内循环厌氧反应器流动模型及反应过程模拟

为揭示内循环厌氧反应器放大过程中所出现的规律,本文对反应器中流动模型和反应过程进行了模拟研究,通过对主反应区的停留时间分布的实验研究,确定了主反应区流型可用一平推流与两个并联的全混流进行串联的三参数组合模型进行模拟.在实验范围内,平推流区所占的体积分数约为36%,两个全混流区所占的体积分数分别为53%和11%.结合厌氧反应动力学方程,应用组合模型模拟了实际反应器的状态,并和实验值进行了对比,发现反应器出口处CH_4体积流量最大误差为9.67%,在可允许的范围内.同时,模拟了基质初始COD和温度变化对反应器出口状态的影响.研究表明,与其它模型相比,组合模型计算简洁,同时又有较好的精度,能够满足反应器的设计需要.     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

A thermal hazard risk evaluation of emulsion polymerisation and vinyl acetate monomers in the latex manufacturing process

Latex is extensively used in industrial products. However, completing some processes at scale leads to unacceptable levels of risk that need to be quantified and mitigated. Systemic risks must be eliminated wherever possible, and safety takes priority over efficiency and quality. To assess the process risks accurately, four raw materials were examined in this study: polyvinyl acetate (PVA), latex process-initiator-ammonium persulfate (APS) and hydrogen peroxide (H₂O₂), and vinyl acetate monomer (VAM). The physicochemical composition of the PVA latex process was determined via calorimeters, including differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2). The calorimetry results showed that the protective colloid was a critical component in the polymerisation reaction. In addition, when adding initiators to the system, it is vital to observe the normal ratio of materials and keep the stirring system operating. The scenario system also simulated the effects of shutting down various inhibitory programs, including the build-up of free radicals that could result in a runaway reaction when the initiator was added in excess. On the other hand, the result of the risk matrix displayed as a medium level, indicating that although the probability of an accident is low, the resulting severity is at disaster level. As a result, this study provides process safety engineers with a reliable frame of reference for assessing the potential dangers in the PVA latex manufacturing process.     

蒙脱土原位生长MoS2复合材料光催化降解罗丹明B的机理研究

通过在Na⁺-MMT表面生长MoS₂来提高窄带隙半导体光生电子分离速率及稳定性.利用阳离子填充法及水热法成功制备了复合光催化剂Na⁺-MMT/MoS₂,并通过FT-IR、SEM、TEM、Raman、XRD、TG、XPS、UV-DRS和ESR等表征进一步证明了材料的成功负载及光、电化学性能. 同时,以有机染料罗丹明B为待降解染料来评价光催化剂的催化性能,发现其在80 min可有效降解罗丹明B,降解率达96%.经过5次循环使用后,Na⁺-MMT/MoS₂复合光催化剂仍具有较好的光催化性能.因此,利用MMT的表面电负性及稳定的片层结构负载MoS₂,可形成光生电子迁移通道进一步提高电荷迁移速率及光催化剂的稳定性.本研究可为黏土材料调控窄带隙半导体制备环境友好型光催化剂提供新思路.     

火工品温湿度加速老化模型和算法研究

目的 研究对火工品适用的温湿度加速模型,以及加速系数计算程序,获取准确的温湿度加速系数外推公式.方法 通过分析国内外使用的各种双因素加速模型的适用性,确定火工品适用的温湿度加速模型,采用免费自由的开源统计分析软件——R软件,对通过加速试验获取的某点火头2种温湿度加速条件下的试验数据,进行单组数据拟合和多组数据拟合两种温湿度加速老化算法的开发,并且对2种算法、3种寿命分布下寿命外推的准确性进行对比分析.结果 确定了Peck模型适合用于火工品的温湿度加速模型,获取了某电点火头对应的温湿度加速系数和湿度项反应速率常数.结论 基于多组数据拟合的温湿度加速老化算法,比基于单组数据拟合的温湿度加速老化算法对试验数据的兼容性好.3种寿命分布中,Weibull分布的加速系数计算结果最保守.     

纳米零价铁在应用中存在的问题及提高反应活性的方法

纳米零价铁对多种污染物质均有较好的去除效果,在污染的水体、土壤及底泥中被广泛研究与应用。前人对纳米零价铁的制备、在污染治理各方面的应用、作用的机理等方面进行了较为详细的总结,针对纳米零价铁在应用中存在的问题虽有提及,但少有人集中进行整理。本文主要针对纳米零价铁在环境治理方面存在的问题进行论述并对提高其反应活性的常用方法进行了总结,以期为纳米零价铁实际应用领域的深入研究提供借鉴并拓展新的思路。     

H2O2 treatment boosts activity of NiFe layered double hydroxide for electro-catalytic oxidation of urea

Urea oxidation reaction (UOR) provides a method for hydrogen production besides wastewater treatment, but the current limited catalytic activity has prevented the application. Herein, we develop a novel H₂O₂ treatment strategy for tailoring the surface oxygen ligand of NiFe-layered double hydroxides (NiFe-LDH). The sample after H₂O₂ treatment (NiFeO-LDH) shows significant enhancement on UOR efficiency, with the potential of 1.37 V (RHE) to reach a current density of 10 mA/cm². The boost is attributed to the richness adsorption O ligand on NiFeO-LDH as revealed by XPS and Raman analysis. DFT calculation indicates formation of two possible types of oxygen ligands: adsorbed oxygen on the surface and exposed from hydroxyl group, lowered the desorption energy of CO₂ product, which lead to the lowered onset potential. This strategy is further extended to NiFe-LDH nano sheet on Ni foam to reach a higher current density of 440 mA/cm² of UOR at 1.8 V (RHE). The facile surface O ligand manipulation is also expected to give chance to many other electro-catalytic oxidations.     

An approach to preimplantation diagnosis of β-thalassaemia

Using the polymerase chain reaction (PCR), it was possible to amplify a single copy fragment of the β-globin gene from 2–32 human embryonic cells obtained from arrested preimplantation embryos. For the detection of β-thalassaemia mutations, allele specific priming of the PCR using nested primers was employed using approximately 10 pg of DN A from individuals known to carry these mutations. This approach was successful in detecting the presence or absence of five Asian Indian β-thalassaemia mutations that were selected for this study. In spite of meticulous precautions against contamination, false-positive amplification was observed, a problem that will have to be overcome before this approach can be used in clinical practice.     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.     

光助芬顿反应催化降解气体中甲苯

以甲苯作为挥发性有机污染物(VOCs)的代表,利用连续进气动态实验装置,研究光助芬顿反应降解气体中甲苯的作用.考察了芬顿试剂溶液初始p H、H2O2浓度、Fe2+浓度以及甲苯初始浓度对降解甲苯的影响,并利用在线质谱和色谱对产物进行了定性、定量分析.结果表明,紫外光照加快了羟基自由基的生成,显著提高了气体中甲苯的去除率;p H=3.0、H2O2浓度为20 mmol·L-1、Fe2+浓度为0.3 mmol·L-1的条件下,甲苯去除率最高;当甲苯初始浓度为260 mg·m-3时,去除率能够达到98%;光助芬顿反应催化降解气体中甲苯实验未检测到CO2之外的中间产物,CO2产率分析表明去除的甲苯全部转化为CO2.