids (MLSS) inside the BioCube sponge media maintained at 12,688mg/L. The nitrification removal efficiencies were between 92% and 100%, with an average value of 99%. From the results of microelectrode measurements, the ammonium ion concentration was found to rapidly decrease from the surface of the BioCube sponge media to a depth of 2mm due to chemical reactions carried out by ammonia oxidizing bacteria (AOB) species. Multi-fluorescence in situ hybridization (FISH) has been used to investigate the spatial distributions of various microbial activities within reactors. Microbial communities were targeted using different oligonucleotide probes specific to AOB and nitrite oxidizing bacteria (NOB). There were a large number of AOB populations, but these were not uniformly distributed in the biofilm compared to the NOB populations.     

Anticipated Performance Index of some tree species considered for green belt development in and around an urban area: a case study of Varanasi city, India

It is well established that trees help to reduce air pollution, and there is a growing impetus for green belt expansion in urban areas. Identification of suitable plant species for green belts is very important. In the present study, the Air Pollution Tolerance Index (APTI) of many plant species has been evaluated by analyzing important biochemical parameters. The Anticipated Performance Index (API) of these plant species was also calculated by considering their APTI values together with other socio-economic and biological parameters. Based on these two indices, the most suitable plant species for green belt development in urban areas were identified and recommended for long-term air pollution management.     

Source identification and characterization of the accumulating non-biodegradable organics in Korean reservoirs

An increase in the chemical oxygen demand (COD) has been noticed in most Korean reservoirs. Therefore, this research systematically investigated the causes of organic accumulation. Samples of soil affecting the quality of water of reservoirs were collected at various sources and analyzed for their organic characteristics. The COD to biochemical oxygen demand (BOD) ratio was used as the key parameter in the evaluation of non-biodegradable (NBD) organic accumulation in the reservoirs. Soil samples containing plant roots were agitated, with the supernatant showing COD/BOD ratios of less than 2.8, while those of the composted tree leaves were greater than 5.0, suggesting that humic substances produced in forest areas are a major cause of NBD organic accumulation in reservoirs. In addition, the organic fractionation of the leachate from leaching tests showed that of the various types of hydrophobic natural organic matter (NOM), the larger molecular weight humic acid makes a greater contribution than fulvic acid to the increase in the NBD COD in Korean reservoirs.     

Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.