复杂工业产品制造阶段生命周期清单数据获取方法:以轿车为例

准确可靠的工艺单元数据是开展产品生命周期清单分析和影响评价最重要的基础.目前开展的相关研究,由于数据获得性的问题,大多集中在结构或成分较为简单的工业产品.而利用相关数据库开展的生命周期清单分析,不能很好地满足对外公开的对比性评价或商业性应用需要.本文以国产轿车为例,研究提出了其制造阶段生命周期清单分析数据的获取方法,并通过理论研究和实践完善,设计出了一套系统化的数据收集表格,可用于机动车及类似复杂工业产品制造阶段生命周期清单数据获取.     

山水风景地区控规指标体系构建及指标赋值方法的探析——以千岛湖为例

为解决现行的传统城市地区控制性详细规划（简称控规,后同）对山水风景地区控制不力的现象,以千岛湖地区为例,对山水风景地区控规进行了探讨,对控规指标体系的内容和赋值方法进行了有针对性的扩展和改进。借助GIS等技术手段,对地方性特色元素进行分析,并以此为基础,建立了以”分区控制和分类引导”为核心的控制指标体系。将单一地块进一步划分为亚区域进行分别控制,同时通过图示的方式对不同的建设类型进行引导。根据山水风景地区的建设特征,进一步引入、明确了地表改变率、建筑绝对高度、建筑投影面积等指标的赋值方法,增加了城市设计导引等内容,丰富、强化了山水风景地区控规的内容和可操作性。     

The influence of solid matrices on arsenic toxicity to Corophium orientale

In marine ecosystems, benthic organisms are really important because they are the first step in the transfer of contaminants from environment to biota. To this end, this study focused on biological assays with the amphipod Corophium orientale exposed to two different molecules of arsenic: arsenate (As^V), the most abundant form in sediments, and dimethyl-arsinate (DMA), expected to be moderately toxic as an intermediate in the process of detoxification. The toxicity of arsenic compounds was measured after exposure to three different matrices: water, spiked natural sediment and inert spiked quartz sand. LC₅₀ values were calculated for each exposure, and the results confirmed the highest toxicity of As^V, in addition to underlining the importance of matrix of exposure. Water exposure was the matrix which presented the highest toxicity for inorganic arsenic (As^V LC₅₀=3.51 mg L^?1 vs DMA LC₅₀=54.65 mg L^?1), spiked natural sediment demonstrated its capability to chelate arsenate toxicity (As^V LC₅₀=34.27 mg kg^?1 vs. DMA LC₅₀=52.19 mg kg^?1) and spiked quartz sand presented intermediate values for As^V (LC₅₀=25.26 mg kg^?1), whereas for DMA a lower toxicity was registered (LC₅₀=872.35 mg kg^?1). This study can provide some useful data linked with chemical speciation of arsenic and exposure matrix, for improving the correct management of contaminated sediment.     

Behaviour of endosulfan in cabbage (Brassica oleracea L.)

Residue levels of endosulfan were determined in cabbage heads after being sprayed with a formulation containing the insecticide and upon storage at room temperature (15–27°C) and in a refrigerator (2–5°C). The half-life was calculated to be 4.8 and 5.5 days. Peeling removed the residues by 92%. Similarly, washing and washing followed by cooking removed 72% and 97% residue in cabbage stored at room temperature. These treatments were slightly less effective for samples stored in a refrigerator. Household processes such as peeling, washing, and washing followed by cooking should be regular practice before the vegetables are used.     

Dissipation kinetics of novaluron in tomato,an arid ecosystem pilot study

Novaluron, a newly introduced insecticide, is used for control of a number of field pests. However, information regarding novaluron residues and dissipation profile is limited. In this study, dissipation and residual levels of novaluron in tomato under open field conditions were investigated using high performance liquid chromatography equipped with diode array detector (HPLC-DAD) with quick, easy, cheape, effective, rugged (QuEChERS) method. The method was validated using blank samples spiked at three levels and results showed that recoveries ranged from 93% to 99%. Novaluron residues tend to dissipate following first-order rate kinetics with half-life of 2.08 days. Data demonstrated that the use of novaluron at recommended doses would not pose any hazards to consumers. The present results aid to establish the safe use of this pesticide on tomatoes, and possibly on other crops in Egypt.     

