Batch sorption dynamics and equilibrium for the removal of lead ions from aqueous phase using activated carbon developed from coffee residue activated with zinc chloride

Lignocellulosic materials are good precursors for the production of activated carbon. In this work, coffee residue has been used as raw material in the preparation of powder activated carbon by the method of chemical activation with zinc chloride for the sorption of Pb(II) from dilute aqueous solutions.The influence of impregnation ratio (ZnCl₂/coffee residue) on the physical and chemical properties of the prepared carbons was studied in order to optimize this parameter. The optimum experimental condition for preparing predominantly microporous activated carbons with high pore surface area (890 m²/g) and micropore volume (0.772 cm³/g) is an impregnation ratio of 100%. The developed activated carbon shows substantial capability to sorb lead(II) ions from aqueous solutions and for relative impregnation ratios of 75 and 100%, the maximum uptake is practically the same. Thus, 75% represents the optimal impregnation ratio.Batch experiments were conducted to study the effects of the main parameters such as contact time, initial concentration of Pb(II), solution pH, ionic strength and temperature. The maximum uptake of lead(II) at 25 °C was about 63 mg/g of adsorbent at pH 5.8, initial Pb(II) concentration of 10 mg/L, agitation speed of 200 rpm and ionic strength of 0.005 M. The kinetic data were fitted to the models of pseudo-first order and pseudo-second order, and follow closely the pseudo-second order model. Equilibrium sorption isotherms of Pb(II) were analyzed by the Langmuir, Freundlich and Temkin isotherm models. The Freundlich model gives a better fit than the others.Results from this study suggest that activated carbon produced from coffee residue is an effective adsorbent for the removal of lead from aqueous solutions and that ZnCl₂ is a suitable activating agent for the preparation of high-porosity carbons.     

2,4-D Mineralization in soil profiles of a cultivated hummocky landscape in Manitoba,Canada

The objective of this study was to quantify 2,4-D (2,4-dichlorophenoxyacetic acid) mineralization in soil profiles characteristic of hummocky, calcareous-soil landscapes in western Canada. Twenty-five soil cores (8 cm inner diameter, 50 to 125 cm length) were collected along a 360 m transect running west to east in an agricultural field and then segmented by soil-landscape position (upper slopes, mid slopes, lower slopes and depressions) and soil horizon (A, B, and C horizons). In the A horizon, 2,4-D mineralization commenced instantaneously and the mineralization rate followed first-order kinetics. In both the B and C horizons, 2,4-D mineralization only commenced after a lag period of typically 5 to 7 days and the mineralization rate was biphasic. In the A horizon, 2,4-D mineralization parameters including the first-order mineralization rate constant (k ₁), the growth-linked mineralization rate constant (k ₂) and total 2,4-D mineralization at the end of the experiment at 56 days, were most strongly correlated to parameters describing 2,4-D sorption by soil, but were also adequately correlated to soil organic carbon content, soil pH, and carbonate content. In both B and C horizons, there was no significant correlation between 2,4-D mineralization and 2,4-D sorption parameters, and the correlation between soil properties and 2,4-D mineralization parameters was very poor. The k ₁ significantly decreased in sequence of A horizon (0.113% day^?1) > B horizon (0.024% day^?1) = C horizon (0.026% day^?1) and in each soil horizon was greater than k ₂. Total 2,4-D mineralization at 56 days also significantly decreased in sequence of A horizon (42%) > B horizon (31%) = C horizon (27%). In the A horizon, slope position had little influence on k ₁ or k ₂, except that k ₁ was significantly greater in upper slopes (0.170% day^?1) than in lower slopes (0.080% day^?1). Neither k ₁ nor k ₂ was significantly influenced by slope position in the B or C horizons. Total 2,4-D mineralization at 56 days was not influenced by slope positions in any horizon. Our results suggest that, when predicting 2,4-D transport at the field scale, pesticide fate models should consider the strong differences in 2,4-D mineralization between surface and subsurface horizons. This suggests that 2,4-D mineralization is best predicted using a model that has the ability to describe a range of non-linear mineralization curves. We also conclude that the horizontal variations in 2,4-D mineralization at the field scale will be difficult to consider in predictions of 2,4-D transport at the field scale because, within each horizon, 2,4-D mineralization was highly variable across the twenty-five soil cores, and this variability was poorly correlated to soil properties or soil-landscape position.     

厌氧氨氧化ASBR中亚硝氮和氨氮降解规律研究

采用生物膜ASBR反应器,研究了厌氧氨氧化反应过程中亚硝氮与氨氮降解速度的变化规律。结果表明,降解过程主要分为2个阶段:速度上升期(0~30 min)和速度下降期(30~150 min)。一阶指数衰减模型的模拟结果表明,20 min以后亚硝氮、氨氮降解速度逐渐减少,亚硝氮降解速度始终高于氨氮降解速度,但是两者差值随时间逐渐减少。     

Rising recreancy: flood control and community relocation in Houston,TX, from an environmental justice perspective

This article looks at issues of recreancy, environmental justice, and relocation as they relate to a flood control infrastructure project in inner city Houston. The main research questions were “What forms would recreancy take?” and “Can a project be environmentally just if recreancy is present?” Through the structural coding of 53 semi-structured interviews, recreancy was found even in a project where the sponsors used community cohesion as a guideline. This article illuminates the difficulties flood control project engineers face when working in local communities and argues that engineering issues are also social issues. Further, the relocatees within this flood control project voice some of the same concerns experienced by people relocated in other involuntary infrastructure development projects. The case outlined in this article could be used to better help those involuntarily relocated for flood control.     

