东南大陆岩石圈板块地体构造

东南大陆的地质构造模型,具有欧亚大陆边缘向洋增生的独特形式。除外来地体之外,或以扩张、地幔上涌,洋壳向大陆地壳转化,并不断向洋增生;或是大陆分裂,地幔柱——热点物质不断注入变薄和破裂了的地壳,形成区域性新的生长构造层,构造岩浆地质体表现为有独特属性的“A型”花岗岩和流纹岩链。这些高DI值的富硅富碱富钠质岩石,出现在欧亚大陆边缘的重力梯度带上。裂解带的地壳结构模式是上地壳存在着重力不稳定的硅铝低速带;中地壳有洋——陆过渡型地壳的“类裂谷型”结构,P波速度为6.3～6.4km/s的中间壳层;在下地壳下部有速度为7.0～7.4km/s的壳——幔混合型高速层;随着“异常”的上地幔的形成,有大范围的热活动和壳——幔边界穹窿,穹窿的地盖比正常区为为薄。由于化学库和化学边界层的横向不连续,可划分出古老基底和后期地质发展史完全迥异的两个亚板块;和以壳层(或幔层)断裂为边界特点的八个地体;一个以分裂为主,并具热点径迹的最新生长构造层的扩张——裂解构造岩浆地体。     

密切值法在污染源治理方案优选中的应用

本文采用密切值法进行污染源多个治理方案的优化决策研究，并通过实例分析获得了与实际状况相符合的优化结果。     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

入海河流对近岸海域海湾影响分析

利用污染指数法及相关系数法对盘锦市境内的河、海水质进行对比分析，从而得出近岸海域海湾水质主要受入海河流水质影响的结论。     

Pearce型构造岩浆地球化学判别图评述——以玄武岩为例

自从六十年代板块构造的概念诞生以来,人们认识到有必要探讨古地理和古构造重建的方法.一段时期以来,很多学者(如Gilluly,1971)认为,岩浆作用与特定的大地构造环境紧密相关,不同的岩浆类型或火山岩系列产在一定的地壳环境,因而出现了许多运用主要或微量元素资料的分类体系或判别图.基于Irvine和Barager(1971)以及Miyashiro(1973)发表的主要元素图解能用来判别岩浆类型,而Pearce(1976)则介绍     

三维虚拟地理环境构建与应用

可量测三维虚拟地理环境是数字地球应用的基础平台。本文研究了三维虚拟地理环境构建空间几何建模与纹理建模关键技术。提出了一种适用于大规模生产建库的可量测三维虚拟地理环境构建的生产工艺模型和三维虚拟模型数据获取的方法。介绍了三维虚拟地理环境在城市规划、房产经营管理等方面的应用。     

分光光度法测定雨水中微量过氧化氢的研究

本文提出了以钛（ＩＶ） 过氧化氢 ２ （３，５ 二溴 ２ 吡啶偶氮） ５ 二乙氨基苯酚（３，５ ｄｉＢｒ ＰＡＤＡＰ）三元配合物体系光度测定雨水中微量过氧化氢的方法，该方法简便，灵敏度和选择性较高，所得结果令人满意     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]     

多环芳烃的几种理化参数与LC_(50)的相关性研究

对多环芳烃(PAHS)4种理化参数(K;W、Sw。X Vv。)与 LCO的相关关系进行了研究,建立了 4种一元线性回归方程。结果表明,4种参数的相关系数分别为:0.刀66、08083、09488、0.9570,经r检验,后两种属高度显著相关.用所建立的一元线性回归方程对7种PAHS的LC。进行估算,估算值与实测值相比,平均相对误差分别为58.84％、32.23％、1761％、198％,用l和V＊.H对LClj进行估算的估算精度也较高。经比较,提出用(。估算P＊比对麦穗鱼＊CO的新方法。     

曲面零件在拉深过程中内皱时刻及影响因素

进一步推导了曲面零件悬空区上的应力分布及临界失稳公式。然后通过计算机编程 ,求解了临界失稳方程 ,得到了拉深系数、相对锥顶半径、相对圆角半径、材料相对厚度与临界失稳时刻间的关系曲线 ,并对曲线变化的规律进行了分析。