河南省秸秆能源化利用研究

在日益严峻的能源短缺和环境污染的双重压力下,进行秸秆能源化的开发和利用对于河南新型城镇化建设具有重大战略意义.河南秸秆资源丰富,但秸秆能源化利用尚处于初级阶段,利用率非常低,只有健全秸秆收储体系,改进各种秸秆能源化利用方式的技术性能,加强应用和推广,提升秸秆能源化利用的经济效益,加大对秸秆能源化利用相关主体的引导和扶持,提供政策和资金支持,才能为河南秸秆能源化发展提供良好的环境.     

Combined Municipal Solid Waste and biomass system optimization for district energy applications

Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained.     

Determination of specific gravity of municipal solid waste

This investigation was conducted to evaluate experimental determination of specific gravity (G_s) of municipal solid waste (MSW). Water pycnometry, typically used for testing soils was adapted for testing MSW using a large flask with 2000 mL capacity and specimens with 100–350 g masses. Tests were conducted on manufactured waste samples prepared using US waste constituent components; fresh wastes obtained prior and subsequent to compaction at an MSW landfill; and wastes obtained from various depths at the same landfill. Factors that influence specific gravity were investigated including waste particle size, compaction, and combined decomposition and stress history. The measured average specific gravities were 1.377 and 1.530 for as-prepared/uncompacted and compacted manufactured wastes, respectively; 1.072 and 1.258 for uncompacted and compacted fresh wastes, respectively; and 2.201 for old wastes. The average organic content and degree of decomposition were 77.2% and 0%, respectively for fresh wastes and 22.8% and 88.3%, respectively for old wastes. The G_s increased with decreasing particle size, compaction, and increasing waste age. For fresh wastes, reductions in particle size and compaction caused occluded intraparticle pores to be exposed and waste particles to be deformed resulting in increases in specific gravity. For old wastes, the high G_s resulted from loss of biodegradable components that have low G_s as well as potential access to previously occluded pores and deformation of particles due to both degradation processes and applied mechanical stresses. The G_s was correlated to the degree of decomposition with a linear relationship. Unlike soils, the G_s for MSW was not unique, but varied in a landfill environment due both to physical/mechanical processes and biochemical processes. Specific gravity testing is recommended to be conducted not only using representative waste composition, but also using representative compaction, stress, and degradation states.     

甘肃省风力发电现状及发展对策

介绍了甘肃省的风力资源及风力发电的发展现状,重点阐述了白银地区、玉门地区、酒泉瓜州、金昌地区、敦煌地区和武威地区等几个具有代表性地区的风能资源优势及风电建设情况,指出了甘肃省风力发电在技术和政策等方面目前还存在的主要问题,分析了产生这些问题的原因,提出了促进甘肃省风力发电事业发展的对策。     

植被混凝土无侧限抗压强度的室内试验初探

通过对植被混凝土室内试验结果的归纳和分析,研究了水泥掺入比、龄期和浸水条件对植被混凝土无侧限抗压强度的影响。     

压力板仪法测土-水特征曲线试验研究

非饱和土土-水特征曲线(SWCC)表示了土中含水量与吸力之间的关系。针对非饱和土干-湿循环过程中的吸力变化特征,开展试验研究。采用体积压力板仪实现非饱和土的脱湿和吸湿过程。试验成果显示:(1)土-水特征曲线是不稳定的,它与土体含水率的变化路径有关;(2)在干湿循环过程中,相同的基质吸力具有不同的含水量。     

某耗能减震框肢剪力墙转换结构分析

采用复合型铅粘弹性阻尼器对带转换层框肢剪力墙结构的某酒店进行了耗能减震设计,对耗能减震结构和钢支撑结构进行了对比分析,包括反应谱和局部非线性多遇地震作用和罕遇地震作用下的时程分析。结果表明,底部框架结构布置复合型铅粘弹性阻尼器后,在多遇和罕遇地震情况下层间位移能满足《建筑抗震设计规范》要求,并且采用耗能减震结构能优化整体结构,不会对转换层上部结构产生不利的影响,能更好地改善结构的抗震性能。     

UV-B辐射增强对不同大麦品种生理特性的影响

通过大田试验,研究了UV-B辐射增强对不同生育期3个大麦(Hordeum vulgare)品种光合和蒸腾生理特性的影响。试验设对照(自然光)和辐射增强(辐照强度14.4 kJ.m-2.d-1)2个UV-B辐射水平。结果表明,UV-B辐射增强明显抑制大麦光合作用和蒸腾作用。与对照相比,UV-B辐射增强可降低叶片叶绿素含量、气孔导度、净光合速率和蒸腾速率,但对胞间CO2摩尔分数基本没有影响。不同大麦品种对UV-B辐射增强响应的敏感性存在差异,单2号对UV-B辐射增强较为敏感,而苏啤4号较不敏感。     

1994—2008年河南省植被净第一性生产力及其时空变化

基于地理信息系统和卫星遥感技术,利用地面气象数据、遥感数据和土地分类等数据,根据河南省实际植被覆盖和自然地理情况,应用改进的CASA模型估算了1994—2008年间河南省植被净第一性生产力及其时空变化。结果表明：河南省植被净第一性生产力与年均温度的相关性好于植被年净第一性生产力与年降水量和年均太阳辐射之间的相关性,温度是限制河南省植被净第一性生产力的主要因子;15年来河南省植被净第一性生产力呈增加趋势,但不明显;河南省主要植被类型的净第一性生产力从大到小依次为林地、灌丛、耕地、草地、其它植被,它们随时间的变化趋势极为一致。     

模拟酸雨对薇甘菊种子萌发和幼苗生长的影响

薇甘菊是入侵性杂草,已在我国华南地区及云南部分地区造成严重危害。我国华南地区同时也是强酸雨分布区域。采用不同pH值的模拟酸雨对薇甘菊种子及幼苗进行处理,测定其对种子萌发和幼苗生长的影响。测定了不同pH值下薇甘菊幼苗叶绿素含量、丙二醛含量、脯氨酸含量、超氧阴离子产生速率、超氧化物歧化酶和过氧化物酶活性。结果表明,薇甘菊种子具有较强的耐酸能力,pH≥3．5时均能正常萌发,pH≤3．0时不能萌发。不同pH值模拟酸雨对薇甘菊幼苗叶绿素含量影响不显著。随着模拟酸雨pH值下降,超氧阴离子产生速率上升,丙二醛含量、脯氨酸含量、超氧化物歧化酶活性和过氧化物酶活性呈先上升后下降。pH3．5时,丙二醛含量、脯氨酸含量、过氧化物酶活性均达最大值;pH4．0时超氧化物歧化酶活性达最大值。结果表明薇甘菊对华南地区酸雨胁迫表现出适应。