国内城市生活垃圾焚烧飞灰研究现状及进展

随着我国经济快速发展及城市化水平提升,城市生活垃圾产量越来越大,焚烧逐渐成为城市生活垃圾处理的主要方式.但焚烧会产生大量的垃圾焚烧飞灰(以下简称飞灰),飞灰属于危险废物.论述了飞灰的来源、成分、特性及危害,介绍了飞灰的处理处置技术:水泥固化技术、化学药剂稳定化技术、熔融固化技术、水热稳定化技术和水泥窑协同处理技术,并分...     

PDMDAAC改性粉煤灰预处理油墨废水的研究

本文介绍聚二甲基二烯丙基氯化铵（PDMDAAC）改性粉煤灰的制备,并用制备的改性粉煤灰处理实际油墨废水。研究改性粉煤灰的投加量、反应时间、废水pH值、水温对废水有机物CODG和色度去除率的影响。研究表明在最佳的试验条件下．油墨废水的脱色率高达94％,CODCr去除率也达到了74％。     

粉煤灰资源化的一种有效途径

本文对影响粉煤灰泡沫玻璃质量的主要因素:玻璃软化温度与发泡剂的选择、发泡温度与发泡时间、发泡剂生成气体的温度、坯体成型压力等关键问题进行了探索,这些问题的探索对提高粉煤灰泡沫玻璃质量,获得性能优良的粉煤灰泡沫玻璃具有十分重要的意义。     

聚硅酸氯化铝铁絮凝剂制备及絮凝效果的研究

以粉煤灰和硫铁矿烧渣两种工业固体废弃物为主要原料,制取聚硅酸氯化铝铁(PSAFC)无机高分子絮凝剂。粉煤灰、硫铁矿烧渣和纯碱按1：1：0．8混合．在800～900(焙烧15～30min,用定量1：1盐酸浸取,固体溶出率高达94％,陈化后即为PSAFC絮凝剂。通过模拟和真实印染废水絮凝试验．表明PSAFC絮凝效果与聚合氯化铝(PAC)相当,在沉降速度、污泥体积等方面要优于PAC,且成本比PAC低．具有较大的市场前景。     

粉煤灰固定化絮凝剂填充床-鼓气工艺漂染污水处理研究

以粉煤灰固定化絮凝剂填充成絮凝过滤床 ,并组合成连续 -鼓气式五级絮凝过滤床污水处理系统。在吸附、絮凝、沉降、过滤和降解等协同作用下 ,污水流量为 2 5 L/h、鼓气量为 5 0 L/( L· h)、级数为 5时 ,处理水的悬浮物、色度、COD、氨氮、硫化物和苯胺的去除率分别为 99.0 %、91.8%、96.9%、95 %、96.9%、90 .6% ,p H=6.2～ 6.9,基本达到纺织染整工业污水 级排放标准     

Lead immobilization in mechanochemical fly ash recycling

In previous studies, we focused on a mechanochemical process for recycling fly ash for use in cement; this process was expected to immobilize heavy metals in the fly ash, a desirable outcome in light of the fact that recycled fly ash is commonly used in the synthesis of inorganic materials. Here, we investigated the leaching of lead (Pb) from fly ash treated by a mechanochemical process and from cement prepared from the treated fly ash. We used lead oxide (PbO), a typical Pb compound in fly ash, as a model substance. Mechanochemical treatment of the fly ash inhibited Pb leaching by 93%, and further inhibition (more than 99.9%) was observed in cement produced from the treated fly ash. During the mechanochemical treatment, PbO was reduced to Pb by iron from the stainless-steel mill used for processing, and the lower solubility of Pb in water resulted in immobilization of the Pb.     

Effects of nano-SiO(2) and different ash particle sizes on sludge ash-cement mortar

The effects of nano-SiO₂ on three ash particle sizes in mortar were studied by replacing a portion of the cement with incinerated sewage sludge ash. Results indicate that the amount of water needed at standard consistency increased as more nano-SiO₂ was added. Moreover, a reduction in setting time became noticeable for smaller ash particle sizes. The compressive strength of the ash–cement mortar increased as more nano-SiO₂ was added. Additionally, with 2% nano-SiO₂ added and a cure length of 7 days, the compressive strength of the ash–cement mortar with 1 μm ash particle size was about 1.5 times better that of 75 μm particle size. Further, nano-SiO₂ functioned to fill pores for ash–cement mortar with different ash particle sizes. However, the effects of this pore-filling varied with ash particle size. Higher amounts of nano-SiO₂ better influenced the ash–cement mortar with larger ash particle sizes.     

垃圾焚烧飞灰中重金属分布特征研究

以三峡库区垃圾焚烧飞灰为研究对象,研究了飞灰的粒径分布特征、重金属含量及不同粒径下重金属的分布特征。四季飞灰在粒径分布上有相似的规律:250μm的飞灰占飞灰总量的90%以上,含量最高的是粒径范围处于37-75μm的飞灰;飞灰中不同重金属含量差异很大;飞灰中重金属含量具有季节性差异;不同粒径下重金属含量不同,除Zn外,Cd、Cu、Mn、Pb、Cr基本上符合随飞灰粒径减小重金属含量增大的规律。与国内其他城市飞灰进行比较,库区飞灰中Cd、Mn、Pb的含量相对较高,但Zn的含量却最低。飞灰中各种重金属含量远远超过库区土壤背景值,亦超过国家土壤环境质量二级标准。     

用铝灰生产聚合氯化铝的工艺研究

以铝灰、废盐酸为原料,用酸溶法(一步法)生产液体聚合氯化铝,对投料比、反应温度、反应时间、搅拌速度、熟化温度、熟化时间等参数对产品性能的影响进行了试验,得到了最佳生产工艺条件,并对产品的净水效果进行了模拟试验,净水效果明显。     

热镀锌厂酸洗废水及锌灰中锌回收

分别采用蒸酸法、氨络合法和硫化沉淀法分离回收热镀锌厂酸洗废水及锌灰中锌铁。分别考察了酸洗废水中盐酸的逸出特性和氨浸法回收蒸馏渣中锌的效果;利用酸洗废水的酸度浸取锌灰中的锌并用氨络合法分离酸浸出液中锌铁;利用硫化物不同溶度积选择性沉淀酸浸出液中的锌,考察了Na2S加入量、曝气时间、反应溶液pH和反应时间的影响。研究结果表明硫酸的加入能提高盐酸的蒸发率但效果不明显,氨络合法难于有效分离锌铁,但硫化物沉淀法可较好地分离锌铁,铁回收率可达97．12％,锌沉淀率达到99．99％,所得沉淀物中ZnS纯度为68．51％。