CuSnZr三元催化剂应用于NTP强化催化脱硫过程的特性

为高效地在低温下处理大量低浓度电解铝烟气, 采用浸渍法制备了Sn Zr型金属氧化物并添加Cu作为助剂的催化剂, 并首次测试了它在低温等离子体(NTP)技术上的脱硫效果, 结果表明负载了20wt% Cu老化温度为40℃的催化剂表现出最佳的脱硫性能.并对强化之后的催化剂进行了表征, 与新鲜的催化剂对比, X射线衍射分析(XRD)结果表明放电对催化剂晶型基本不产生影响; 扫描电子显微镜(SEM), 氮吸附和脱吸(BET)表明放电会使催化剂的吸附脱附能力与孔道结构有较大提升; X射线光电子光谱(XPS)也表明放电会使催化剂表面元素价态变化, 从而使其氧化还原性能改变, 反应路径发生偏向; 催化剂性能理论计算表明铜含量的上升会导致催化剂能带结构改变, 更好利用于激发气体.     

毫米波近炸探测器超宽带电磁脉冲防护加固措施研究

目的 研究毫米波引信近炸探测器超宽带(Ultra-wideband,UWB)电磁脉冲防护加固措施,提高引信的电磁防护能力。方法 利用超宽带辐照试验平台,开展辐照试验,通过测试,确定受损探测器的损伤部位,明确辐照效应机理,并提出针对性加固措施。结果 超宽带电磁脉冲可使探测器出现死机或硬损伤的现象,受试探测器的效应场强阈值在50~80 kV/m。死机可在重启后恢复,而硬损伤为不可恢复现象。结论 毫米波引信近炸探测器对超宽带电磁脉冲较为敏感,锁相环回路是探测器的敏感部位。探测器暴露在辐照场下的射频电路和天线窗口是超宽带能量的主要耦合通道。采取改进元器件布局、更换器件和屏蔽线等加固措施后,探测器超宽带的防护能力有较大提升,证明了加固措施的有效性。     

脉冲激光发射模块电磁屏蔽效能仿真分析

目的 提高脉冲激光发射模块的电磁兼容性。方法 基于腔体的电磁屏蔽机理,使用HFSS软件,建立脉冲激光发射模块腔体模型,以电磁敏感度、电磁干扰2个方面对腔体电磁屏蔽效能进行仿真分析。结果 设计的双层屏蔽腔体在电磁波辐照频率为1~100 kHz时,屏蔽效能达到28 dB;电磁波辐照频率为0.2~18 GHz时,屏蔽效能达到47 dB。结论 当电磁波辐照频率在1~100 kHz时,腔体的屏蔽效能随频率的增加而增大。辐射源外部激励时,双层屏蔽腔体使用外层铁内层铜屏蔽效能较高。电磁波辐照频率在0.2～18 GHz时,腔体的屏蔽效能随频率的增大而减小,且发生了谐振效应。当腔体厚度相等时,双层屏蔽的屏蔽效能高于单层屏蔽。使用电缆连接器代替孔洞进行信号传输时,腔体屏蔽效能增加。     

废水排放对近海环境中抗生素抗性基因和微生物群落的影响

污水处理厂是水环境中抗生素抗性基因（ARGs）的重要来源.可移动遗传元件（MGEs）和微生物群落是影响ARGs增殖扩散的关键因素.为探究污水处理厂废水排放对近海环境中ARGs和微生物群落的影响,采用高通量荧光定量PCR （HT-qPCR）和高通量16S rRNA扩增子测序技术,对杭州湾上虞（SY）和嘉兴（JX）两个近岸纳污区（ERAs）及远岸湾区表层沉积物中ARGs、MGEs和微生物群落的组成和分布进行调查.结果表明,多重耐药类ARGs是所有样点中丰度最高的ARGs类型.纳污区沉积物中ARGs和MGEs多样性和丰度远远高于远岸湾区沉积物.JX纳污区沉积物中微生物群落丰富度和多样性高于SY纳污区及远岸湾区沉积物.PCoA结果显示,纳污区与远岸湾区沉积物中ARGs、MGEs和微生物群落分布存在显著的差异,说明长期的废水排放对近海环境中ARGs、MGEs和微生物群落影响较大.ARGs、MGEs和细菌属的共现网络显示,嗜冷杆菌属、假单胞菌属、亚硫酸杆菌属、假交替单胞菌属和芽孢杆菌属等12种菌属与ARGs和MGEs存在显著正相关.多重耐药类和β-内酰胺类ARGs的潜在宿主最多.     

