Fe2+EDTA溶液络合-铁还原脱除烟气中NO

提出了“Fe2 螯合剂络合-铁粉还原-酸吸收”回收法脱除烟气中NO的新工艺,重点研究了模拟烟气中O2体积分数对NO络合量的影响,以及铁粉用量、铁粉粒径、搅拌速度对NO脱除效率的影响,确定了最佳的铁粉脱氮工艺条件,并对铁粉和铁屑的脱氮效果进行了比较。结果表明,烟气中O2的体积分数从0%增加到4.2%,NO络合量下降90.2%;NO脱除效率随铁粉用量和反应器搅拌速度的增加而增加,随铁粉粒径的增加而降低;过程的最佳工艺参数为,铁粉用量0.8g,铁粉粒径≤0.077mm,搅拌速度900r·min-1,在此条件下,对O2体积分数为5%的模拟烟气在搅拌反应器中可取得90%以上的NO脱除效率;用铁粉在1台搅拌反应器中取得的NO脱除效率和用铁屑在2个鼓泡反应器串联时所取得的效率相当。     

单体米黄大理石矿粉对小麦产量及各器官重金属含量的影响

采用盆栽法,研究大理石矿粉对小麦产量及对成熟期小麦根、茎叶、果实中重金属含量的影响。结果表明:添加大理石矿粉会显著影响小麦的生长及产量(P<0.05),添加矿粉的量不大于60g/kg时,小麦的结实小穗数、穗粒数、千粒重和产量随添加量的增加而增加,而含量再继续增大时,对小麦产量的促进作用将减弱;低含量的大理石矿粉能缓解Pb、Cu、Zn对小麦的毒害,而高含量的对小麦的影响各异,小麦各器官中重金属Cd、Cr与添加大理石矿粉含量呈显著正相关;重金属对小麦各器官的影响排序,根:Cd>Cr>Pb>Cu>Zn,茎叶:Cd>Cr>Cu>Pb>Zn,果实:Cd>Cr>Pb>Zn>Cu。在大理石开采区应该采取一定的措施,避免大量的大理石矿粉散入周围的耕地。     

Carbon nanotubes-incorporated MIL-88B-Fe as highly efficient Fenton-like catalyst for degradation of organic pollutants

CNTs were incorporated into MIL-88B-Fe to get a new Fenton-like catalyst (C@M). Fe(II) was introduced in C@M to get a fast initiation of Fenton-like reaction. Fe(II) content in C@M was related with oxygen-containing functional groups on CNTs. C@M shows efficient catalytic degradation of pollutants over a wide pH range. Iron-based metal organic frameworks have been verified to be efficient heterogeneous Fenton catalysts due to their open pore channels and highly uniform distribution of metallic centers. In these catalysts, however, the iron element is mainly in the form of Fe(III), which results in a process required to reduce Fe(III) to Fe(II) to initiate Fenton reaction. To address this problem, carbon nanotubes (CNTs) with electron-rich oxygen-functional groups on the surface were incorporated into the metal organic frameworks (MIL-88B-Fe) to improve Fe(II) content for an enhanced Fenton-like performance. The prepared CNT@MIL-88B-Fe (C@M) showed much stronger catalytic ability toward H₂O₂ than MIL-88B-Fe. The pseudo-first-order kinetic constant for phenol degradation by C@M (0.32 min^–1) was about 7 times that of MIL-88B-Fe, and even higher than or comparable to the values of reported heterogeneous Fenton-like catalysts. Moreover, the Fenton-like system could effectively degrade various kinds of refractory organic pollutants and exhibited excellent catalytic activity over a wide pH range (4–9). XPS analysis confirmed that Fe(II) content of the catalyst gradually increased with CNT loadings. Electron spin resonance analysis showed that the signal intensity (•OH) of C@M was much higher than MIL-88B-Fe, which was consistent with the degradation efficiency of pollutants. Furthermore, the Fe(II) content of the catalyst gradually increased along with the oxygen-functional group content of CNTs. The result demonstrated that oxygen-containing functional groups of CNTs have a significant impact on the enhanced catalytic performance of C@M. This study provides a new insight to enhance Fenton reaction by using nanocarbon materials.     

磁粉在一级强化混凝中的试验研究

在一级强化混凝实验的基础上.研究了磁粉的加入对强化混凝沉淀效果的影响,并确定出最佳温度的范围和最佳加药量.通过大量的试验证明了磁粉的加入对混凝沉淀有很强的促进作用,在一定程度上提高了出水的水质.     

