Adsorption of basic dye from aqueous solution onto fly ash

The fly ash treated by H₂SO₄ was used as a low-cost adsorbent for the removal of a typical dye, methylene blue, from aqueous solution. An increase in the specific surface area and dye-adsorption capacity was observed after the acid treatment. The adsorption isotherm and kinetics of the treated fly ash were studied. The experimental results were fitted using Langmuir and Freundlich isotherms. It shows that the Freundlich isotherm is better in describing the adsorption process. Two kinetic models, pseudo-first order and pseudo-second order, were employed to analyze the kinetic data. It was found that the pseudo-second-order model is the better choice to describe the adsorption behavior. The thermodynamic study reveals that the enthalpy (ΔH⁰) value is positive (5.63 kJ/mol), suggesting an endothermic nature of the adsorption.     

Photocatalytic degradation of disperse blue 1 using UV/TiO2/H2O2 process

The photocatalytic degradation of a dye derivative, C.I. disperse blue 1 (1), has been investigated under UV light irradiation in the presence of TiO2 and H2O2 under a variety of conditions. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic technique as a function of irradiation time. The degradation was studied under different conditions such as different types of TiO2, reaction pH, catalyst and substrate concentration containing hydrogen peroxide (H2O2), besides molecular oxygen in the presence of TiO2. The degradation of dye was also investigated under sunlight and the efficiency of degradation was compared with that of the artificial light source. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient for the degradation of the dye.     

Inverse modeling of multicomponent reactive transport through single and dual porosity media

Compacted bentonite is foreseen as buffer material for high-level radioactive waste in deep geological repositories because it provides hydraulic isolation, chemical stability, and radionuclide sorption. A wide range of laboratory tests were performed within the framework of FEBEX (Full-scale Engineered Barrier EXperiment) project to characterize buffer properties and develop numerical models for FEBEX bentonite. Here we present inverse single and dual-continuum multicomponent reactive transport models of a long-term permeation test performed on a 2.5 cm long sample of FEBEX bentonite. Initial saline bentonite porewater was flushed with 5.5 pore volumes of fresh granitic water. Water flux and chemical composition of effluent waters were monitored during almost 4 years. The model accounts for solute advection and diffusion and geochemical reactions such as aqueous complexation, acid-base, cation exchange, protonation/deprotonation by surface complexation and dissolution/precipitation of calcite, chalcedony and gypsum. All of these processes are assumed at local equilibrium. Similar to previous studies of bentonite porewater chemistry on batch systems which attest the relevance of protonation/deprotonation on buffering pH, our results confirm that protonation/deprotonation is a key process in maintaining a stable pH under dynamic transport conditions. Breakthrough curves of reactive species are more sensitive to initial porewater concentration than to effective diffusion coefficient. Optimum estimates of initial porewater chemistry of saturated compacted FEBEX bentonite are obtained by solving the inverse problem of multicomponent reactive transport. While the single-continuum model reproduces the trends of measured data for most chemical species, it fails to match properly the long tails of most breakthrough curves. Such limitation is overcome by resorting to a dual-continuum reactive transport model.     

Lipid peroxidation in the presence of iron oxides

Exposure to iron oxides dusts may lead to lung cancers among exposed population. To evaluate the involvement of iron‐containing particles in lipid peroxidation by production of reactive oxygen species, hematite, magnetite (iron oxides), and crocidolite (asbestos compound) were tested. The peroxidation was followed by the evaluation of some degradation products of lino‐lenic acid. In a buffered medium, magnetite is higher active than hematite. The addition of an iron chelator (EDTA) or of a reducing agent (ascorbate) in this medium enhances the activity of hematite and magnetite, and the combination of both EDTA and ascorbate increases their activity. Crocidolite is the most active whatever the medium. The appearance of the EDTA‐iron‐oxygen complexes related to the reactivity of these oxides is postulated. These results suggest that the oxidizing activity triggered by hematite and magnetite, in a medium containing an iron chelator and a reducing agent, may lead to damages in biological medium.     

