The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Experimental investigation of a 250-kW turbine organic Rankine cycle system for low-grade waste heat recovery

An organic Rankine cycle (ORC) is generally used for converting low-grade heat into electricity. In this study, an extensive literature survey was conducted to identify current research gaps on experimental ORC systems. Specifically, there is limited experimental data and limited details on thermal and expander efficiencies of ORC systems. In order to address these gaps, the objective of this study included developing a turbine ORC with a power output exceeding 50 kW and thermal efficiency exceeding 8% for a heat source temperature < 120°C. The experimental results indicated that the system achieved a net power output of 242.5 kW and a thermal efficiency of 8.3% (the highest value for a turbine ORC system for the heat source temperature below 120°C). Thus, the study addressed the gaps identified in the research area of ORCs.     

Latent effects of early life stage exposure to triclosan on survival in fathead minnows,Pimephales promelas

The objective of this study was to evaluate the effects of early life stage triclosan (5-chloro-2-(2,4, dichlorophenoxy)phenol, TCS) exposure on hatching, development, and survival in the fathead minnow, Pimephales promelas. Embryonic minnows were exposed to TCS (50 and 100 µg L^?1) for 10 days followed by 6 weeks depuration. Mortality and morphological deformities were recorded and quantified during exposure and at the end of depuration. No significant effects on embryonic survival, time to reach the eyed stage, or hatching were found. However, at the conclusion of the depuration period, survival was significantly reduced in TCS exposed fish depending on the concentration. Visual inspection of the exposed fish suggests that mortality is related to spinal deformities, emaciation, and reduced foraging ability. Triclosan exhibits deleterious effects in fish at lower concentrations over longer durations than previously reported. Further, mortality in exposed fish 6 weeks after exposure demonstrates the need for various exposure assays to evaluate effects of TCS.     

基于LCA的废旧资源循环利用节能减排效果评估模式与方法研究——以吉林省某钢铁企业为例

促进废旧资源循环利用是加快推进我国生态文明建设,完成节能减排目标的必然选择。本文基于生命周期评价模式,从微观企业层面入手,构建产品全生命周期基准流程,引入能量输入与环境输出参数,建立废旧资源循环利用节能减排效果量化核算模型,评估再生产品的节能减排经济成效,并以吉林省某钢铁企业为例,评估"废钢-电炉"短流程和"铁矿石-高炉-转炉"长流程的能源、环境、成本差异,辨识影响废钢再循环节能减排效果的主要因素和重要环节。结果显示,再生钢铁全生命周期与原生钢铁全生命周期相比,节能588.48kgce/t,节能率为84%;主要污染物中SO2减排率最高,达92%;CO2总减排1 180.92 kg/t,减排率为67%;总成本却高出198元/t。其中,炼铁工序的节能量和减碳量最大,烧结工序SO2、NOx和烟(粉)尘减排量最大,焦化工序COD和氨氮减排量最大,回收、加工处理、炼钢环节节能量和减碳量以及SO2、NOx和烟(粉)尘减排量均为负。成本方面,再生钢铁生产成本高于原生钢铁308元/t,虽然再生钢铁由于污染减排可节省56元/t的排污费并获取54元/t的碳交易收益,但都不足以扭转电炉炼钢费用较高的现状。因此,国家应在电炉炼钢方面给予钢企及相关企业适当的财税扶持政策,在电价方面给予钢企一定的优惠或补贴,并完善废钢回收加工体系等,以促进废钢循环利用。基于LCA的废旧资源循环利用节能减排效果评估可以实现对产品生命周期全过程的资源、环境、成本的优化管理。     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.     

模拟车用工况下5kW燃料电池尾气净化系统

模拟了车用工况下燃料电池发动机脉冲式排氢的特点,设计开发了一套质子交换膜燃料电池的尾气净化系统,并以5 kW燃料电池的尾气排放为例,研究其净化效果。研究了电池阳极排放氢气缓冲前后尾气中氢气浓度的变化,以及不同空速条件下氢气的去除效果。结果表明：电堆阳极排放氢气经过缓冲处理后,尾气中氢气浓度趋于平稳,大部分工况下处在2%以下,达到了安全处理的要求;尾气中氢气的去除效果与空速密切相关。对自制的整体式催化剂而言,当空速低于20000 h^-1时,氢气的去除率能达到约95%,而当空速达到39270 h^-1时,氢气的去除率仅为10.9%。鉴于这一问题,提出通过采用尾排空气的分流手段调整催化燃烧反应器对空速的要求,以提高尾气中氢气的去除率。     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

Spatial identification by satellite imagery of the crop–fallow rotation cycle in northern Laos

In the mountainous regions of northern Laos, shifting cultivation, or slash-and-burn agriculture, is widely practiced. However, the crop–fallow rotation cycle is becoming shorter owing to forest conservation policies and population pressure, causing loss of productivity that deleteriously affects farmers’ livelihoods in the region. To investigate regional land use conditions, we have developed a method of identifying the crop–fallow rotation cycle from Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper+ (ETM+) data. We assessed the impact of the identified cycle on plant production measured by Normalized Difference Vegetation Index (NDVI). The study site was an area in Luang Prabang Province. Using eight TM and ETM+ images acquired annually from 1995 to 2003, except for 1998, when cloud-free data were not collected, we classified land use in each year as crop or fallow by the presence of vegetation in the late dry season. Conformity with fallow age determined by field investigation was 69.1%. The cultivation frequency from 1995 to 2002 showed that 77,000 ha (17.3% of the study site) had not been used for cropping during the period, but 41,000 ha (9.2%) had been used every year. Of the study site, 129,000 ha (29.1%) was cultivated one or two times, 83,000 ha (18.7%) was three or four times, and 54,000 ha (12.2%) was five or six times. The NDVI of crops in November did not provide sufficient evidence to prove the assumption that a longer fallow period would result in better crop yields. Instead, the regeneration of fallow vegetation was evidenced by the higher NDVI values after longer fallow. More than 8 years would be needed to reach the same NDVI as forest. From the produced maps indicating fallow age and cultivation frequency, we found that areas with high potential for regeneration decreased as cultivation frequency increased. Areas near rivers were intensively used, and fallow length was accordingly short. Low-potential areas were found in the western basin of the Mekong River. This spatial information can be used to detect areas where biomass productivity is at high risk of deteriorating. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.