紫色森林土壤发育特点的研究

本文通过对赤水紫色森林土壤发育特点的研究，总结出划分紫色森林土壤剖面的方法，解决了紫色森林土壤剖面划分不清楚，研究人员之间各自划分的结果不能对比的问题，为进一步研究紫色森林土壤打下了基础。     

Synthesis of Poly(β-hydroxybutyrate) in Simulated Microgravity: An Investigation of Aeration Profiles in Shake Flask and Bioreactor

The microbial strain Azotobacter vinelandii UWD was grown under conditions of simulated microgravity in the National Aeronautics and Space Administration (NASA) Bioreactor. Bacterial growth in simulated microgravity differed significantly from that observed in conventional shake flask experiments: Cells tended to grow in a cluster-like pattern and polymer production started immediately after exposing them to conditions of simulated microgravity, and no lag time was observed. It was imperative to differentiate between the effects derived from microgravity and those imposed by the altered oxygen supply in the bioreactor. Aeration conditions were studied in both reactor types and a gas supply profile was developed for the bioreactor. This supply profile allowed for similar amounts of dissolved oxygen in the bioreactor and the shake flask in the initial stage of the fermentation and, therefore, for an evaluation of the effects of microgravity on biopolyester-producing bacteria. Since the optical density that is conventionally used as a measure for the cell growth could not be used due to the cluster-like growth pattern of the cells, it was determined that bacterial growth behavior in the bioreactor can be monitored through glucose or oxygen consumption.     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.     

River use profile of the Central Niger Delta based on traditional eco-livelihood knowledge (TELK)

The Central Niger Delta is made up of a network of rivers and creeks that constitute the inland surface waters. These surface waters have historically influenced settlement patterns and are of diverse use to residents of the Central Niger Delta. Surface water like many ecological system are complex, whose complexity has been associated with seasonal variability. Traditional knowledge (TK), traditional ecological knowledge (TEK) and the traditional eco-livelihood knowledge (TELK) of residents of four rural communities in the Central Niger Delta have been explored in developing a river use profile of rural communities of the Central Niger Delta. A questionnaire survey has been carried out in four communities, two each from the Otuoke and Kolo Creeks. The result shows that river use varies across seasons and affected by: physico-chemical water quality and characteristics of surface water; the hydrological characteristics; the biological/ecological characteristics; cultural use and demand; need for development projects; and access to this vital resource. Fishing constitute one of the major livelihood source in the Central Niger Delta and the TELK of fishers in the sample communities have specifically been explored to understanding fishing patterns across seasons. The five seasons identified from this study are: flood season; flood recession season; dry season; early rainy season; and rainy season. Therefore, the thesis of this paper is that there is the need to balance the current usage of surface water in the developing world such as the Central Niger Delta with the demand for development as well as future use if development is to meet the criteria for equitable development. The river use profile could be a promising tool in planning for equitable development.

Spatiotemporal dynamics of spring and stream water chemistry in a high-mountain area

The present study deals with the application of the self-organizing map (SOM) technique in the exploration of spatiotemporal dynamics of spring and stream water samples collected in the Chocho?owski Stream Basin located in the Tatra Mountains (Poland). The SOM-based classification helped to uncover relationships between physical and chemical parameters of water samples and factors determining the quality of water in the studied high-mountain area. In the upper part of the Chocho?owski Stream Basin, located on the top of the crystalline core of the Tatras, concentrations of the majority of ionic substances were the lowest due to limited leaching. Significantly higher concentration of ionic substances was detected in spring and stream samples draining sedimentary rocks. The influence of karst-type springs on the quality of stream water was also demonstrated.     

北京市典型溶剂使用行业VOCs成分谱

基于北京市挥发性有机物(VOCs)排放清单和下一阶段VOCs减排的需求,针对汽车整车制造、木质家具制造和出版物印刷这3个主要溶剂使用行业,分别选取典型企业作为研究对象,采用负压法对重点排放环节进行采样,以GC-MS/FID系统测定样品中VOCs组分构成,从而获取了北京市典型溶剂使用行业VOCs成分谱.结果表明,汽车整车制造主要排放环节排放的VOCs组分存在明显差异,色漆涂装工序以含氧VOCs和芳香烃为主,分别占比71. 26%和27. 14%,罩光工序芳香烃达到84. 10%;木质家具制造业不同排放环节的VOCs组分差异不大,均以含氧VOCs和芳香烃为主,分别占55. 08%和18. 98%;出版物印刷业不同排放环节无法单独监测,其混合废气VOCs组分以烷烃和含氧VOCs为主,分别占比47. 29%和44. 57%.     