A comparative investigation of NdSrCu_(1-x) Co_x O_(4-δ) and Sm_(1.8) Ce_(0.2) Cu_(1-x) Co_x O_(4-δ) (x:0–0.4) for NO decomposition

A series of single-phase T-structured NdSrCu 1-x Co x O 4-δ with oxygen vacancies and T -structured Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ (x: 0–0.4) with oxygen excess were prepared using ultrasound-assisted citric acid complexing method, and characterized by means of techniques such as thermogravimetric analysis and NO temperature-programmed desorption (NO-TPD). The catalytic activities of these materials were evaluated for the decomposition of NO. It was found that the NdSrCu 1-x Co x O 4-δ catalysts were of oxygen vacancies whereas the Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ ones possessed excessive oxygen (i.e., over-stoichiometric oxygen); with a rise in Co doping level, the oxygen vacancy density of NdSrCu 1-x Co x O 4-δ decreased while the over-stoichiometric oxygen amount of Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ increased. The NO-TPD results revealed that NO could be activated much easier over the oxygen-deficient perovskite-like oxides than over the oxygen-excessive perovskite-like oxides, with the NdSrCuO 3.702 catalyst showing the best efficiency in activating NO molecules. Under the conditions of 1.0% NO/helium, 2800 hr -1 , and 600–900°C, the catalytic activity of NO decomposition followed the order of NdSrCuO 3.702 NdSrCu 0.8 Co 0.2 O 3.736 NdSrCu 0.6 Co 0.4 O 3.789 Sm 1.8 Ce 0.2 Cu 0.6 Co 0.4 O 4.187 Sm 1.8 Ce 0.2 Cu 0.8 Co 0.2 O 4.104 Sm 1.8 Ce 0.2 CuO 4.045 , in concord with the sequence of decreasing oxygen vacancy or oxygen excess density. Based on the results, we concluded that the higher oxygen vacancy density and the stronger Cu 3+ /Cu 2+ redox ability of NdSrCu 1-x Co x O 4-δ account for the easier activation of NO and consequently improve the catalytic activity of NO decomposition over the catalysts.     

不同添加剂对铅冶炼污染石灰性土壤的修复及土壤性质的影响研究

探讨了污水处理厂脱水污泥、枯草和磷矿粉对受铅冶炼污染的石灰性土壤(全Pb、Cd、Zn含量分别为2337、21.4、486 mg·kg-1,DTPA提取态Pb、Cd、Zn含量分别为1035、14.5、68.7 mg·kg-1)中重金属的稳定效果及对土壤性质的影响.其中,污泥和枯草均按200 g·kg-1(干重)的用量施用,磷矿粉按n(P)∶n(Pb)=2∶1比例施用,培养80 d.研究结果表明,单独施用污泥可使土壤DTPA-Pb含量降低18.0%(p0.05),并可显著降低土壤pH,增加土壤氮、磷有效性和电导率、DTPA-Cd、DTPA-Zn含量,其中,DTPA-Cd、DTPA-Zn含量增加比例均达到10%以上.单独施用枯草可使土壤DTPA-Pb含量降低10.7%(p0.05),土壤有机质含量增加26.4%(p0.05),对土壤其它性状影响较小.磷矿粉单独施用时对土壤性质影响较小.与污泥单独施用相比,磷矿粉与污泥配合施用时,可使土壤DTPA-Cd含量降低11.9%.     

煤质粉末活性炭自燃和热稳定性分析

针对煤质粉末活性炭最显著的热危险特性——自燃危险性进行试验。采用粉尘层最低着火温度测定系统对煤质粉末活性炭进行自燃试验,测定煤质粉末活性炭的最低着火温度;采用SDT Q600热重分析仪测定煤质粉末活性炭在氮气和空气气氛中以20℃/min的速率升温至700℃时的热解和燃烧特性,通过TG/DTG曲线计算其着火温度,并进行热稳定性评价。粉尘层自燃试验结果表明,煤质粉末活性炭最低着火温度为400℃,具有自燃危险性,易形成阴燃;氮气气氛中热解试验表明,热解过程经历了室温~120.0℃和280.0~700.0℃两次轻缓失重阶段,646.44℃时挥发分热失重速率最大,对应热失重速率峰值为0.082 6%/℃,自燃危险性较低;空气气氛中燃烧试验表明,燃烧过程经历了室温~95.5℃和300.0~600.0℃两次剧烈失重阶段,分别为吸附水分受热蒸发和氧化生成的有机官能团分解脱附导致,565.35℃时挥发分热失重速率最大,对应热失重速率峰值为13.20%/min,粉末较强的氧气吸附效应和较低的导热系数导致其自燃倾向较高,火灾危险性较大。     

铝镁粉加工过程中的清洁生产项目——超细粉回收利用

通过对铝镁粉加工过程中进行的清洁生产审核,实施了超细粉尘回收利用这一典型的清洁生产项目,良好而有效地控制和预防了污染物的产生,实现了环境效益与经济效益有机结合,并取得了很好的效果。     

利用味精厂米渣生产发泡粉和蛋白质灭火剂

将米渣清洗、过滤以除去液化液、糖液,再加水调至130Be,用石灰调为不同pH,在不同时间下进行水解,结果表明当pH为11.5,在蒸气压为0.1MPa条件下,经过3h水解后蛋白质含量最高,可达到6.0%(水解液含量),再过滤、浓缩成为30%的蛋白质液,经过适当配制可成为蛋白质泡沫灭火剂,经过武汉市科威消防材料厂进行灭火测试,结果表明,粘度、沉淀物、发泡倍数、90%火焰控制时间、灭火时间、抗烧时间等指标均达到中华人民共和国公共安全行业标准(GA2191999);将30%的蛋白质液喷雾干燥后,可制备成为食用蛋白质发泡剂。     

加压曝气生物反应器及其工艺设计

介绍了加压曝气生物反应器及其处理系统的工艺设计 ,包括反应器原理、工艺流程、运行参数 ,工艺设计特点等