武汉市城市绿化树种结构与分布特征分析

针对武汉市城市森林的抽样调查分析表明,城市树木树种构成集聚性明显而多样性相对较差、长势一般;城市扰动因素明显影响了树木的自然生长过程。在所调查的93种植物中,其总体多样性指数为0.727 8;行道绿地为0.187;公园绿地为4.296。结果表明武汉市城市森林的基本格局、树种结构,以及树种分布上均有待于改善。     

中亚热带次生林成林规律及经营技术研究——Ⅱ.次生林的演替规律

本文研究了湖南省中亚热带次生林的种群动态,建立了静态生命表、存活曲线、结构模型以及材积或生物量动态模型,提出了中亚热带次生林的演替基本模式。     

重庆缙云山常绿阔叶林群落物种多样性与土壤因子的关系

探讨了缙云山常绿阔叶林物种多样性的变化特征，并运用去势典范对应分析(DCCA)方法，分析了不同样方中土壤因子与群落多样性指数之间的关系．结果表明：(1)17个样方中物种丰富度指数是草本层最高，均匀度指数是乔木层最高．(2)土壤含水量和水解氮与乔木层物种丰富度和均匀度相关性明显，有效磷和乔木层均匀度有明显相关；全氮含量和有机质含量与草本层物种的均匀度有明显相关．(3)多酚氧化酶活性和乔木层物种的均匀度有明显相关，转化酶活性与乔木层物种丰富度和均匀度均有一定相关，多酚氧化酶活性和酸性磷酸酶活性与草本层的物种均匀度和丰富度有明显相关．图2表3参20     

中亚热带次生林成林规律及经营技术研究——Ⅲ.次生林数量动态与经营的生态经济对策

本文通过种群自我调节的规律以及Leslie模型进行数量动态分析,从而提出了次生林数量动态与经营的生态经济对策。     

过硫酸盐缓释材料释放过程模型构建

为预测评估过硫酸盐缓释材料的释放性能,对释放过程模型的构建以及模型的验证进行了研究。借助微积分思想,从材料体的概化分割、初始条件设定、每个小单元的状态标定、各个小单元中过硫酸钾的迁移变化量以及材料最外层释放过硫酸盐的量5个方面构建过硫酸盐缓释材料释放模型,利用Excel-VBA编程实现其释放过程模拟。采用欧盟标准NEN7375测试过硫酸盐缓释材料释放性能并获得模型参数。通过输入相关模型参数得到过硫酸盐动态迁移过程及其释放特征曲线,并利用实测数据与模拟数据进行拟合校验。结果表明,模型模拟值与实测值拟合较好,平均误差为1.88%,表明该模型设计合理,能够准确模拟过硫酸盐缓释材料释放过程,可作为缓释材料优化设计工具。     

Elevated atmospheric deposition and dynamics of mercury in a remote upland forest of southwestern China

Mt. Gongga area in southwest China was impacted by Hg emissions from industrial activities and coal combustion, and annual means of atmospheric TGM and PHg concentrations at a regional background station were 3.98 ng m⁻³ and 30.7 pg m⁻³, respectively. This work presents a mass balance study of Hg in an upland forest in this area. Atmospheric deposition was highly elevated in the study area, with the annual mean THg deposition flux of 92.5 μg m⁻² yr⁻¹. Total deposition was dominated by dry deposition (71.8%), and wet deposition accounted for the remaining 28.2%. Forest was a large pool of atmospheric Hg, and nearly 76% of the atmospheric input was stored in forest soil. Volatilization and stream outflow were identified as the two major pathways for THg losses from the forest, which yielded mean output fluxes of 14.0 and 8.6 μg m⁻² yr⁻¹, respectively.     

黑龙江省森林火灾年际变化的小波分析

小波分析是一种新的时一频分析工具，广泛适用于非线性科学领域。选用Daubechies小波系对黑龙江省森林火灾的特征进行了分解和重构，结果表明，黑龙江省1953—2002年受害森林面积有近15～20a的周期波动性，森林火灾次数则有近30a的周期波动性。未来几年内，该省森林火灾受害面积和火灾次数会在较低的水平上波动，但森林火灾可能要比2000年严重。     

基于O/E模型的浅水湖泊生态系统健康评价

以长江中下游阻隔型浅水湖泊为研究对象,分析了1998—2018年116湖次底栖动物野外调查数据,构建了基于预测模型的观测物种组成/期望物种组成(O/E)指数健康评价指标体系,评价了长江中下游浅水湖泊的底栖动物物种组成完整性.O/E指数模型评价结果显示,在物种采集概率(Pc)>0阈值条件下的O/E0模型预测得到的监测湖泊...     

高森林火险天气形势及其前期气候特征与预报

利用1980-2006年27年间黑龙江省林区发生的37次特大森林火灾资料,针对高空500hPa温压场的结构,将着火前3天短期时段内的天气形势分为4类8型,在此基础上对相对湿度与气温等因子的变化进行了分析,并对高火险日数及前期气候与大气环流特征进行了预报.     

Performance of a large-scale greenhouse solar dryer integrated with phase change material thermal storage system for drying of chili

ABSTRACT

Large-scale greenhouse solar dryers have been used for drying various products and this type of dryer is usually equipped with LPG burner as auxiliary heater, which creates more operating cost. To overcome this problem, phase change material (PCM) thermal storage was proposed to substitute for the LPG burner. In this work, the performance of a large-scale greenhouse solar dryer integrated with a PCM as a latent heat storage for drying of chili was investigated. Experimental studies were conducted to compare the performance of this dryer with that of another large-scale greenhouse solar dryer without the PCM thermal storage and open sun drying. Chili with an initial moisture content of 74.7% (w.b.) was dried to a final moisture content of 10.0% (w.b.) in 2.5 days, 3.5 days, and 11 days using the solar dryer integrated with the PCM thermal storage, the solar dryer without the PCM thermal storage and the open sun drying, respectively. The performance of the solar dryer integrated with the PCM thermal storage was also evaluated using exergy analysis. The exergy efficiency of the drying room of the solar dryer integrated with the PCM thermal storage and the solar dryer without the PCM thermal storage for drying of chili was found to be 13.1% and 11.4%, respectively and the thermal storage helps to dry chili during adverse weather conditions. The results of exergy analysis implied that the exergy losses from the dryer with the PCM should be reduced.