生物质慢速热解工艺的新探讨

慢速热解作为生物质气流床气化的前处理工艺在国内为首创。慢速热解方法不仅可以脱除生物质内的氧元素提高能量密度,而且可以改变生物质的物性有效解决生物质气流床气化过程的输送问题。文章分析了不同生物质种类热解后固体产物、液体产物和气体产物的特性,并且粗略衡算了热解过程的吸热量。结果表明:在热解温度<500℃时,液体产物和气体产物的热值随着热解温度的升高而增加;为得到高固体产率和能量产率的半焦作为气化原料,热解温度不宜>500℃;从能量衡算角度分析而得,热解过程的吸热量很少。     

华北地区大气细颗粒物(PM2.5)年际变化及其对土地利用/覆被变化的响应

大气细颗粒物(PM_2.5)是大气污染的重要组成成分,对其影响因素进度探讨具有重要的意义.但目前来看,多数的研究都聚焦于PM_2.5与气象要素以及经济因素之间的关系,分析土地利用/覆被变化对PM_2.5影响的研究相对较少,需要进一步的深入探讨.基于PM_2.5空间分布数据及土地利用/覆被数据,对华北地区PM_2.5变化特征及土地利用/覆被变化特征进行了系统分析,并利用地理加权回归、GIS空间分析等手段探讨了PM_2.5变化与土地利用/覆被变化的响应关系,结果表明:①华北地区PM_2.5浓度整体呈现东南高、西北低的空间格局,且18a均保持这一态势没有变化.时间上来看,在2006年达到污染最大值,之后虽有波动但一直居高不下.多数城市PM_2.5浓度超标,整体环境污染形势严峻;②2000～2015年研究区土地利用类型/覆被以耕地、林地和草地为主,土地利用/覆被变化趋势主要表现为耕地的大量减少以及建设用地的持续增加,水域和未利用地面积略...     

上海市土壤氟含量风险管控限值探讨

受工业活动影响,上海市典型工业区表层土壤氟中位值普遍高于"七五"背景值.针对工业企业场地土壤氟化物高值现象,目前仍缺乏相关的管理标准体系,且基于总量的评估分析方法已无法满足日益增长的精细化管理需求.详细梳理了国内外氟化物相关标准体系,并对上海市土壤氟限值进行了探讨.基于上海市典型工业场地特征参数计算得到的土壤氟化物筛选...     

测定总氮的影响因素探讨

针对水质中总氮测定时蒸馏水、消解剂和消化过程等影响因素进行了讨论,并提出了减小空白值的对策。     

基于计算模拟与响应面分析漆酶对己烯雌酚的降解作用

己烯雌酚(Diethylstilbestrol,DES)作为水环境中最具雌激素活性的合成化合物之一,其给生物体和环境带来的危害已经引起人们的关注.本研究首先通过分子对接与分子动力学模拟从理论上分析漆酶与DES的相互作用;其次通过实验分析其降解动力学模型及不同反应条件和介质对漆酶催化转化DES的影响;最后使用响应面分析方法优化漆酶-ABTS系统催化转化DES的最佳条件.计算结果表明,漆酶与DES的反应能够自发进行且它们之间主要存在氢键和疏水作用力.实验结果表明,反应6 h左右,50 mg·L^-1的DES的降解率达到93%以上;根据Michaelis-Menten模型得到的动力学参数K_m和V_max分别为36.18 mg·L^-1和45.98 mg·L^-1·h^-1,模型的R²为0.99.漆酶催化降解DES的最佳pH为6,最佳温度为55℃.几种介质中,ABTS对漆酶催化降解DES的作用最强.通过响应面分析发现,在pH=5.5、55.98℃、1....     

珠三角地区造纸行业排水中二 NFDA1 英(PCDD/Fs)特征分析

研究采用¹³C同位素内标稀释定量法,高分辨气相色谱质谱法(HRGC-HRMS)对珠三角地区造纸行业排水中PCDD/Fs特征进行了分析。结果表明,该地区造纸行业PCDD/Fs含量为:4.75~80.05 pg/L,且以OCDD占主导地位;同时该类行业PCDD/Fs的TEQ为:0.21~2.02 pg TEQ/L。最后通过对该类行业排水中PCDD/Fs的TEQ年排放量进行讨论,其结果为0.30~12.97 mg TEQ,且年平均排放量(4.42 mgTEQ)只占我国造纸行业TEQ总排放量的很小一部分。     

典型水源地地下水污染风险评价

地下水污染是由含水层本身的脆弱性与人类活动产生的污染负荷造成的。污染物的荷载可以控制或改变,但是含水层的敏感性是本质的、天然的特性。污染风险不仅取决于相对稳定、不宜改变的含水层天然特征,还取决于主观的污染活动。因此,从地下水天然防污性能、地下水污染源荷载以及地下水社会效益3个方面评价了典型水源地地下水受污染的风险。     

Selective effects of fenitrothion on murine splenic T-lymphocyte populations and cytokine/granzyme production

The aim of this study was to investigate in vitro effects of fenitrothion (FNT) on mouse splenic lymphocytes. Here, naïve mice had their spleens harvested and splenocytes isolated. After exposure to FNT for 48 hr: splenocyte viability was measured using a tetrazolium dye assay; cell phenotypes, i.e., B-cells (CD19⁺), T-cells (CD3⁺), and T-cell subsets (CD4⁺ and CD8⁺), were quantified by flow cytometry; and, production of cytokines/granzyme-B was assessed via enzyme-linked immunosorbent assay. The ability for FNT to induce oxidative stress in the cells was evaluated by measuring hydroxyl radical (·OH) and malondialdehyde (MDA) production and changes in glutathione peroxidase (GSH-Px) and superoxide dismutase (SOD) activity. The results showed that FNT significantly inhibited splenocyte proliferation, and decreased production of interleukin (IL)-2, interferon gamma, IL-4, and granzyme B, but had no impact on IL-6 production. FNT also selectively decreased splenic T-cell levels but did not induce changes in CD19⁺ B-cells. Further, within the T-cell populations, percentages of CD3⁺, CD4⁺, and CD8⁺ T-cells (particularly CD8⁺ T-cells) were reduced. Lastly, FNT selectively increased MDA and ·OH production and inhibited SOD and GSH-Px activities in the splenic lymphocytes. These findings suggest that, due to oxidative damage, FNT selectively inhibits splenic T-lymphocyte survival and cytokine/granzyme production in vitro.     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

应用概率理论拓宽MPN值的计算与实用性

应用多管法检测大肠菌群细菌数是一种适用各种水样的行之有效的检验方法，但此方法操作繁琐，数据处理较难。本文应用概率理论，推导出多种情况下大肠菌群最可能数ＭＰＮ值计算公式，并编制了方便可靠的ＨＢＧ程序，从而进一步提高了此法的实用价值。