利用薄片穿透法确定铝合金最大蚀坑深度

目的研究铝合金最大蚀坑深度与环境试验时间的对应关系,为新型合金服役前的耐蚀性评级和结构件服役过程中的剩余寿命预测提供技术基础。方法利用光学显微镜、扫描电镜分析海洋大气环境中新型铝合金的腐蚀类型,并利用薄片穿透法研究铝合金薄片最大蚀坑深度与试验时间的对应关系。结果经过海洋大气环境暴露试验后,2A97铝合金发生了深入合金内部的严重点蚀,检测薄片试样背面电解液的出现时间,可以确定环境试验中蚀坑穿透薄片试样的时间。通过测量不同厚度薄片试样的穿透时间,可以确定最快生长局部腐蚀点的深度和时间的关系。结论中性盐雾试验环境下,达到相同的最大蚀坑深度,2A97铝合金与AA2024铝合金用时基本相当。     

Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.     

埕岛油田海底管道漏磁检测与安全评估

提出了埕岛油田海底管道内缺陷漏磁检测需解决的主要问题,研发了325 mm管道内缺陷漏磁检测装置,确定了海底管道漏磁检测工艺流程,配套了管道检测发射装置、接受装置等相关设施,实现了海底管道的漏磁检测、缺陷分析和安全评估。     

高含硫气田试气与地面工程建设交叉作业安全管理方法初探

普光气田作为高含硫气田在国内大规模开发,尚属首例,在气田开发过程中没有可借鉴的经验.高含硫气井试气作业中易发生井喷、硫化氢泄漏等事故.普光气田地面工程建设施工难度大、地形复杂,按照工程进度要求,试气作业和地面集输工程施工两项作业交叉时必须实现“安全作业、安全施工”,这是普光气田开发的基本目标.通过制订安全管理制度、明确责任主体、服从业主统一管理等有效的安全管理方法,保证了目标的实现,获得安全管理经验,对今后高含硫气田大规模开发具有指导意义.     

加强危险场所电气安全检测,提高化工企业本质安全水平

针对近年来化工企业电气安全、防静电等事故多发的现状,本文通过对化工企业电气安全、防静电等安全设施存在的问题进行分析,阐述了化工企业电气安全、防静电设施存在的主要缺陷,强调了利用技术支撑手段对在用安全设施进行检测检验对提高企业本质安全水平的重要性,并对如何做好电气安全、防静电等安全设施的检测工作提出了建议。     

Performance-based earthquake evaluation of a full-scale petrochemical piping system

Assessment of seismic vulnerability of industrial petrochemical and oil & gas piping systems can be performed, beyond analytical tools, through experimental testing as well. Along this line, this paper describes an experimental test campaign carried out on a full-scale piping system in order to assess its seismic behaviour. In particular, a typical industrial piping system, containing several critical components, such as elbows, a bolted flange joint and a Tee joint, was tested under different levels of realistic earthquake loading. They corresponded to serviceability and ultimate limit states for support structures as suggested by modern performance-based earthquake engineering standards. The so called hybrid simulation techniques namely, pseudo-dynamic and real time testing with dynamic substructuring, were adopted to perform seismic tests. Experimental results displayed a favourable performance of the piping system and its components; they remained below their yielding, allowable stress and allowable strain limits without any leakage even at the Near Collapse Limit State condition for the support structure. Moreover, the favourable comparison between experimental and numerical results, proved the validity of the proposed hybrid techniques alternative to shaking table tests.     

松散煤体渗流传热试验装置研制

为研究松散煤体低温氧化及通风供氧下的渗流传热规律,研发了渗流传热试验装置。试验装置由气体加湿系统、气体加热系统、煤样反应系统、数据采集系统和安全保护系统组成;本装置可实现自动加湿、控温、自动采集数据及处理数据。为解决装置使用和运行中的安全问题,设计了断电保护、有害气体检测等措施,保障试验装置的安全、可靠。     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

测土配方施肥对油菜生产的影响——基于1 722份田间试验材料的经济学分析

论文基于1 722份田间试验数据,将氮、磷、钾肥的投入量和油菜的产出量分别折算为相应的具体投入值和产出值,首先,运用超越对数生产函数模型计算出各种化肥要素的边际产出,研究发现氮、磷、钾肥的投入对油菜产出值的作用大小存在一定差异,对油菜产出值的影响大小关系为氮肥>磷肥>钾肥,其中氮肥的产出弹性值为0.288 3,磷肥的产出弹性值为0.180 3,钾肥的产出弹性值为0.087 7。其次,继续探究氮、磷、钾肥在油菜生产中的相互关系,结果显示,氮肥替代弹性系数为-0.058 8,磷肥为0.120 9,钾肥为0.281 0。最后,测算出使油菜产出值最大的氮肥最佳投入值为951.20 元/hm²,最佳磷肥投入值为3 766.08 元/hm²,最佳钾肥投入值为621.32 元/hm²。     

立井揭煤前测定煤层瓦斯压力的方法与实践

为了解决复杂环境下立井揭煤前煤层瓦斯压力的可靠测定,基于揭煤井筒瓦斯地质特征、煤岩体物理力学性质,应用COMSOL软件模拟揭煤工作面在接近目标煤层时,井筒周围煤岩的地应力分布特征,直观展现了目标煤层中的应力分布结果。模拟结果表明,立井工作面距煤层的垂直距离为7 m时,煤层中会形成一个近似于环形的卸压圈,卸压半径为16 m,因此煤层瓦斯压力测试孔的终孔位置应布置在井筒中心线16 m以外的原始地应力区,以保证测压点瓦斯压力不受揭煤井筒卸压区的影响,令测压结果准确可靠,从而更好地预测煤与瓦斯突出区域的危险性。同时,结合立井揭煤工作面的水文地质特征和井筒严重淋水情况,自主研发并应用了瓦斯测压孔"两堵一注"封孔材料及特定的封孔工艺,进一步保障了封孔质量和瓦斯压力测试结果的可靠性。最后,依据测压结束时测压管内的实际水压情况,对测压结果进行修正,并依据实测瓦斯含量,采用间接法对所测得的瓦斯压力进行验证,实测值在反算得到的瓦斯压力值域内,表明此方法有效可行。