热解技术处理废弃电路板的研究进展

介绍了回收废弃电路板的热分离方法,综述了热解技术在废弃电路板处理中的研究现状及其所具有的优势。阐述了废弃电路板热解产物的资源价值及热解油的分离与提纯的研究现状,讨论了热解技术处理废弃电路板过程中消除剧毒有机溴化合物及HBr回收的研究进展,同时简介了真空热解技术的研究概况,并指出真空热解技术是今后处理废弃电路板的研究方向之一,有广阔的应用前景。     

用废旧电路板热解油制备酚醛树脂

在碳酸钙存在下,采用热解技术将废旧电路板中的树脂转化为富含酚的热解油,然后直接加入甲醛溶液反应制备热解油型酚醛树脂,实现了废旧电路板中树脂的再生,酚醛树脂的性能结构类似于氨催化的酚醛树脂。实验结果表明：在n（甲醛）：n（热解油）为1．8～2．1的条件下,无需外加催化剂,在60,80,90℃下分别反应30min制备的热解油型酚醛树脂的性能最佳,且可满足GB／T14732—93《木材工业胶黏剂用脲醛、酚醛、三氧氰胺甲醛树脂》中层压材料用酚醛树脂产品的相关标准。     

减少氧化沟弯道沉泥的模拟与研究

针对氧化沟弯道水流流态复杂的特点,分析了弯道横向环流和水流流速在弯道重新分布对污泥沉积的影响,对设置偏置导流墙前后的水流流速分布情况进行模拟比较,探讨了偏置导流墙对减少污泥沉积的机理。     

废弃印刷线路板熔融盐气化特性研究

在熔融盐气化炉中进行废弃印刷线路板气化实验,考察了空气当量比对气体产率、气体热值、碳转化率以及气化效率的影响,并对N2气氛下线路板在熔融盐反应器中裂解液体产物通过气质联用仪进行了分析.结果表明,气体产率和碳转化率随着空气当量比增加而增加,空气当量比增加到40%时,气体产率和碳转化率分别达到840 mL·g-1和96%;气体产物热值随着空气当量比增加而减少,气化效率随着空气当量比的增加先增加然后减少,在20%空气当量比气化效率达到最大值94%.液体产物的主要成分为苯酚、2-甲基苯酚、萘等,表明线路板在熔融盐气化炉内的反应过程中,苯环结构上的长链烷烃脂肪烃支链得到脱除,苯基C6H5-O的断裂得到加强,同时发生芳构化反应.     

世界废弃印刷电路板的机械处理技术现状

电子废弃物中废印刷电路板的处置 ,一直是相当复杂的问题。根据废电路板中各种组分的结合方式 ,采用机械方法进行材料的分离 ,是经济适用并与环境相协调的处理手段。本文介绍了废电路板再利用技术中采用的各种机械设备 ,并总结了国外机械处置方法的实践进展。     

配电线路发生火灾事故的原因及预防

介绍了配电线路在运行中发生短路、过负荷以及导线或电缆接头处接触电阻过大而引起导线过热、产生火花和电弧引起火灾事故的原因。并针对上述原因 ,提出安全用电 ,预防配电线路发生火灾事故的安全技术措施     

线路板生产丝印区有机废气的净化

针对电子线路板厂洁净房丝印区有机废气污染的问题,选择间歇式固定床活性炭吸附法净化有机废气的工艺流程,通过制冷能力和吸附量的估算,设计空塔气速为0 . 6m s,吸附剂为果壳活性炭,装填高度为1m ,分双层多个抽屉式填装,运行后,实际监测净化效果明显,苯、甲苯、二甲苯的净化效率分别为81 .5 9% ,83. 5 0 % ,85 . 4 3% ,换下的废活性炭经再生解吸后可循环使用。回收的有机溶剂掺在柴油中作为发电机的燃料。     

废印刷电路板的静电分选实验研究

金属与非金属材料的分离是回收利用废印刷电路板的关键环节。对废印刷电路板物料的静电分选进行了实验研究。实验以电压、辊筒转速、电晕电极与辊筒之间的距离、静电极位置、电晕电极位置、电晕电极数量等为考察因素,研究各因素对电选效果的影响规律。结果表明,影响金属与非金属材料分离的主要因素是电压、辊筒转速和电晕电极与辊筒之间的距离,对于-0.9 0.45mm的破碎物料,当电压为24kV,辊筒转速为15Hz(54.6r/min),电晕电极与辊筒之间的距离为5.2cm时,得到最大静电分选综合效率67.37%。     

An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals

This study refers to two chemical leaching systems for the base and precious metals extraction from waste printed circuit boards (WPCBs); sulfuric acid with hydrogen peroxide have been used for the first group of metals, meantime thiourea with the ferric ion in sulfuric acid medium were employed for the second one. The cementation process with zinc, copper and iron metal powders was attempted for solutions purification. The effects of hydrogen peroxide volume in rapport with sulfuric acid concentration and temperature were evaluated for oxidative leaching process. 2 M H₂SO₄ (98% w/v), 5% H₂O_2, 25 °C, 1/10 S/L ratio and 200 rpm were founded as optimal conditions for Cu extraction. Thiourea acid leaching process, performed on the solid filtrate obtained after three oxidative leaching steps, was carried out with 20 g/L of CS(NH₂)₂, 6 g/L of Fe³⁺, 0.5 M H₂SO₄, The cross-leaching method was applied by reusing of thiourea liquid suspension and immersing 5 g/L of this reagent for each other experiment material of leaching. This procedure has lead to the doubling and, respectively, tripling, of gold and silver concentrations into solution. These results reveal a very efficient, promising and environmental friendly method for WPCBs processing.     

Assessment of toxic metals in waste personal computers

Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in lower levels than the legislative limits.