加压条件下石灰石的脱硫反应研究

对石灰石在加压条件下的脱硫反应进行了实验研究。实验采用加压热重分析（PTGA）法,得出了加压时石灰石脱硫反应转化率数据。当压力为1.15MPa时,转化率在30.5％～45％之间。测定了加压条件下反应温度、SO₂浓度和石灰石品种对CaCO₃转化率的影响并建立了反应数学模型并由模型计算了脱硫反应动力学参数。最后对反应机理进行了分析。     

我国大气环境标准体系的研究

针对我国大气环境管理的发展及实际情况,运用系统分析及目标规划的方法,设计了大气环境标准体系。大气标准体系包括基础标准、大气环境质量标准、排放标准、方法标准、样品标准、燃料使用标准、产品设备大气环保标准、环保行业大气环境保护标准。同时,在大气标准体系中将总量控制思想引入大气污染物排放标准的规定,提出按大气污染物的特征,分3种类型制定大气污染物排放标准等。     

近地层氮氧化物和臭氧的区域分布研究

介绍了近地层氮氧化物和臭氧的区域分布研究方法,使用简化的区域尺度大气污染物传输模型和光化学反应模型,模拟计算了1990年中国主要城市排放氮氧化物的情景下,夏季(7月)主要城市的氮氧化物和相应的臭氧在近地层的浓度分布。      

燃煤流化床中N2O生成与分解的均相反应机理

介绍由燃料氮生成Ｎ２Ｏ的主要途径是：ＮＣＯ→ＮＯ→Ｎ２Ｏ＋ＣＯ,ＮＨ＋ＮＯ→Ｎ２Ｏ＋Ｈ;分解Ｎ２Ｏ的主要反应是：Ｎ２Ｏ＋Ｈ→Ｎ２十ＯＨ。分析了挥发分中的燃料氮成分、煤种、炉内温度、过量空气系数、分级与单级燃烧方式等因素对Ｎ２Ｏ排放的影响。     

甲苯法生产己内酰胺污水治理研究

通过对己内酰胺生产污水治理的研究 ,总结出以ENSBR法处理高含氮、高浓度有机物污水的一些规律 ,以及CODCr负荷、氨化作用、碱度 (pH值 )等对硝化反应的影响。     

大气臭氧损耗中双自由基反应机理的量子化学研究

用量子化学ＲＨＦ理论方法研究了单重态双自由基ＮＨ,ＣＨ２、ＣＣＬ２与大气臭氧Ｏ３的反应机理。在３－２１Ｇ水平上用梯度解析技术优化了上述瓜在的反应物、中间体和产物构型,６－３１Ｇ或６－２１Ｇ计算能量,得到了各构型的有关结构数据。计算表明：上述反应分２步进行,双自由基先与Ｏ３反应生成稳定的中间体,然后在光照条件下中间体分解为ＮＨＯ、Ｈ２Ｃ烽ＣＬ２ＣＯ等稳定分子。从动力学看,２步反应分别为「π４ｓ＋Ｗ２     

α-Fe2O3/AC催化剂的制备及光Fenton反应降解双酚A

采用温和的无模板溶液反应合成了α-Fe₂O₃/AC复合催化剂,作为光Fenton降解双酚A反应的催化剂。通过XRD、SEM、FTIR、DRS、BET、XPS等方法对催化剂的形貌和理化特性进行了分析。结果表明：该催化剂晶型良好,为介孔材料,能够有效吸收和利用紫外光和可见光;该催化剂具有较高的催化活性,稳定性良好;在初始双酚A质量浓度为30 mg/L、溶液pH为4、H₂O₂加入量为320 mg/L、反应温度为40 ℃、催化剂加入量为1.33 g/L的条件下,双酚A降解率可达91.4%。     

Optimized determination of airborne tetracycline resistance genes in laboratory atmosphere

