矿物材料对餐厨垃圾厌氧消化的影响研究

在试验的基础上研究了3种矿物材料膨润土、斜发沸石、粉煤灰对富含钠离子的餐厨垃圾厌氧消化过程的影响.结果表明,在发酵温度为35℃、底物固含量(TS)为10%、添加物用量为1%(质量分数,以消化底物计)时,膨润土、沸石粉、粉煤灰对含盐餐厨垃圾的厌氧发酵消化液中的钠离子具有良好的吸附性能,吸附率分别为13.75%、10.11%、7.99%.在未使用无机矿物的情况下,当钠离子浓度为3000～4000mg·L-1时,含盐餐厨垃圾的的厌氧消化过程受到Na 离子的明显抑制.从产气量分析,3种矿物材料均能明显促进餐厨垃圾的厌氧消化过程,与空白对照试组相比,膨润土、斜发沸石、粉煤灰分别使产气量提高了131%、82%和45%.三者对甲烷气产量的促进影响强弱顺序是,膨润土＞斜发沸石＞粉煤灰.初步讨论了这3种矿物材料提高餐厨垃圾厌氧消化甲烷产量的作用机理.     

用水解酸化池-膜生物反应器处理活性艳红X-3B废水

采用水解酸化池-膜生物反应器处理含活性艳红X-3B的模拟废水,研究了水力停留时间（HRT）对水解酸化池废水处理效果的影响,考察了水解酸化池-膜生物反应器对废水的处理效果及膜生物反应器中污泥沉降性能对膜污染的影响。实验结果表明：水解酸化池HRT为16h时,废水的可生化性最好,挥发性脂肪酸质量浓度与COD比值为0．5;HRT为17h时,废水脱色率达69％,而COD的去除率受HRT影响较小;膜生物反应器主要起去除废水中COD的作用;水解酸化池-膜生物反应器处理后废水的脱色率和COD去除率分别为83％和97％;膜生物反应器中活性污泥沉降性能的变化直接影响膜污染的速率。     

玻璃弹簧负载镶嵌纳米粒子TiO2膜光催化降解活性深蓝K-R

以玻璃弹簧负载镶嵌纳米粒子的TiO2膜降解活性深蓝K-R模拟废水,考察了pH值和温度对脱色率的影响以及CODCr去除率与脱色率之间的关系,并用XRD和SEM对催化剂进行了表征.结果表明,pH值和温度对脱色率均有显著影响,CODCr去除率与脱色率的比值约为70%左右;XRD表明,TiO2矿相主要为锐钛型,SEM表明,镶嵌TiO2粒子均匀,粒径约50nm.     

基于连通法的甲烷简化机理构筑研究

采用连通法,针对甲烷复杂反应机理,成功地进行了不同水平的机理简化研究。通过建立组分依赖关系的正规化Jacobian矩阵,精确地查明了燃烧组分之间的耦合关系,分别构造出仅包含重要化学路径的两个动力学简化模型,获得的简化机理分别包含227和138个反应,分别涉及39和26种组分。通过对层流预混火焰结构的模拟,所得简化机理和原详细反应动力学机理关于火焰结构的计算吻合很好,计算结果显示,两个简化机理具有较高的模拟精度。     

Clam shell catalyst for continuous production of biodiesel

Continuous flow transesterification of waste frying oil (WFO) with methanol for the biodiesel production was tested in a laboratory scale jacketed reactive distillation (RD) unit packed with clam shell based CaO as solid catalyst. The physiochemical properties of the clam shell catalysts were characterized by X-ray Diffraction (XRD), Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy (SEM), and Energy Dispersive Atomic X-ray Spectrometry (EDAX). The effects of the reactant flow rate, methanol-to-oil ratio, and catalyst bed height were studied to obtain the maximum methyl ester conversion. Reboiler temperature of 65°C was maintained throughout the process for product purification and the system reached the steady state at 7 hr. The experimental results revealed that the jacketed RD system packed with clam shell based CaO showed high catalytic activity for continuous production of biodiesel and a maximum methyl ester conversion of 94.41% was obtained at a reactant flow rate of 0.2 mL/min, methanol/oil ratio of 6:1, and catalyst bed height of 180 mm.     