三峡库区消落带土壤剖面中重金属分布特征

通过对三峡库区消落带土壤的研究,探讨了土壤剖面中重金属的分布特征.结果表明:紫色土淋溶层（A层）w（Cd）和w（Hg）平均值,母质层（C层）w（Cd）,w（Zn）和w（Hg）平均值均高于全国同类、同层次土壤的平均水平;石灰岩土A层及C层的重金属质量分数平均值均低于全国同类、同层次土壤的平均水平.从上游至下游,w（Cu）和w（Zn）平均值呈降低趋势,其他重金属质量分数的变化不明显.城区附近土壤重金属质量分数明显高于其他地区.土壤中w（Cd）,w（Cr）,w（As）,w（Hg）和w（Ni）服从正态分布（Sig.>0.05）,土壤pH与w（Cd）和w（Cu）之间具有正相关关系（显著性水平为0.01）.土壤中w（Cd）与w（Cu）,w（Cd）与w（Ni）,w（Cu）与w（Zn）,w（Cu）与w（Cr）,w（Pb）与w（Zn）,w（Pb）与w（As）,w（Pb）与w（Hg）,w（Pb）与w（Ni）,w（Zn）与w（Ni）和w（Hg）与w（Ni）之间具有一定的正相关关系;w（Cd）与w（Pb）,w（Cd）与w（Zn）,w（Cd）与w（As）,w（Cu）与w（Ni）和w（Hg）与w（Cr）之间具有一定的负相关关系.      

珠江三角洲区域污染分布及其垂直风场特征

基于2014年4月~2015年3月珠江三角洲(珠三角)56个环境监测子站以及9个城市的逐时PM2.5浓度数据,对珠三角地区的颗粒物污染进行了系统聚类分析和相关性分析.结果表明,珠三角地区PM2.5的区域污染可分为3种类区,一为东莞、广州、佛山以及江门(Ⅰ型);二为中山、珠海、深圳、惠州(Ⅱ型);三为肇庆单独为一类(Ⅲ型).其在一年中所出现的天数分别为47、7和128 d.Ⅰ型污染时,除珠海、深圳和惠州外,其他城市的PM2.5浓度普遍较高;Ⅱ型污染时,整个珠三角地区的PM2.5浓度均要高于50.0μg·m-3;Ⅲ型污染时,PM2.5浓度较高的区域主要集中在肇庆、广州以及佛山地区.同时利用珠三角地区4台主要的风廓线雷达数据研究3种污染类型所对应的垂直风场特征发现:Ⅰ型与Ⅲ型污染状况所对应的风廓线相似,低层受东南风控制,高层为西南风,Ⅲ型的风速大于Ⅰ型风速,而Ⅱ型污染时的风速明显大于其他两种类型,其低层几乎均受偏北风影响,而高层则受偏西风的影响.Ⅱ型污染所对应的边界层中低层的风向变化很小,而其他两类则有一定的变化.同时Ⅱ型的通风量要明显大于其他两种类型,其中Ⅰ型的通风量最小.珠三角受偏北风作用时,整个珠三角的PM2.5浓度较高;当盛行东南风时,Ⅰ、Ⅱ区的PM2.5浓度相对较低,而Ⅲ区的污染相对较重.     

可靠性鉴定试验受试样品的软硬件联合测试技术

为了研究一种可靠性鉴定试验中受试样品的软硬件联合测试方法,首先总结了软硬件联合测试的目的、对象、实施时机及传统测试需要的改进之处和可借鉴之处,进一步研究了软硬件联合测试与传统可靠性试验的关系。然后在考查软件与硬件测试结合的基础上,提出了两层结构立体测试运行剖面的方法,即利用子剖面与环境剖面的对应关系建立软件测试与硬件测试的联系,将两种测试统一在同一时间轴上,得出了软硬件联合测试的一般流程。     

Spatial Pattern Analysis of Regional Water Use Profile Based on the Gini Coefficient and Location Quotient

Water resources have become a barrier hampering socioeconomic development. Changes in the spatial distribution of water use profile have direct impacts to regional water use efficiency. However, the related research is inadequate, and a more suitable way to analyze regional water use profile is necessary. The Gini coefficient and location quotient, two reliable methods commonly used in discussing the spatial distribution of elements, were introduced and calculated. Taking Gansu Province as the study area, the concentration effect of industrial water use was the strongest, followed by domestic, environmental, and agricultural water use. However, a balanced distribution of agricultural water use failed to be coordinated with the production conditions, the center of Gansu’s grain production should be established to enhance the scale effect of agricultural production. The industrial agglomeration effect remained weak, and each region’s dominant industries need to be developed vigorously. Gansu’s domestic water use was consistent with its population distribution, but it is necessary to reduce the water use gap between urban and rural areas. With a growing awareness of environmental protection, environmental water use exhibited a more balanced distribution. Overall, the methods are simple and have good applicability, and the results can provide a reference in water use optimization.