测控系统及组态软件在危险环境中的应用

为了及时有效地监测与控制危险环境中的易燃易爆危险品,设计并组建了实验室条件下模拟监控应用系统,通过组态软件完成实时监测与控制.对模拟试验中数据处理方法和参数设计也进行了相关研究.     

Response of bioaerosol cells to photocatalytic inactivation with ZnO and TiO2 impregnated onto Perlite and Poraver carriers

•ZnO/Perlite inactivated 72% of bioaerosols in continuous gas phase. •TiO₂ triggered the highest level of cytotoxicity with 95% dead cells onto Poraver. •Inactivation mechanism occurred by membrane damage, morphological changes and lysis. •ZnO/Poraver showed null inactivation of bioaerosols. •Catalysts losses at the outlet of the photoreactor for all systems were negligible. Bioaerosols are airborne microorganisms that cause infectious sickness, respiratory and chronic health issues. They have become a latent threat, particularly in indoor environment. Photocatalysis is a promising process to inactivate completely bioaerosols from air. However, in systems treating a continuous air flow, catalysts can be partially lost in the gaseous effluent. To avoid such phenomenon, supporting materials can be used to fix catalysts. In the present work, four photocatalytic systems using Perlite or Poraver glass beads impregnated with ZnO or TiO₂ were tested. The inactivation mechanism of bioaerosols and the cytotoxic effect of the catalysts to bioaerosols were studied. The plug flow photocatalytic reactor treated a bioaerosol flow of 460×1 0⁶ cells/m³_air with a residence time of 5.7 s. Flow Cytometry (FC) was used to quantify and characterize bioaerosols in terms of dead, injured and live cells. The most efficient system was ZnO/Perlite with 72% inactivation of bioaerosols, maintaining such inactivation during 7.5 h due to the higher water retention capacity of Perlite (2.8 mL/g_Perlite) in comparison with Poraver (1.5 mL/g_Perlite). However, a global balance showed that TiO₂/Poraver system triggered the highest level of cytotoxicity to bioaerosols retained on the support after 96 h with 95% of dead cells. SEM and FC analyses showed that the mechanism of inactivation with ZnO was based on membrane damage, morphological cell changes and cell lysis; whereas only membrane damage and cell lysis were involved with TiO₂. Overall, results highlighted that photocatalytic technologies can completely inactivate bioaerosols in indoor environments.     

混合药物粉尘输运过程静电特性实验研

兽药制药粉尘加工工艺过程中,由于粉尘颗粒之间或颗粒与设备、管壁之间的碰撞、摩擦,导致装置内部静电荷量积聚,激发静电放电,粉尘燃烧或爆炸的事故频发。实验主要通过包括粉尘与管材摩擦的漏电电流测试和静电放电火花对粉尘云点燃敏感性测试两部分。结果表明:单一药物药粉的静电漏电电流随着管材管径的增大,管长的增长,静电漏电电流逐渐变大;随着倾斜角的增大,静电漏电电流先增大后降低;镀锌铁管的漏电电流大于PVC管,电荷逸散速度更快。单一兽药粉的粉尘云放电火花最小点燃能量随质量浓度的变化,呈现二次曲线的变化趋势。混合兽药粉与单一兽药粉的漏电电流和粉尘云放电火花最小点燃能量的测试结果的变化趋势是一致的。     

Validation of the UN test method N.5

Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water.     

轧钢污泥综合利用的技术研究

阐述了一种轧钢污泥的回收处理技术,该技术可把轧钢污泥有效地分离成氧化铁粉和混合油,实现综合利用,减少铁素资源浪费,有良好的经济效益和环境效益.     

大豆蛋白粉喷雾干燥塔尾气余热的回收与利用

针对大豆蛋白粉生产过程中喷雾干燥塔尾气温度较高,有回收利用价值的现实,也针对目前的节能需求,对现有的喷雾干燥塔的尾气排放部分进行改造,设计一个片状空气预热器,以利用高温的尾气与系统的进气做热交换,实现热量再利用,降耗和提高蛋白粉产率的目的,并对投资收益进行了分析。     

从粉煤灰中提取多种微细氧化物的研究

将粉煤灰与Na2CO3按一定的比例混合后焙烧,采用酸碱联合法提取粉煤灰中氧化硅、氧化铝和氧化铁,分析了工艺条件对粉煤灰中氧化物提取率的影响。实验结果表明,从粉煤灰中提取氧化物的最佳条件是:碳酸钠与粉煤灰的比例0.6∶1.0,焙烧温度850℃、盐酸浓度4 mol/L,氢氧化钠浓度2.6 mol/L,浸取时间约6 h。在此条件下得出微细氧化硅、氧化铝、氧化铁的晶体,其平均粒度分别为氧化硅1.107μm,氧化铝1.334μm,氧化铁0.783μm。     

漂白粉用于治理石化企业硫化氢恶臭气体的研究

实验采用填料吸收塔对漂白粉用于石化企业硫化氢恶臭的治理进行了初步研究,系统研究了漂白粉投加量、硫化氢浓度、进气流量、吸收氧化温度、液气比等因素对处理效果的影响。结果表明：室温下,漂白粉投加量为0．2g／100mL,液气比20L／m^3,进气浓度控制在7800mg／m^3以内,调整适宜的进气量,对硫化氢恶臭的去除率可以达到99％以上。漂白粉吸收氧化硫化氢恶臭气体不仅技术可行,而且费用低廉,操作方便,可以进行深入的研究,进行工业化放大。     

摩托车防盗器遥控引燃黑火药的实验研究

根据2013型铁将军牌摩托车防盗器工作原理,分析了连接左转向灯、起动继电器及电门锁的5条导线遥控引燃黑火药的方式.利用GOS-620型示波器,测得防盗器在设防、寻车、起动、振动1次、连续振动、解锁时这5根导线两两之间的电压.从60种组合中筛选出10种可能引燃黑火药的方式.通过引燃实验,验证了这10种引燃方式.以左转向灯...     

La-M-Co-O/堇青石催化剂的制备及催化氧化氯苯

采用柠檬酸络合法制备La-M-Co-O（M=Mn,Cr,Fe,Ni和Cu）/堇青石催化剂,运用BET,XRD,SEM,H₂-TPR和XPS技术对催化剂性能及微观结构进行表征分析,研究考察过渡金属掺杂,掺杂量以及焙烧温度等对催化剂催化氧化性能的影响.结果表明,随着催化剂焙烧温度升高至650℃时,催化剂表面所负载的活性氧化物颗粒最为分散,其氧化活性最佳,且当反应温度为350℃时,催化剂催化氧化氯苯转化率可达96.4%,究其原因是高温焙烧致使催化剂形成LaCoO₃钙钛矿型复合氧化物,其复合氧化物的晶体结构有利于催化剂催化氧化氯苯性能的提高.