Field dissipation and health hazard assessment of Fenhexamid on Egyptian grapes

Dissipation behavior and hazard assessment of the fungicide fenhexamid applied to grapes were investigated under climatic conditions in Egypt. Fenhexamid residues were extracted from grape samples with ethyl acetate. The extract was cleaned up by QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, and determined by gas chromatographic method (GC-μECD). The average recoveries ranged between 94.2% and 99.4% with associated relative standard deviation not exceeding 12%. The estimated limit of quantification for fenhexamid was 0.1 mg/kg. The field results showed that fenhexamid dissipated rapidly from grapes and had a half-life of approximately 4.21 days. Hazard assessment was evaluated by using the hazard quotient (HQ). Data showed that the HQ value was significantly less than HQ = 1. Results indicate that hazard of fenhexamid use in grape even at 1.5-fold higher than recommended dosage was negligible to humans. This study could provide guidance for safe and reasonable use of fenhexamid in grapes and prevent health problems to consumers. However, further hazard assessment studies are needed to ascertain the hazard of fenhexamid residues on grape to vulnerable groups, including children, pregnant women, and elderly consumers.     

废弃液晶显示屏中液晶的回收与性能检测

为回收废弃LCD(液晶显示器)显示屏中的液晶,提出了“超声波辅助有机溶剂溶解液晶屏、膜过滤和减压蒸馏”的回收方法,并以TN-TFT显示模式的液晶屏为试验对象,对回收液晶的光电性能进行检测和相变分析,以评估其潜在的利用价值. 结果表明:方法的回收率达50%;收集物液晶特性明显,呈现出较宽的向列相温变区间和较高的清亮点温度,但纯度不高,达不到日常显示所用的液晶纯度要求(GCMS>99%);响应时间为33.2ms,可以满足日常LCD显示屏的要求;介电常数为4.71,折射率为0.089,虽与纯净液晶相比稍有下降,但可满足标准AM-LCD显示的参数要求;阈值电压为3.2V,比纯净液晶有所提高,可进一步去除离子性杂质进行提纯,以降低阈值电压.      

制备条件对合成针铁矿的影响

考察了溶液酸碱性、老化条件、老化时间以及矿化剂滴加速度等因素对合成针铁矿的影响,通过粉末X射线衍射（XRD）、扫描电镜（SEM）、比表面（BET）及粒度分布测试,旨在找到合成产物结晶程度好、比表面积较大、结晶较为均一且方便操作的适宜制备条件及方法.结果表明,在实验室,采用迅速混合矿化剂,碱性条件下70℃老化48 h以上,可制得结晶程度好,粒度分布均匀,较为均一的雪花状针铁矿.采用逐滴滴加矿化剂,上述条件下可制得结晶程度好,较均匀分布的条柱状针铁矿.     

综合利用在含铬废水处理工艺改进上的体现

针对含铬废水处理站运行状况进行了分析,找出了不符合ISO14001标准的因素,结合公司“三废”具体实际,进行了工艺改进,以废治废和回用水资源,实现清洁生产。     

铵饱和天然钙型沸石的化学再生效果

为实现沸石人工湿地的长期高效运行,以铵饱和天然钙型沸石为对象,通过沸石化学再生试验,从6种常用化学再生剂(NaCl+NaOH,NaCl+CaCl₂和NaCl+NaHCO₃组合型,以及NaCl,CaCl₂和NaHCO₃)中筛选出最佳再生剂,并优化了再生剂适用条件. 结果表明,NaCl+CaCl₂组合型再生剂能提升沸石再生率10%～20%,且不影响沸石结构,是一种较优的再生剂. 采用NaCl+CaCl₂组合型再生剂,Na+在沸石再生初期起主导作用,而当c(Na＋)较低时,Ca2+的离子交换作用逐渐起主导作用,因而采用该组合型再生剂能显著提升再生剂效果的持久性. 再生条件优化试验表明,当c(NaCl)∶c(CaCl₂)为7∶3,即当Ca2+和Na+所带正电荷数接近时,组合型再生剂再生率相对较高;当再生温度低于45℃时,升高温度能显著提升沸石再生率;而再生剂投加量为0.6 mol/L(以再生剂中的阳离子浓度计)时,组合型再生剂投加量最经济.