承德建龙3#高炉炉役后期安全生产特点

承德建龙3#高炉第1代炉役后期,炉身冷却壁大量损坏,炉缸部分冷却壁水温差超高,炉底、炉基温度达到安全警戒线,炉壳多处开裂变形,依靠外部打水维持生产的情况下,通过采取加强高炉操作,设备维护管理等技术措施,保证了高炉安全生产.     

安全与企业核心竞争力

企业核心竞争力是支撑企业生存发展的根本动力.核心竞争力的不断提升,是企业长久生存和发展的关键.我国安全事故频发,加入WTO和经济全球化迫使我国必须重视职业安全健康非关税壁垒.从企业核心竞争力、安全与核心竞争力的关系以及造成安全生产现状等方面展开论述,并根据核心竞争力的特征以及市场发展现状得出结论,安全必须加入企业核心竞争力的培育中.     

环保法规变化对电力工业发展的影响

从电力需求、发电能源结构、发电能源布局、电力成本及发电技术等方面阐述了环保法规的变化和环境标准的制定对电力工业发展的影响,指出了研究环境保护法规和环境标准趋势的重要性和必要性.     

抗生素废水的铁屑微电解预处理研究

研究了采用铁屑微电解法预处理抗生素废水.在进水COD质量浓度为6.2 g/L时,试验结果表明,经微电解处理后的废水,COD和色度的去除率分别达到68.3%和79.3%,BOD5/COD从0.306提高到0.56,废水的可生化性得到显著提高.通过正交试验考察pH、反应时间及铁屑用量对处理效果的影响,并对各因素作了单因素影响试验,确定了最佳工艺条件.     

新民市柳河水源地水环境健康风险评价

为了评价新民柳河水源地的供水安全,简要介绍水环境健康风险评价基本方法的基础上,建立了水环境健康风险评价模式.研究结果表明:①柳河水源地地面水基因毒物质为优先控制污染物;而地下水应着力控制躯体毒物质.②对于基因毒物质,监测断面优先控制污染物为As和Cr;而对于躯体毒物质,所有监测断面的优先控制污染物均为氨.③在所有监测断面中,柳河上断面等6处有毒污染物所致健康危害的个人年总风险数量级为10-5-10-4.在日后的管理过程中,应对这6处加大治理力度.④目前环境健康风险评价还没有包括在常规环境评价工作中,建议在今后的评价工作中应该逐步开展这方面的工作,以提高供水安全.     

有机酸性腐蚀品生产危险性分析

目前我国化工生产中涉及大量有机酸性腐蚀品,通过对某市化工行业调查及分析,发现有机酸性腐蚀品生产普遍,而且生产原料易燃易爆,生产过程存在火灾爆炸危险,结合具体生产工艺,采用预先危险性分析法和作业条件的危险性评价法分析生产过程危险性,从而揭示并概括有机酸性腐蚀品生产危险性.为更好地促进我国安全生产,在此基础上探讨了一些针对性的安全措施.     

基于无人机多传感吊舱系统的火点实时定位方法

林火定位是林火智能监测设备的核心技术。提出了一种基于激光雷达、红外热像仪及组合惯导多数据融合的火点定位方法。首先设计了一个通用的无人机吊舱系统,并基于ROS框架实现数据采集、数据处理和数据传输等功能;其次提出了一个基于无人机吊舱系统的火点全局定位方案,根据红外热像仪成像特性识别火点,同时将密集点云与红外图像进行数据融合,估计出火点的三维空间位置;然后根据无人机位姿提出了一种基于墨卡托投影的火点全局定位方案,得到了火点的GPS位置。最后通过试验得到了该方案的全局定位精度：在实验中经度最大误差为2.36×10^-5°,纬度最大误差为1.84×10^-5°,高程最大误差为0.926 1 m,为其他林火定位方案提供了技术支持。     

Causes of change in nitrophytic and oligotrophic lichen species in a Mediterranean climate: impact of land cover and atmospheric pollutants

With the aim of determining the main drivers of changes in nitrophytic and oligotrophic macro-lichen communities in an industrial region with a Mediterranean climate, we considered both land-cover types and atmospheric pollutants. We determined the relation between the abundance of nitrophytic and oligotrophic species with environmental factors considering the distance of influence of land-cover types. The results showed that oligotrophic species decreased in the proximity of artificial areas, barren land and agricultural areas, associated with higher concentrations of NO₂ and Zn, and Ti, probably dust of industrial and agricultural origin. Nitrophytic species were positively related to all the mentioned land-cover types, and with higher concentrations of Fe and N. Magnesium, probably from ocean aerosols, was negatively related to oligotrophic species and positively to nitrophytic.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

Monitoring air quality with lichens: a comparison between mapping in forest sites and in open areas

Four different methods of epiphytic lichen mapping were used for the assessment of air quality in the region under the influence of the Sostanj Thermal Power Plant (Salek Valley, Slovenia). Three methods were based on the presence of different lichen species (VDI, EU and ICP-Forest), the fourth on a frequency and coverage assessment of different growth forms of epiphytic lichens, e.g. crustose, foliose and fruticose (SI). A comparison of the results from the assessment of air quality between forest sites (ICP-Forest, SI) and open areas (VDI, EU and SI), obtained by the different methods of epiphytic lichen mapping, is presented in the contribution. Data showed that lichen species richness is worse in forest sites in comparison with open areas. From the data obtained it can be concluded that epiphytic lichen mapping in open areas is a better method for the assessment of air pollution in a given area than mapping in forest sites. The species-based methods in open areas are more powerful and useful for air quality assessment in polluted research areas than the SI and ICP-Forest methods.