间接电化学降解亚甲基蓝废水的可行性研究

研究以ClO^-／Cl^-作媒介，间接电化学降解亚甲基蓝模拟废水的可行性。结果表明，亚甲基蓝的电化学降解与电极材料、电流密度以及添加剂种类等因素有关。以石墨为阳极，不锈钢为阴极，在无隔膜的烧杯中放置50ml浓度为1000mg/L的亚甲基蓝模拟废水，在室温25℃，pH6．0－8．0，槽电压10V，电流密度30．0mA/cm^2，Cl^-加入量2g/L的条件下，电解60min后，亚甲基蓝溶液的平均消色率达到98．0％，CODcr降解率为97．0％，BOD5降解率为99．0％；用浸涂过MnO2薄膜的石墨棒作阳极可显著加快其消解速率，而用浸涂过CeO2薄膜的石墨棒作阳极对其消解速率无明显的影响。并初步讨论了其降解机理。     

粗铜酞菁颜料生产中的三废治理

粗铜酞菁生产尾气中的氨可用硫酸吸收制硫酸铵,粉尘可用捕集器回收,废水采用物化与生化相结合的治理工艺,效果好,投资少,运行费用低,并可回收铜。     

兼氧混合菌对亚甲基蓝废水生物降解实验研究

采用厦门某生物科技有限公司提供的兼氧混合菌为研究对象,利用相关设备进行中试实验,验证了该项技术的可行性。同时探究了重金属对该混合菌种生物降解能力的影响,通过中试实验研究后发现5mg/L的重铬酸钾和硫酸铜均对该混合菌种的生物降解能力有一定的影响,并且硫酸铜的影响大于重铬酸钾。此外该技术对甲基橙、刚果红废水也有一定的生物降解能力,这为兼氧混合菌用于印染废水处理提供了实验依据。     

反应气氛对绿色合成纳米铁的组分及其活性的影响

成本低廉和无二次污染的"绿色"合成纳米材料是发展原位纳米环境修复技术的前沿研究课题之一.本文以绿茶提取液为还原剂和稳定剂进行"绿色"合成纳米铁,探讨在不同的气氛下"绿色"合成的纳米铁颗粒的主要成分,以期为调控合成纳米铁系材料提供基础研究.首先,利用扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线光电子能谱分析(XPS)和傅里叶变换红外光谱(FTIR)等表征手段对不同反应气氛下合成的纳米铁颗粒的表面微观形貌、尺寸和价态结构进行分析.结果发现,在通入N2情况下,合成的纳米铁颗粒粒径为(84.7±11.5)nm,其主要成分以纳米零价铁为主;在通入空气情况下,合成的纳米铁粒径为(117.8±26.2)nm,其主要成分是纳米零价铁、氧化铁和四氧化三铁的混合物;通入O2时,合成的纳米铁粒径为(141.2±26.3)nm,其主要成分以四氧化三铁为主.其次,评价在不同气氛条件下合成纳米铁颗粒对去除亚甲基蓝(MB)的反应活性.结果表明,在反应温度313 K下降解初始浓度为50 mg·L-1的MB溶液,反应5 min时已达到平衡,通入N2合成的纳米铁降解MB,去除率高达98.7%,而通入O2合成的纳米铁反应效率低,对MB的去除率仅为65.3%.最后,从以上发现提出不同气氛下可以调控"绿色"合成的铁系纳米材料成分,从而导致不同的纳米修复环境中污染物的能力.     

水环境中不同形态氮对甲芬那酸光降解影响机制的研究

研究了紫外光照射下水环境中不同形态的无机氮(NO-3、NO-2和NH+4)对甲芬那酸(MEF)光解的影响.NO-3与NO-2均促进MEF的光解,NH+4对MEF的光解基本无影响;在NO-3、NO-2存在下添加适量异丙醇,显著抑制MEF的降解,实验表明NO-3、NO-2在光照下产生了·OH并参与对MEF的氧化降解.同时模拟研究了水体处于不同p E值下,水中存在的不同形态的无机氮对MEF光解的复合影响,其对MEF光解促进作用不是简单的叠加关系,增大p E值,MEF的光解速率先增大后减小.当NO-2和NH+4共存时,对MEF的光解主要表现为NO-2的影响;当NO-2和NO-3共存时,两者对MEF的光解存在拮抗作用.     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.