Utilitarian killing,replacement, and rights

The ethical theory underlying much of our treatment of animals in agriculture and research is the moral agency view. It is assumed that only moral agents, or persons, are worthy of maximal moral significance, and that farm and laboratory animals are not moral agents. However, this view also excludes human non-persons from the moral community. Utilitarianism, which bids us maximize the amount of good (utility) in the world, is an alternative ethical theory. Although it has many merits, including impartiality and the extension of moral concern to all sentient beings, it also appears to have many morally unacceptable implications. In particular, it appears to sanction the killing of innocents when utility would be maximized, including cases in which we would deliberately kill and replace a being, as we typically do to animals on farms and in laboratories. I consider a number of ingenious recent attempts by utilitarians to defeat the killing and replaceability arguments, including the attempt to make a place for genuine moral rights within a utilitarian framework. I conclude that utilitarians cannot escape the killing and replaceability objections. Those who reject the restrictive moral agency view and find they cannot accept utilitarianism's unsavory implications must look to a different ethical theory to guide their treatment of humans and non-humans.     

THE REGULATED RIPARIAN VERSION OF THE ASCE MODEL WATER CODE: THE THIRD WAY TO ALLOCATE WATER1

ABSTRACT: Lawyers, engineers, and hydrologists are accustomed to thinking of water law as falling into one of two incompatible models: riparian rights (under which water is allocated by courts according to the relative reasonableness of the competing uses) and appropriative rights (under which water is allocated according to the temporal priority of the competing uses, largely by the action of the water users themselves but perfected by the issuance of an administrative permit). Usually unnoticed is the existence of a third approach, which I have dubbed “regulated riparianism.” Under regulated riparianism, water is allocated by water permits issued after an administrative determination of the reasonableness of the proposed use before the use is commenced. This system, now in place in about half of the states east of Kansas City (plus Hawaii), thus is fundamentally different from either the traditional ripanan rights that it replaces or the appropriative rights found in western states.     

Normality of Hydrological Data1

ABSTRACT: Assessment of normality of hydrological data has been based upon subjective judgments. This paper aims to provide an objective method for such an assessment by introducing three computationally simple statistical tests. Application to some stream flow data indicates that (1) for annual values, at least one of the three sequences- original, square root, and logarithmic - can be considered to be normally distributed; and (2) most monthly stream flows are skew and neither the square root nor the logarithmic transformation is able to render their sequences in all the 12 months normal.     

25 years of higher‐order confirmatory factor analysis in the organizational sciences: A critical review and development of reporting recommendations

We discuss how confirmatory factor analysis results should be used to examine potential higher‐order constructs and advocate that researchers present five types of evidence, which are as follows: (1) the ability of the higher‐order model to reproduce the observed covariation among manifest variables; (2) the ability of the higher‐order model to reproduce the observed covariation among manifest variables better than more parsimonious alternative models—and no less well than less parsimonious alternative models; (3) the ability of the higher‐order model to reproduce the observed covariation among lower‐order factors; (4) the ability of the higher‐order factor to explain variation in lower‐order factors; and (5) the ability of the higher‐order factor to explain variation in manifest variables. We illustrate how this type of evidence could be presented with a worked example and contrast our recommendations with the manner in which higher‐order confirmatory factor analysis has been used in the organizational sciences over the past 25 years to support claims regarding higher‐order constructs such as core self‐evaluations and transformational leadership. Our review shows that a substantial proportion of the 44 examined articles failed to present enough evidence to allow readers to understand the size and importance of higher‐order factors. Copyright © 2015 John Wiley & Sons, Ltd.     

基于序关系法和熵值法的机场安全管理能力综合评价

为了客观科学地评价机场安全管理能力,研究了机场系统构成和安全管理概况,参考民航规章和专家咨询意见,确定安全管理能力的影响因素,建立了由4个准则层和23个具体指标组成的机场安全管理能力评价指标体系,结合实地调研结果及专家意见确定了各指标的测评方法和评分标准。根据序关系分析法和熵值法的特点,参考其他文献,提出了序关系分析法和熵值法相结合的、一种基于方差最大化的主客观赋权法来确定指标权重,构建了机场安全管理能力线性评价模型。结果表明,不同安全管理能力二级指标的变化对安全管理能力的影响程度不同,其综合权重大小降序排列为组织管理能力、人员安全能力、设备运行能力、环境保障能力。以长沙黄花国际机场为例进行评价,评价结果显示该模型具有可行性,能为机场安全管理工作提供参考。     

Dynamic behaviour of direct spring loaded pressure relief valves in gas service: II reduced order modelling

A previous study of gas-service direct-spring pressure relief valves connected to a tank via a straight pipe is continued by deriving a reduced-order model for predicting oscillatory instabilities such as valve flutter and chatter. The reduction process uses collocation to take into account a finite number N of acoustic pressure waves within the pipe, resulting in a set of 2N+3 ordinary differential equations. Following a novel non-dimensionalization, it is shown analytically that the model can exhibit, at experimentally realistic parameter values, instabilities associated with coupling between the valve and acoustic waves in the pipe. The thresholds for each instability are such that for a given flow rate, the first mode to go unstable as the inlet pipe length increases is the quarter-wave mode, then a three-quarter wave, a 5/4-wave etc. Thus the primary mode of instability should always be due to the quarter wave. In the limit of low flow rates, a simple approximate expression is found for the quarter-wave instability threshold in the form of inlet pipe length against mass flow rate. This threshold curve is found to agree well with simulation of the full model. For higher flow rates there is a need to include fluid convection, inlet pressure loss and pipe friction in order to get good agreement. The reduced model enables the dependence of the stability curve on key dimensionless physical parameters to be readily computed.