Competition of bloom-forming marine phytoplankton at low nutrient concentrations

Competition of three bloom-forming marine phytoplankton (diatom Skeletonema costatum, and dinoflagellates Prorocentrum minimum and Alexandrium tamarense) was studied through a series of multispecies cultures with di erent nitrate (NaNO3) and phosphate (NaH2PO4) levels and excess silicate to interpret red tide algae succession. S. costatum outgrew the other two dinoflagellates in nitrate and phosphate replete cultures with 10 mol/L Na2SiO3. Under nitrate limited (8.82 mol/L NaNO3) conditions, the growth of S. costatum was also dominant when phosphate concentrations were from 3.6 to 108 mol/L. Cell density of the two dinoflagellates only increased slightly, to less than 400 and 600 cells/mL, respectively. Cell density of S. costatum decreased with time before day 12, and then increased to 4000 cells/mL (1.5 mg/L dry biomass) at NaNO3 concentrations between 88.2 and 882 mol/L with limited phosphate (0.36 mol/L NaH2PO4) levels. In addition, P. minimum grew well with a maximal cell density of 1690–2100 cells/mL (0.5–0.6 mg/L dry biomass). Although S. costatum initially grew fast, its cell density decreased quickly with time later in the growth phase and the two dinoflagellates were dominant under the nitrate-limited and high nitrate conditions with limited phosphate. These results indicated that the diatom was a poor competitor compared to the two dinoflagellates under limited phosphate; however, it grew well under limited nitrate when growth of the dinoflagellates was near detection limits.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

毛细管电泳中样品的在线富集

近年来,毛细管电泳以其速度快、效率高的分离分析技术受到越来越多领域的青睐,样品在线富集的方法有效的提高毛细管电泳由于进样体积小而造成的检测灵敏度难以提高的问题。文章简单介绍了毛细管电泳在线富集的原理,对其方法与应用进行了总结与概述。     

羟基磷灰石-四氧化三铁-沸石复合材料制备及去除水中刚果红研究

采用可溶性磷酸盐、钙离子、二价铁离子、三价铁离子和天然沸石等材料制备了羟基磷灰石-四氧化三铁-沸石(HAPFe3O4-沸石)复合材料,对该复合材料进行了表征,并考察了该复合材料对水中刚果红的吸附作用.结果表明,HAP-Fe3O4-沸石复合材料对水中的刚果红具备良好的吸附能力.当pH由3增加到4或由7增加到11时,HAP-Fe3O4-沸石复合材料对水中刚果红的去除能力下降;当pH由4增加到7时,对刚果红的吸附能力基本保持不变.HAP-Fe3O4-沸石复合材料对水中刚果红的去除率随吸附剂投加量的增加而增加,而对水中刚果红的单位吸附量则随吸附剂投加量的增加而降低.HAP-Fe3O4-沸石复合材料对水中刚果红的吸附动力学过程可以较好地采用准二级动力学模型加以描述,对刚果红的吸附平衡数据可以采用Langmuir和Freundlich等温吸附模型加以描述.根据Langmuir模型确定的最大吸附容量为117 mg·g-1.(pH 7和303 K).HAP-Fe3O4-沸石复合材料对水中刚果红的吸附是自发吸热并伴随熵增加的过程.当pH为7时,HAP-Fe3O4-沸石复合材料吸附水中刚果红的主要机制包括表面配位作用、氢键作用以及路易斯酸碱反应.采用热再生的方法可以使吸附刚果红后的HAP-Fe3O4-沸石复合材料得到再生,热再生后的复合材料可以循环使用并且对水中刚果红的吸附性能良好.X射线衍射分析结果表明HAP-Fe3O4-沸石复合材料含Fe3O4,磁滞回线结果表明HAP-Fe3O4-沸石复合材料具备较高的磁饱和强度,复合材料吸附刚果红后可以很容易地通过外加磁场的作用快速地与水溶液分离.结果表明,HAP-Fe3O4-沸石复合材料适合作为一种吸附剂去除废水中的刚果红.     

