Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

大学生沉溺网络透析及防范措施

因沉溺网上聊天、交友、玩游戏、看色情而影响大学生学习、生活、身体健康,以致诱发犯罪的问题如洪水猛兽席卷而来.防止大学生沉溺网络,走向犯罪是当前社会、学校、家庭不容忽视的问题.立法、执法、管理、教育应形成合力.     

再燃法烟气脱硝技术

综述了再燃法烟气脱硝技术及其主要影响因素。通过对几种脱硝技术的分析比较，认为再燃脱硝是一种很有前景的脱硝技术，其投资和运行费用界于低NO。燃烧器和选择性催化还原技术之间，有喷氨条件下的先进再燃脱硝效率接近于选择性催化还原技术。总结了国内外对先进再燃脱硝技术各种参数影响条件的研究结果，并论述了该技术的应用要点。     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

The Water Fluxes of the Yellow River to the Sea in the Past 50 Years, in Response to Climate Change and Human Activities

Since the 1970s, the water fluxes to the sea of the Yellow River have declined significantly. Based on data of precipitation, air temperature, the measured and “natural” river flow, the water diversion and consumption, and the areas of erosion and sediment control measures over the drainage basin, water fluxes to the sea of the Yellow River are studied in relation with the influences of changing climate and human activities. The Yellow River basin can be divided into different water source areas; multiple regression indicates that the variation in precipitation over different water source areas has different effect on water fluxes to the sea. In the period between 1970 and 1997, averaged air temperature over the whole Yellow River increased by about 1.0°C, from 16.5°C to 17.5°C, a factor that is negatively correlated with the water yield of the Yellow River. Water diversion and consumption has sharply increased and resulted in a significant decline in the water fluxes to the sea. Since the 1960s, erosion and sediment control measures have been practiced over the drainage basin. This factor, to a lesser degree, is also responsible for the decrease in water fluxes to the sea. A multiple regression equation has been established to estimate the change in water fluxes to the sea caused by the changes in precipitation, air temperature, water diversion and consumption, erosion, and sediment control measures, indicating that the contribution of water diversion and consumption to the variation in annual water flux to the sea is 41.3%, that of precipitation is 40.8%, that of temperature is 11.4%, and that of erosion and sediment control measures is 6.5%.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.     

Computing sustainable manufacturing index with fuzzy analytic hierarchy process

The growing industrial interest in adopting sustainability programmes has ushered in studies regarding sustainability indicators which have continually flourished in current literature. However, limited attention is given to the development of priority ranking, which is an important input for any adopting firm. This paper presents a hybrid multi-criteria approach in determining priority areas in sustainable manufacturing (SM). Using fuzzy analytic hierarchy process to address uncertainty in hierarchical decision-making, this paper determines SM priority strategies and eventually identifies even lower level strategies. The computed sustainable manufacturing index is presented at both the organizational and operational levels for a real case study of an industrial plastic manufacturing firm. This work provides a detailed and transparent hierarchical decision-making approach based on SM framework, the use of which could be valuable to practicing managers across industries in their pursuit of greater sustainability.     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

How effective are River Basin Management Plans in reaching the nutrient load reduction targets?

Riverine nutrient loads are among the major causes of eutrophication of the Baltic Sea. This study applied the Soil & Water Assessment Tool (SWAT) in three catchments flowing to the Baltic Sea, namely Vantaanjoki (Finland), Fyrisån (Sweden), and Słupia (Poland), to simulate the effectiveness of nutrient control measures included in the EU’s Water Framework Directive River Basin Management Plans (RBMPs). Moreover, we identified similar, coastal, middle-sized catchments to which conclusions from this study could be applicable. The first modelling scenario based on extrapolation of the existing trends affected the modelled nutrient loads by less than 5%. In the second scenario, measures included in RBMPs showed variable effectiveness, ranging from negligible for Słupia to 28% total P load reduction in Vantaanjoki. Adding spatially targeted measures to RBMPs (third scenario) would considerably improve their effectiveness in all three catchments for both total N and P, suggesting a need to adopt targeting more widely in the Baltic Sea countries.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01393-x) contains supplementary material, which is available to authorized users.     

容积负荷对ABR-MBR工艺反硝化除磷性能的影响

采用连续流ABR-MBR组合工艺处理生活污水,研究不同容积负荷(volume loading rate,VLR)对该工艺反硝化除磷性能的影响,获得最佳工艺参数.试验考察ABR进水容积负荷(以COD计,下同)分别为0.76、1.01、1.51和2.27 kg·(m~3·d)~(-1)时系统去碳脱氮除磷的性能,并在各ABR容积负荷条件下考察MBR容积负荷对MBR反应器硝化性能的影响.结果表明,在ABR进水容积负荷为1.51 kg·(m~3·d)~(-1)的条件下,系统A2隔室COD去除量最大,并在MBR容积负荷为0.462 kg·(m~3·d)~(-1)时,MBR反应器中实现了短程硝化,系统NH_4~+-N和TN去除率分别达到90%和72%以上,厌氧释磷量为7.41 mg·L~(-1),缺氧吸磷量达到15.42 mg·L~(-1),出水PO_4~(3-)-P浓度低于0.5 mg·L~(-1),这表明短程硝化更有利于强化ABR-MBR系统的反硝化除磷性能.