基于正交试验的谷物粉尘燃烧特性影响因素研究

为了研究谷物粉尘燃烧特性影响因素，以可食用玉米淀粉为研究对象，通过ZY6243锥形量热仪（CONE）进行了单因素和正交试验，研究了粉尘粒径、惰性介质CaCO3质量分数、热辐射通量对玉米淀粉燃烧特性的影响效应。应用直观分析法和方差分析法定性地研究了各因素对玉米淀粉热释放速率峰值的影响程度并进行了排序，2种方法得出的结论基本一致。研究结果表明:各因素对玉米淀粉热释放速率峰值的影响程度依次为:CaCO3质量分数＞粉尘粒径＞热辐射通量；其中惰性介质CaCO3对热释放速率峰值和引燃时间的影响最为显著。     

淀粉/凹凸棒粘土复合吸附絮凝材料的研究

采用接枝聚合法在硅烷化凹凸棒粘土(OATP)表面接枝淀粉,制备淀粉/凹凸棒粘土(ATP)复合吸附絮凝材料.采用傅里叶变换红外光谱(FT-IR)、扫描电子显微镜(SEM)对淀粉/ATP进行了表征,并对其制备条件进行了优化.结果表明,当淀粉质量分数(相对OATP质量)为100%,聚合反应时间为3 h,引发剂质量分数为0.003%,反应温度为60℃时,制备的淀粉/ATP对镉离子的最大吸附容量可达到36.78 mg/g.与ATP、OATP相比,淀粉/ATP对镉离子的吸附容量增大了2倍以上.复合材料具有比OATP更强的捕获能力,所形成的絮凝体大而密实,比淀粉絮凝剂具有更好的沉降性能.     

马铃薯加工项目废水处理技术的研究

马铃薯加工项目产生的废水主要是高浓度有机废水,本文研究了通过采用气浮分离/UASB/SBR处理工艺处理此废水。经处理后,各污染物指标达到《淀粉工业水污染物排放标准》(GB 25461-2010)表2间接排放限值后排放城市污水处理厂。     

AJIC工艺处理木薯加工废水研究

采用AJIC工艺对木薯淀粉、变性淀粉、木薯酒精生产废水进行综合处理。结果表明:COD、BOD5和SS的去除率均高达99%,进水水质指标及水量处理后的废水水质可达到《农田灌溉水质标准》(GB 5084-2005)水作标准,符合国控重点污染源污染减排要求。此外,该工艺还同时实现对木薯废渣和污泥进行处理,可生产沼气595.2万立方米/年,有机肥400吨/年,实现直接经济效益422.9万元/年,具有较高的经济、环境和社会效益。     

聚乳酸/淀粉固体缓释碳源生物反硝化研究

以被硝酸盐氮污染的地下水为研究对象,利用共混/熔融聚合技术将聚乳酸和淀粉混合,制备成兼具碳源和生物载体的缓释碳.并考察不同质量比(聚乳酸∶淀粉为8∶2、7∶3、6∶4、5∶5)的缓释碳在反硝化间歇试验中硝氮、亚硝氮和COD的去除效果,结果表明,当聚乳酸/淀粉质量比为5∶5的缓释碳,其反硝化效果最佳,硝氮去除率达99%;以该比例的缓释碳进行反硝化填充柱连续动态试验时,反应器中反硝化效果显著,出水硝氮浓度在2 mg·L-1以下,为开发环境友好的可控性缓释碳源提供了科学依据.     

不同碳源对微生物修复石油污染土壤的促进作用

为解决石油污染土壤中以石油为唯一碳源的土著微生物生长缓慢的问题,研究了分别添加玉米淀粉、玉米粉、可溶性淀粉和葡萄糖4种碳源对土样细菌总量和石油烃降解率的影响。研究结果表明：玉米淀粉作为碳源时土样TN和TP的下降幅度均最大;添加玉米淀粉和玉米粉比添加可溶性淀粉和葡萄糖更有利于细菌的生长繁殖;细菌对直链烷烃化合物均具有较好的降解效果,但对较为复杂的芳香烃化合物降解效果较差。降解反应第40天时,分别添加玉米淀粉、玉米粉、可溶性淀粉和葡萄糖的石油烃降解率分别为67.25%、48.60%、46.30%和28.57%。     

Modification of Aliphatic Polyesters and Their Reactive Blends with Starch

Modified polycaprolactone was synthesized by melt reaction of PCL and reactive monomers such as glycidyl methacrylate (GMA) and maleic anhydride (MAH) in the presence of benzoyl peroxide in Brabender mixer. MAH showed a different grafting phenomenon compared to GMA. The reaction mechanism was discussed with different reactive monomers. Reactive blends of the PCL-g-GMA and the gelatinized starch with glycerin were prepared and their mechanical properties and biodegradabilities were investigated. Reactive blends of PCL-g-GMA and starch showed well-dispersed starch domain in the matrix and better mechanical strength than the unmodified PCL/starch blend. However, the reaction between PCL-g-GMA and starch induced a crosslinking during the reactive blending and this crosslinking in the blend lowered the biodegradation of the blend during the composting test. The biodegradability was investigated by the weight loss and surface morphology change of the blend in the composting medium.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Liquid crystallinity of levan/water/starch solutions

Transmitted light measurements performed with a UV-visible spectrophotometer were used to characterize how starch affects the position of boundaries on the phase diagram for dilute aqueous solutions of levan (a branched polymer of fructose). Data were collected in the range 15 to 70°C; the minimum concentrations required for separation of a nematic phase and the minimum concentration required for a fully nematic solution were identified within this range. While hard interactions (repulsion between rod-like molecular segments) dictate the formation of a liquid crystalline phase at and above ambient temperature in the absence of starch, soft interactions become more significant as solutions are cooled toward ambient when starch is present. Small amounts of starch might be used as a filler to modify the mechanical properties (while retaining the process-related benefits) of levan films cast from liquid crystalline solution.     

延安新造贫瘠耕地适生农作物及其高产品种筛选

2013?—?2017年延安市实施了治沟造地工程,总投资约50亿,新造耕地3.33万hm2,但是研究发现新造耕地土壤贫瘠,改良需要较长时间.因此筛选新造耕地适生农作物及其高产品种,指导农业生产实践显得尤为重要和迫切.为此,本研究开展延安新造耕地适生农作物筛选实验,发现马铃薯为新造耕地适生农业作物,进而从甘肃等地选择有代...