基于生命周期的产品碳足迹评价与核算分析

近年来,越来越多的企业对其产品进行碳足迹评价,评价方法主要采用产品碳足迹评价标准提供的碳计量方程,如GHG Protocol、ISO14064、PAS 2050、TS Q 0010等。在介绍相关评价标准的基础上,分析了产品碳足迹的评价步骤,最后利用河北盛华化工有限公司生产的PVC产品为例,给出了基于生命周期的B2B模式的产品碳足迹评价的案例。为企业及相关机构开展碳足迹评价提供借鉴作用。     

人群密度对人群拥挤事故的影响

为了研究公共场所的人群密度与拥挤事故的发生概率.基于连续人群流动模型,从人群密度角度探讨了人群拥挤事故发生的机理.由于不同民族个体生理尺寸的差异,人群最大忍受密度不同,以此作为判断人群拥挤事故的标准,并结合我国情况提出我国人群最大忍受密度为9人/m2.最后模拟了某个拥挤事故场景,用该模型对其进行拥挤事故分析.结果表明,连续人群流动模型可以用于预测拥挤事故的发生,对预防和控制人群拥挤事故具有一定的指导意义.     

Experimental investigation of the e ect of flow turbulence and sediment transport patterns on the adsorption of cadmium ions onto sediment particles

The mechanism of flow turbulence,sediment supply conditions,and sediment transport patterns that affect the adsorption of cadmiumions onto sediment particles in natural waters are experimentally simulated and studied both in batch reactors and in a turbulencesimulation tank.By changing the agitation conditions,the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment.It is found that the adsorption rate of bottom sediment is much lessthan that of suspended sediment,but the sediment transport pattern does not affect the final(equilibrium)concentration of dissolvedcadmium.This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern.Inthe turbulence simulation tank,the turbulence is generated by harmonic grid-stirred motions,and the turbulence intensity is quantifiedin terms of eddy diffusivity,which is equal to 9.84F(F is the harmonic vibration frequency)and is comparable to natural surfacewater conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment,the adsorption rateis significantly low,and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of theexperiment.This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in naturalrivers.When the turbulence intensity is high but bottom sediment persists,the rate and extent of descent of the dissolved cadmiumconcentration in the tank noticeably increase,and the time that is required to reach adsorption equilibrium also increases considerablydue to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results ofthe experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of the sediment,andin particular the adsorption rate,is greatly over-estimated in the batch reactor.     

垂直流人工湿地系统基质优化级配研究

选取生物陶粒、无烟煤、沸石、钢渣和蛭石为基质,按不同的级配方式填充成基质柱,进行垂直流人工湿地模拟柱净化污水实验.研究表明,粒径分层级配基质对COD的去除率均高于单一粒径基质,其中分层生物陶粒对COD的平均去除率高达72.91%.分层沸石对总氮的净化能力较单一粒径基质有所提高,平均去除率高达91.23%.填充了生物陶粒、沸石和无烟煤的模拟柱对有机物和氮的净化效果和单一基质没有显著性差异(p0.05).填充钢渣和无烟煤的模拟柱出水pH值均在正常范围内,但是除从上到下依次填充无烟煤、蛭石和钢渣的基质柱外,其它填充钢渣和无烟煤的模拟柱对磷素的净化能力都低于单一基质.种植植物对净化效果没有明显影响.在垂直流人工湿地中,针对水质特点选择高效的级配基质,如分层生物陶粒、分层沸石、分层无烟煤以及生物陶粒、沸石和无烟煤组合,在高水力负荷条件下可获得更好的处理效果.     