• Sampling parameters with high efficiency was determined. • Operational process to detect airborne ARGs was optimized. • Providing research basis to control airborne ARGs of a laboratory atmosphere Antibiotic resistance genes (ARGs) have been detected in various atmospheric environments. Airborne ARGs transmission presents the public health threat. However, it is very difficult to quantify airborne ARGs because of the limited availability of collectable airborne particulate matter and the low biological content of samples. In this study, an optimized protocol for collecting and detecting airborne ARGs was presented. Experimental results showed that recovery efficiency tended to increase initially and then declined over time, and a range of 550–780 copies/mm² of capture loading was recommended to ensure that the recovery efficiency is greater than 75%. As the cell walls were mechanically disrupted and nucleic acids were released, the buffer wash protects ARGs dissolution. Three ratios of buffer volume to membrane area in buffer wash were compared. The highest concentrations of airborne ARGs were detected with 1.4 µL/mm² buffer wash. Furthermore, the majority of the cells were disrupted by an ultrasonication pretreatment (5 min), allowing the efficiency ARGs detection of airborne samples. While, extending the ultrasonication can disrupt cell structures and gene sequence was broken down into fragments. Therefore, this study could provide a theoretical basis for the efficient filter collection of airborne ARGs in different environments. An optimized sampling method was proposed that the buffer wash was 1.4 µL/mm² and the ultrasonication duration was 5 min. The indoor airborne ARGs were examined in accordance with the improved protocol in two laboratories. The result demonstrated that airborne ARGs in an indoor laboratory atmosphere could pose the considerable health risk to inhabitants and we should pay attention to some complicated indoor air environment.     

Dual-reaction-center catalytic process continues Fenton’s story

• Dual-reaction-center (DRC) system breaks through bottleneck of Fenton reaction. • Utilization of intrinsic electrons of pollutants is realized in DRC system. • DRC catalytic process well continues Fenton’s story. Triggered by global water quality safety issues, the research on wastewater treatment and water purification technology has been greatly developed in recent years. The Fenton technology is particularly powerful due to the rapid attack on pollutants by the generated hydroxyl radicals (•OH). However, both heterogeneous and homogeneous Fenton/Fenton-like technologies follow the classical reaction mechanism, which depends on the oxidation and reduction of the transition metal ions at single sites. So even after a century of development, this reaction still suffers from its inherent bottlenecks in practical application. In recent years, our group has been focusing on studying a novel heterogeneous Fenton catalytic process, and we developed the dual-reaction-center (DRC) system for the first time. In the DRC system, H₂O₂ and O₂ can be efficiently reduced to reactive oxygen species (ROS) in electron-rich centers, while pollutants are captured and oxidized by the electron-deficient centers. The obtained electrons from pollutants are diverted to the electron-rich centers through bonding bridges. This process breaks through the classic Fenton mechanism, and improves the performance and efficiency of pollutant removal in a wide pH range. Here, we provide a brief overview of Fenton’s story and focus on combing the discovery and development of the DRC technology and mechanism in recent years. The construction of the DRC and its performance in the pollutant degradation and interfacial reaction process are described in detail. We look forward to bringing a new perspective to continue Fenton’s story through research and development of DRC technology.     

Effect of flame propagation regime on pressure evolution of nano and micron PMMA dust explosions

Experiments using an open space dust explosion apparatus and a standard 20 L explosion apparatus on nano and micron polymethyl methacrylate dust explosions were conducted to reveal the differences in flame and pressure evolutions. Then the effect of combustion and flame propagation regimes on the explosion overpressure characteristics was discussed. The results showed that the flame propagation behavior, flame temperature distribution and ion current distribution all demonstrated the different flame structures for nano and micron dust explosions. The combustion and flame propagation of 100 nm and 30 μm PMMA dust clouds were mainly controlled by the heat transfer efficiency between the particles and external heat sources. Compared with the cluster diffusion dominant combustion of 30 μm dust flame, the premixed-gas dominant combustion of 100 nm dust flame determined a quicker pyrolysis and combustion reaction rate, a faster flame propagation velocity, a stronger combustion reaction intensity, a quicker heat release rate and a higher amount of released reaction heat, which resulted in an earlier pressure rise, a larger maximum overpressure and a higher explosion hazard class. The complex combustion and propagation regime of agglomerated particles strongly influenced the nano flame propagation and explosion pressure evolution characteristics, and limited the maximum overpressure.