自然通风排热量的近似计算法

采用“假设密闭绝热空间法”,计算工业厂房的自然通风排热量。实践证明,此方法是可行的。     

THE DISCHARGE OF SEDIMENT IN CHANNELIZED ALLUVIAL STREAMS1

ABSTRACT: Approximately 400 million cubic feet of channel sediments have been delivered to the Mississippi River from the Obion-Forked Deer River system in the last 20 years. The discharge of sediment from these channelized networks in West Tennessee varies systematically with the stage of channel evolution. Variations in yields over time reflect the shifting dominance of fluvial and mass-wasting processes as the networks adjust to lower energy conditions. Maximum bed-material discharges occur during the initial phases of degradation (Stage III). In contrast, yields of suspended-sediment peak during the threshold stage (Stage 1V: large-scale mass wasting) as sediments are delivered from main-channel banks and tributary beds. Suspended-sediment yields then decrease as aggradation (Stage V) becomes the dominant trend in the main channels, but remains relatively high through restabiliza-tion (Stage VI) because of continued degradation and widening in the tributaries. Bed-material discharges decrease from the degradation stage (III) to Stage V, and increase again during restabiliza-tion (Stage VI) because secondary aggradation increases gradients and incipient meandering serves to rework bed sediments. This secondary maxima in bed-material discharge is analogous to those described previously as complex, or oscillatory, response. The trends of sediment production and transport described from these rejuvenated networks are in agreement with experimental and theoretical results of earlier investigations.     

Local Area Quotas for Industrial Emissions along Reaches of the Pearl River in Guangdong

There is an obvious departure from the regional equilibrium of developments between the upper and lower reaches of the Pearl River in Guangdong, which resulted in ＂the effects of contra-geography-grads development＂. It is mainly because the upriver mountainous areas have been deeply stuck in industrialization delay and marginalization plights, so that nearly 40 million local people have conceived a dream to get rid of ＂the vicious circle of poverty＂ by speeding up industrial development. But the problem is that such industrialization efforts on a large scale in mountainous areas are encountering the bottleneck of environmental capacity that strictly limits industrial emissions along the upper reaches of any water system. As a solution, an institutional arrangement called ＂the Local Area Quotas for Industrial Emissions along the Pearl River＂ is put forward supposed to give corresponding compensation to the rights of industrial development yielded by some areas with lower environmental capacity through the distribution and trading of IDQs.     

管式电除尘器“伞形罩”结构的应用

本文通过分析立式管式电除尘器结构及使用现状 ,总结其失效的主要原因在于阳极 (圆筒管 )的清灰不力。为解决清灰不力的问题 ,提出了“伞形罩”阳极结构 ,其具有的不积尘、自动排灰功能 ,经实践检验 ,效果显著     

乡镇工业电镀行业主要污染物排放量的估算方法

电镀分有氰电镀与无氰电镀两类。乡镇工业电镀行业的环境污染最主要是氰污染和铬污染。本文针对乡镇电镀行业的特点,调查了湖南省沅江市、四川省新都县、湖北省黄陂县、汉川县以及江苏省部分县市乡镇电镀厂,将收集资料及实际监测资料进行回归分析,得出乡镇电镀行业的污染物发生量大小与原材料的消耗有关,可以用多元回归方程估算乡镇电镀行业主要污染物发生量。这一估算方法简单易行,实用可靠,操作方便。     

应用指数平滑法建立城市工业三废排放量预测模型

指数平滑法是常用的一种时间序列预测方法，但用于环境预测的先例则较少。本文以南通市１９８１－１９９０年工业三废排放量时间序列为例，简要介绍了该法的原理以及平滑计算、建模、预测和精度分析的过程，并对其在环境预测中的应用效果进行了探讨，结果表明，该法与目前环境预测中常用的回归法相比，具有数据来源较易，不需要特殊分布，计算简单，精度较高等明显的优点，充分显示出该法在环境预测中应用的可行性。