酸雨与镧对大豆幼苗生长的复合伤害效应研究

为探索酸雨与稀土镧对大豆幼苗生长的复合影响及其内在机制,以重要油粮作物大豆(Glycine max)为材料,研究在模拟酸雨pH分别为3.0、3.5、4.5与稀土镧La(Ⅲ)浓度分别为60、100和300mg·L-1处理下大豆幼苗生长及光合作用的变化.结果表明,相对单一酸雨与镧处理,酸雨与La(Ⅲ)复合处理组中大豆幼苗的生长受抑制程度增大,两者呈协同效应,且pH越低,La(Ⅲ)浓度越高,抑制效应越明显.光合参数的变化规律与生长指标近同,相同处理组各光合参数的降幅不一致,其中最大荧光(Fv/Fm)和叶绿素含量(Chl)的降幅范围分别为9.53%～22.75%和9.14%～24.53%,较净光合速率Pn(22.78%～84.7%)、希尔(Hill)反应速率(15.52%～73.38%)和Mg2+-ATPase活性(14.51%～71.54%)小,表明各光合参数对2个胁迫因子的敏感程度存在差异.进一步相关性分析发现,Pn变化主要受Hill反应速率与Mg2+-ATPase活性的影响,而Chl、Fv/Fm次之.表明酸雨与La(Ⅲ)对植物光合过程各环节的作用机制不同,光合作用受阻是影响植物生长的重要因素之一.     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

LCA of eucalyptus wood charcoal briquettes

This paper sets out to describe the environmental impact assessment for wood charcoal briquettes produced from eucalyptus wood in Brazil, with specific reference to those impacts associated with Global Warming Potential. To achieve that objective, the work was undertaken in accordance with ISO 14040 "Environmental management - Life cycle assessment - Principles and framework" which describes essential LCA characteristics and good practices. Charcoal briquettes are produced from two basic raw materials, charcoal fines and starch. The fines result from the production of charcoal from sustainably managed eucalyptus plantations. Starch is extracted from babaçu pulp in the Amazon region. Multi-output processes were allocated based on income from the different by-products. The results showed that more than 90% of incoming CO₂ was due to biomass production for charcoal, and the remainder to starch biomass production. Based on Brazilian data, as well as information provided by the GaBi4.3 database, it turned out that supplying the energy content of 1 kg of briquettes resulted in the sequestration of 3.9690 kg of CO₂, i.e. around 4 kg of CO₂ per kg of briquettes produced. CO₂ emissions throughout the briquette production process are totally compensated for by the environmental quality of the raw materials used.     

基于ARDL方法分析福建省资源利用与经济增长关系

运用物质流分析方法以及最新发展的自回归分布滞后模型(ARDL),对福建省1990~2008年资源利用和实际GDP二者关系进行检验和分析.采用了物质流分析指标中直接物质投入来表征区域资源利用量.ARDL边界检验结果表明,资源利用和经济增长间存在稳定的长期均衡关系.进一步通过ARDL模型揭示了区域经济增长对资源利用长期弹性系数,其值约为0.73,通过误差修正模型揭示了短期弹性系数,表明了经济增长到资源利用的长期格兰杰因果关系.对福建省经济增长和资源保护战略提出了政策建议.这一研究思路和方法具有普适性,可以适用于其他地区关于资源利用和经济增长的问题的讨论和研究.     

基于生命周期的循环农业系统评价

针对"循环经济系统是低碳经济的实现途径之一"的观点,在国内外研究的基础上,改进LCA模型,以湖南某典型的循环鸭业产业进行实证研究.整个鸭产业生命周期中耗用的不可再生资源、土地、水资源分别为48.629MJ、2.36m2和1321.41kg,潜在的温室气体、环境酸化、富营养化、人体毒性、水体毒性、土壤毒性分别为11543.26g(CO2eq)、52.36g(SO2eq)、25.83g(PO4eq)、1.26、60.74、24.65g(1,4-DCBeq),加权评估后,富营养化、水体毒性、土壤毒性潜在威胁均高于温室气体.结果表明,建立在传统生产模式上的循环农业适宜"适度循环";循环农业不能盲目追求低碳发展,在降低碳排放的同时还须考虑土壤和生物固碳,才能全面评价碳排放问题;循环经济和循环农业在评估碳排放的同时,还需对环境酸化、富营养化、生态毒性等其他生态指标进行评估,建立系统评价体系;LCA能够较好地对循环农业进行整体评价,值得进一步研究.