Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.     

造纸工业总排水及漂白废水中AOX监测方法的研究

运用TOX测定仪对造纸工业废水及漂白废水中AOX(可吸附有机卤素)测定;水样用硝酸调pH＜2后,以双根活性炭玻璃填充柱连续吸附;将吸附有机物的活性炭在氧气流中燃烧热解、用微库仑法测定其卤化氢.样品前处理比现行活性炭振荡吸附法样品及试剂用量少、快速、重现性好.方法测定浓度下限为3.73μg/L.     

一种控制粮食工厂溜管噪声的简易措施

溜管噪声产生的原因是物料颗粒与溜管壁及物料颗粒之间相互撞击的结果,提出了降低噪声的简单措施,在溜管中安装缓冲箱和降速板可取得较好的降噪效果。     

Aerobic treatment of palm oil mill effluent

In this study treatment of palm oil mill effluent (POME) was investigated using aerobic oxidation based on an activated sludge process. The effects of sludge volume index, scum index and mixed liquor suspended solids during the acclimatizing phase and biomass build-up phase were investigated in order to ascertain the reactor stability. The efficiency of the activated sludge process was evaluated by treating anaerobically digested and diluted raw POME obtained from Golden Hope Plantations, Malaysia. The treatment of POME was carried out at a fixed biomass concentration of 3900+/-200mg/L, whereas the corresponding sludge volume index was found to be around 105+/-5mL/g. The initial studies on the efficiency of the activated sludge reactor were carried out using diluted raw POME for varying the hydraulic retention time, viz: 18, 24, 30 and 36h and influent COD concentration, viz: 1000, 2000, 3000, 4000 and 5000mg/L, respectively. The results showed that at the end of 36h of hydraulic retention time for the above said influent COD, the COD removal efficiencies were found to be 83%, 72%, 64%, 54% and 42% whereas at 24h hydraulic retention time they were 57%, 45%, 38%, 30% and 27%, respectively. The effectiveness of aerobic oxidation was also compared between anaerobically digested and diluted raw POME having corresponding CODs of 3908 and 3925mg/L, for varying hydraulic retention time, viz: 18, 24, 30, 36, 42, 48, 54 and 60h. The dissolved oxygen concentration and pH in the activated sludge reactor were found to be 1.8-2.2mg/L and 7-8.5, respectively. The scum index was found to rise from 0.5% to 1.9% during the acclimatizing phase and biomass build-up phase.     

用造纸污泥制备改性木质素磺酸钠

以甲醛作改性剂,用造纸污泥制备改性木质素磺酸钠,通过正交实验考察了各种因素对改性木质素磺酸钠减水性能的影响。实验结果表明：木质素磺酸钠进行羟甲基化反应时,在10g粗品木质素中加入甲醛7mL、反应温度为45℃、反应液pH为10—11的最佳条件下,改性木质素磺酸钠的减水率为25．2％。经测试,改性木质素磺酸钠的各项性能指标均达到普通减水剂的国家标准要求。     

ENVIRONMENTAL IMPACT ASSESSMENT OF TAILINGS DISPERSAL FROM A URANIUM MINE USING TOXICITY TESTING PROTOCOLS1

ABSTRACT: Toxicity testing is a means of establishing the environmental risk of a uranium tailings release. It is valuable in designing tailings containment structures because it assists in setting acceptable levels of risk for the design. This paper presents details of toxicity tests of the tailings from Ranger Uranium Mine, Northern Territory, Australia. The results suggest that the non-radiological toxicity of the tailings is low. The environmental risk of a tailings release is more likely to be related to the physical impacts of the tailings, including infilling of billabongs and changes in the sedimentology of riparian ecosystems rather than their biogeochemical impact. Two major results were: (1) water from treatment with washed tailing fines were not toxic to Hydra viridissima, and (2) mixtures of washed tailings fines and natural floodplain sediment (overlying water or elutriates) were not toxic to Hydra viridissima or Moinodaphnia macleayi.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

Chemical degradation and biodegradability increase

The mill waste water holds a large amount of polyphenols, preventing the biodegradation processes because of their inhibitory action on microbial growth. Thus, its disposal represents an environmental problem for the great olive oil producing countries in the Mediterranean area. In this work, we present the preliminary results from the application of a photo-oxidative process on mill waste water to evaluate the organic matter degradation potential and the biodegradability of the treated residue. The total organic carbon is reduced up to 35% after 6 hours but the cost-effectiveness is unfavourable. In contrast, the aim of toxicity reduction is less expensive and shows good applicable chances; after 2 h, the polyphenols concentration drops by 60%.     

脱木素工艺处理造纸废水的实践与机理

脱木素工艺为中小制浆企业的黑液治理提供了新的方法。系统中酸化纤维污泥减小碱木素胶粒间的斥力 ,吸附废水中已析出的木质素和细小纤维 ;酸破坏了系统中胶体的水化膜 ,增大了胶体的粒径 ;混凝剂中和胶体表面电荷 ,增加颗粒间的接触机会 ,同时发挥了絮凝沉降的作用。该工艺与传统工艺相比 ,减少了酸及混凝剂的用量 ,木素沉降速度快。当试验废水pH =5、绝干纤维污泥与进水CODCr质量之比为 1.1、硫酸铝投加量为 160mg/L时 ,CODCr去除率高于 63 %。     

Baseline study of methane emission from open digesting tanks of palm oil mill effluent treatment

Anthropogenic release of greenhouse gases, especially CO₂ and CH₄ has been recognized as one of the main causes of global warming. Several measures under the Kyoto Protocol 1997 have been drawn up to reduce the greenhouse gases emission. One of the measures is Clean Development Mechanisms (CDM) that was created to enable developed countries to cooperate with developing countries in emission reduction activities. In Malaysia, palm oil industry particularly from palm oil mill effluent (POME) anaerobic treatment has been identified as an important source of CH₄. However, there is no study to quantify the actual CH₄ emission from the commercial scale wastewater treatment facility. Hence, this paper shall address the CH₄ emission from the open digesting tanks in Felda Serting Hilir Palm Oil Mill. CH₄ emission pattern was recorded for 52 weeks from 3600 m³ open digesting tanks. The findings indicated that the CH₄ content was between 13.5% and 49.0% which was lower than the value of 65% reported earlier. The biogas flow rate ranged between 0.8 l min⁻¹ m⁻² and 9.8 l min⁻¹ m⁻². Total CH₄ emission per open digesting tank was 518.9 kg day⁻¹. Relationships between CH₄ emission and total carbon removal and POME discharged were also discussed. Fluctuation of biogas production was observed throughout the studies as a result of seasonal oil palm cropping, mill activities, variation of POME quality and quantity discharged from the mill. Thus only through long-term field measurement CH₄ emission can be accurately estimated.