江西星子镇沙岭沙山顶部一处红色砂层的粒度分析及释光年代研究

鄱阳湖作为我国最大淡水湖,其周边分布若干沙山。此前研究多认为这些沙山为风成堆积的产物。选取星子镇沙岭沙山顶部（吴淞高程约58.3 m）一处红色砂层（含泥质团块）为研究对象,开展粒度分析和释光测年,以进一步揭示其形成环境和年代。粒度结果为：（1）以中粗砂为主;（2）粒度分选性差;（3）频率分布曲线显示该红色砂层包含多峰;（4）概率累积曲线显示该红色砂层包含1个推移组分、2个跃移组分和4个悬移组分;（5）萨胡判别公式值均>-2.74。之后,对红色砂层下伏泥层、红色砂层和红色砂层上覆黄色砂层开展石英单颗粒释光测年,其年代分别为：(24.7±2.1) ka、(24.0±2.4) ka和(22.4±3.9) ka。研究表明该红色砂层虽然形成于MIS2阶段,但其不是干旱环境下的风成沉积砂层。     

“T”型地铁换乘站多点火灾工况下综合火灾危险性研究

为探究大型地铁站多线路火灾场景中的综合危险性,采用火灾动力学软件FDS构建“T”型换乘站全尺寸模型,对不同火源位置、不同火源功率以及是否开启地铁排烟风机等12组工况进行数值模拟;采用性能化方法确定可用疏散时间,并通过综合火灾风险评估方法计算各工况总安全指数。结果表明:1号线站厅层和2号线站台层双点火灾为最不利火灾场景;1号线站台层和2号线站厅层双点火灾为相对安全火灾场景;火源功率的增大会增加地铁火灾危险性,但不同火源位置工况中的安全指数变化趋势相似;排烟模式开启前,1号线站厅层火灾会导致较大的火灾危险性;排烟模式开启后,地铁总安全指数显著上升且安全指数变化趋势改变,此时2号线站台层火灾会导致较大的火灾危险性。     

拉萨河夏季氢氧同位素空间分布特征及分析

稳定同位素示踪技术是河流水文过程研究的重要方式,可以用来判定河流补给的来源、研究河流与其它水体相互作用、示踪水文循环过程等.本文采用TC/EA-IRMS分析法对拉萨河水体的氢氧同位素进行测定,分析了 δD和δ18O的含量及空间分布特征,并分析了拉萨河的同位素效应,包括与大气降水氢氧同位素的关系、氢氧同位素的沿程变化特征...     

染料废水电催化氧化及降解动力学研究

以新型钛基二氧化铅电极为阳极、石墨为阴极、活性炭-纳米二氧化钛为催化粒子电极降解染料模拟废水酸性红B溶液,考察了槽电压、pH值、催化剂量等对处理效果的影响。实验结果表明:纳米二氧化钛催化剂的催化效果显著,该反应器能够有效的降解酸性红B,降解机制主要是电致H2O2、.OH对有机物的氧化、降解。同时用一级反应拟合了酸性红B溶液COD去除反应,由实验数据确定了反应动力学方程。     

含有机物铁泥的超临界水氧化法资源化

氨基染料生产过程中产生大量含有机物的铁泥,对环境造成严重污染并造成资源的极大浪费.利用超临界水氧化法对含有机物铁泥进行资源化处理研究,并对产物进行了X射线衍射分析(XRD)、色差实验与电子探针分析.研究结果显示,用超临界水氧化法处理铁泥可以将铁泥中所含的有机物完全氧化,真正实现环境友好;超临界水首先将铁泥氧化成α-Fe2O3与γ-Fe2O3,再经过800℃煅烧后可以作为氧化铁红颜料使用;超临界反应压力对样品的晶型与颜色影响不大.     

铝业赤泥免烧砖中试生产及产业化

利用铝厂赤泥、自备电厂粉煤灰、矿山石渣为主要原料在国内第一条赤泥砖生产线上进行了中试生产,采用了自然养护和蒸压养护两种生产工艺。自然养护的赤泥免烧砖达到了非烧结普通粘土砖标准(JCT4221991)(1996)中15级要求,蒸压养护的赤泥免烧砖达到了蒸压灰砂国家标准(GB119451999)中优等品MU15级的要求。通过成本核算,自然养护的赤泥免烧砖的生产成本能够控制在0.11元块以下,蒸压养护的赤泥免烧砖的生产成本能够控制在0.14元块以下,具有较好的经济性。