生活垃圾加载介质层填埋法对初期渗滤液污染抑制效果研究

以传统卫生填埋柱R2为对照,通过往生物反应器填埋柱R1内加载可渗透反应介质层1和2进行模拟试验,主要探讨了填埋柱R1垃圾渗滤液COD、总氮、氨氮及总磷的变化趋势,探索一种新型的加载介质层垃圾填埋处理方法。试验结果表明,填埋20周后, R1柱COD浓度基本维持在40 000～45 000 mg/L间,约为R2柱的20%～30%;第24周,R1柱总氮和氨氮分别为206.5 mg/L和167.3 mg/L,在16～24周内,R1总氮和氨氮分别约为R2的14.5%～17.5%和36.2%～43.6%;18周时,R1柱总磷达最大值1.704 mg/L,至第24周降为0.673 mg/L, 整个实验过程R1柱总磷约为R2的0.15%～0.56%。     

Inverse modeling of multicomponent reactive transport through single and dual porosity media

Compacted bentonite is foreseen as buffer material for high-level radioactive waste in deep geological repositories because it provides hydraulic isolation, chemical stability, and radionuclide sorption. A wide range of laboratory tests were performed within the framework of FEBEX (Full-scale Engineered Barrier EXperiment) project to characterize buffer properties and develop numerical models for FEBEX bentonite. Here we present inverse single and dual-continuum multicomponent reactive transport models of a long-term permeation test performed on a 2.5 cm long sample of FEBEX bentonite. Initial saline bentonite porewater was flushed with 5.5 pore volumes of fresh granitic water. Water flux and chemical composition of effluent waters were monitored during almost 4 years. The model accounts for solute advection and diffusion and geochemical reactions such as aqueous complexation, acid-base, cation exchange, protonation/deprotonation by surface complexation and dissolution/precipitation of calcite, chalcedony and gypsum. All of these processes are assumed at local equilibrium. Similar to previous studies of bentonite porewater chemistry on batch systems which attest the relevance of protonation/deprotonation on buffering pH, our results confirm that protonation/deprotonation is a key process in maintaining a stable pH under dynamic transport conditions. Breakthrough curves of reactive species are more sensitive to initial porewater concentration than to effective diffusion coefficient. Optimum estimates of initial porewater chemistry of saturated compacted FEBEX bentonite are obtained by solving the inverse problem of multicomponent reactive transport. While the single-continuum model reproduces the trends of measured data for most chemical species, it fails to match properly the long tails of most breakthrough curves. Such limitation is overcome by resorting to a dual-continuum reactive transport model.     

以活性染料为主要成分的印染废水的混凝脱色试验

用硫酸亚铁、碱式氯化铝(PAC)和聚丙烯酰胺(PAM)对以活性染料为主要成分的印染废水进行混凝脱色试验,阐述了混凝脱色机理,对脱色影响因素和控制条件等进行了试验研究.     

粉煤灰基层状金属氧化物对水中活性红X-3B的吸附

以粉煤灰(FA)为原料,采用共沉淀法制备了层状双金属氢氧化物(LDH)和层状金属氧化物(LMO,也称LDO),并采用XRD和BET技术进行了表征。比较了FA、LDH、LMO对活性红X-3B染料(X-3B)的吸附效果;考察了LMO吸附X-3B的影响因素,并探讨了吸附机理。XRD表征结果表明,LMO在吸附X-3B后重新恢复LDH层状结构。BET表征结果表明,LMO的比表面积大于LDH。吸附实验结果表明,3种吸附剂对X-3B吸附效果的优劣顺序为:LMOLDHFA;在初始X-3B质量浓度为50 mg/L、LMO投加量为2.0 g/L、吸附温度为25℃、吸附pH为7、吸附时间为30 min的条件下,X-3B去除率可达98.1%;LMO对X-3B的吸附符合Langmuir等温吸附方程,饱和吸附量为129.53 mg/g,且吸附过程可用准二级动力学方程描述。     

3种生物质炭对活性艳蓝KN-R的吸附简

选择由玉米秸秆、稻壳和稻草秸秆在825℃制成的生物质炭作为吸附剂,通过模拟实验,研究其对溶液中活性艳蓝KN-R的吸附特性,考察了pH值、时间、溶液初始浓度和生物质炭用量对吸附效果的影响。结果表明,当pH为2.0时,玉米秸秆炭和稻壳炭对活性艳蓝的吸附量均达到最大,而pH对稻草秸秆炭的影响不大;三者达到吸附平衡的时间分别为180、300和360 min,最大吸附量分别为114.05、54.60和68.19 mg/g。等温吸附过程可以用Langmuir方程来描述;动力学实验表明,吸附过程更符合拟二级动力学模型;热力学数据分析发现,吸附过程是自发进行的吸热过程。